FJ CRUISER WARRIOR BUMPER INSTALL

[@alwayshungrylo9692]

This is really helpful. I got the same bumper and winch combo. Thank you . I always come back to your video

[@colorado4x4adventures62]

Thanks!!

[@Tsalinger]

Just take 10 minutes and tack weld 2 nuts on the back side of the bumper for your fairlead. Saves time when you need to change it out.

[@kingcraven8056]

Really. I have boxes of flanged nuts and put them everywhere. I also don't go crazy with the welding so their easy to get off if they strip.

[@johntyson1840]

Is that the Smittybuilt X20 10k or 12k unit? I have my winch installed but haven't mounted the bumper yet. Hope I dont have to trim anymore off the grill than you did

[@colorado4x4adventures62]

I have the 10 k . Hope you can fit it nicely 👍✌️ thanks for watching!

[@lyric.kayden]

Hi, I know video is old but I do have a question or two. I see it looks like you have OME lift possibly. Was your OME lift if that’s what it is Heavy load for bumper and winch or was it a Medium or Light? And if so did you experience any sag or whatever with extra weight? Thank you

[@colorado4x4adventures62]

Hi i beleve i have havy set of the shocks there is a video of the shocks and springs on my chanel . I also have spc upper control arms which brings the front another half inch up . If you do just the suspension with stock upper arms you can see how it’s nosing down even with stock bumper. It’s just sitting that way. So recommend getting the UCAs too it will make a big difference 👍 i do a lot of off road and absolutely love the OME set up . It’s affordable and lasts for ever . Bunch of my friends have expensive set ups and breaking things all the time. I never had a single problem. And i am sitting on 285/70/17 (33s) thanks for watching my videos pleas subscribe and enjoy the channel 👍

[@ohnodevo]

@@colorado4x4adventures62 And here I was about to ask the same question (as well as model year)...and here it is answered. Thanks for the info and the "whoopsies" along the way. Hits home hard to measure twice cut once. :-)

[@colorado4x4adventures62]

@@ohnodevo glad this helped you out 👍

[@cash4myproperties]

Looks great. I know it was just posted today but do you notice a decrease in gas milage? Mine stock i a heavy drinker.

[@colorado4x4adventures62]

I DONT KNOW YET :)

[@POPPASHANGO]

Looks Great! Thanks for posting this!

[@colorado4x4adventures62]

POPPASHANGO thanks! And welcome 👍

[@pkginbro6456]

PO" PPASHANGO V

[@jeraldjosey7592]

Great looking bumper, nice job

[@atumko]

What is the model year of this FJ? And thanks a lot, the video is really helpful!

[@colorado4x4adventures62]

Hi thanks ! The fj is 07

[@GXPedition460]

How much was the bumper and the winch?

[@colorado4x4adventures62]

Hi I have some discount on it but you should de able to get it around $ 1500

[@edsonkidwell2522]

Hey guy read the instructions duh