25mm Revolver - Hand Cannon

Can it be used with Nerf War?
Patreon - / flasutie

[@Flasutie]

Files on Patreon! : www.patreon.com/Flasutie

[@DramaticBatu]

Do russian roulette with this

[@wtuwotl]

Will I be able to find instructions and models from your videos in Patreon? @Flasutie

[@deimos8058]

please note, it looks more like a grenade launcher! this is very cool!

[@paleogeology9554]

Id assume you too are single and have far too much time on your hands lol

[@blob-like_Frog]

То есть это "игрушечное" оружие с гильзами и поджигом горючего вещества для выстрела? Поздравляю, ты буквально создал огнестрельное оружие. Настоящее огнестрельное оружие. Запрещенное по закону. Надеюсь тебя не забанят и не посадят в тюрьму, было бы обидно Успехов в дальнейших разработках и не повторяй такую ошибку больше никогда

[@kainepeterson6638]

The shell drop after you ejected all the cartridges was the stuff dreams are made of

[@awesomesauce-kg9xn]

The sound of the casing dropping were on par with the ping

[@EAFSQ9]

8:12

[@MightyBug999]

God imagine metal ....

[@Obs3ver]

Music to my ears

[@Zyron_Guy01]

For some reason it sounds similar to a used 12 gauge shell bouncing on the ground but still...it sounds delicious

[@brennonlewis]

Texas Red: "I've killed 20 men, what makes you think you're different?" The Arizona ranger:

[@zensan453]

this comment is so severely underrated

[@brennonlewis]

@@zensan453 thank you

[@Klezzr]

big iron on his hiip! 🎶

[@Nikofoxreal]

@@Klezzrbig cannon at this point

[@kyleshepard3139]

*Unholsters THE BIGGEST IRON*

[@coldenttube9904]

Man's out here on his way to make an astartes bolter

[@potatortheomnipotentspud]

*T H E E M P E R O R P R O T E C T S*

[@arsenyjsharov2239]

Greetings! It's 25mm, so it's more like a heavy bolter.🤓

[@peter_quill6347]

More Like an Revolver Bolter, but still cool. FOR THE EMPEROR!!!

[@robolizard222]

Well, now that you mention it…. Yes, he should make a bolter.

[@Kcthetransgirl]

Just as the God Emperor intended

[@night_sniper5754]

I love that the barrel is aligned with the bottom of the cylinder, which is a real trick used on high caliber revolvers to improve recoil handling, since the gun gets pushed more directly over the center mass and into your hand, rather than twisting up. Even for something as simple as this, as some people called it, "toy" with barely any punch to it, bro went with engineering thoughtful design.

[@joemogley]

I think thats actually kinda a design fault. This is a gun without a lot of recoil so using a bottom barrel doesn't make sense , and keep in mind bottom barrel revolvers aren't objectively better. First and most importantly, the inner mechanics need to be much more complicated when using a bottom firing revolver . Lots more moving parts. More points of potential failure. For something like this, printed out of 3d printed plastic which is more prone to jamming or getting caught, that's a serious concern. Also, while this prolly doesnt matter here, height over bore - the sights on a bottom barrel revolver will always have a more strict zeroing distance.

[@_cryobyte]

nimko spaghetti

[@UselessZero]

​@@joemogley they aren't more complicated in this case as it's electrically ignited. The only real flaw, imo, is that trigger is relying on a bolt to make contact with 2 wires inside of the frame. Better solution would be to use a contact switch.

[@theguywiththeoldds3896]

I don't think the faults are a concern as he lights it with a switch, sights however is a great point but also the bulky design might encourage people printing this with no gun knownledge to grip the front and burning their hand/forearm on the cylinder gasses

[@felixsheep]

When ultrakill into the fire starts playing:

[@michaelmackenziemathews]

What's ultrakill

[@Xormage]

​@@michaelmackenziemathews Doom, but three times as fast and your a robot

[@V1_Ultrakill_890]

Hello V2

[@V1_Ultrakill_890]

@@Xormage Ultrakill in a nutshell

[@felixsheep]

@@V1_Ultrakill_890 Dude, you still didn’t give back my arm.

[@thetengu431]

That slug spinning like that means your rifling actually works, holy shit lol.

[@thetengu431]

Search "bullet spinning on ice" and you'll see what I mean.

[@FirstnameLastname-qy9gx]

@@thetengu431im gonna kiss you

[@Moo2loosCavern]

@@FirstnameLastname-qy9gxwhat the hell?

[@FirstnameLastname-qy9gx]

@@Moo2loosCavern you jealous or something?

[@Moo2loosCavern]

@@thetengu431 *OF COURSE I AM!*

[@wavelengthdesigns]

My brain is a simple machine, I see a comically large revolver and click.

[@Swordiy]

Exactly

[@4elements279]

It is not comically large, its the way it should be, but there is no one brave enough to make it.

[@Zer07ofwar]

Women Say we want disgusting things I wanted to see a giant revolver being made

[@cactusgamingyt9960]

>machine

[@4elements279]

@@cactusgamingyt9960 this comment made me hear a coin being flipped

[@pevznerok]

Gunner's revolver from Deep Rock Galactic. Rock and Stone!

[@gabrielneves6602]

DID I HEAR ROCK AND STONE?

[@pevznerok]

@@gabrielneves6602 Rock and Stone to the bone!

[@undersky596]

Karl approves

[@evangold4748]

ROCK AND STONE!

[@boxfoxscoot1614]

it aint a gun unless it ways at least one hundred pounds

[@the_crum]

UNDERTHEMAYO HAVING A FIELD DAY WITH THIS ONE 🔥🔥🔥

[@CreepyPersonCube.]

Our hero loads his revolver with great stealth. (SQUEAK) (SQUEAK) (SQUEAK) The Badguys: "Hey who's reloading over there!?"

[@SueDonym-qx7or]

Not so much about stealth as it is ease of production.

[@CreepyPersonCube.]

@@SueDonym-qx7or I'm just easing, it's actually a very cool project.

[@donovanchau3483]

I love the sound it makes even with no ammunition, the friction of the plastic and the echoing of the electrical arc is very sci-fi

[@dubeard4360]

Hellboy's Good Samaritan got one Hell of an upgrade.

[@nocturnalrecluse1216]

Beat me too it. 😂

[@InternetGravedigger]

I was thinking he probably wants his gun back...

[@jaredphillips129]

I was thinking the same thing

[@just5fornow]

*calming jazz plays in the background as Flasutie makes a 25mm Revolver Hand-Cannon*

[@aronjaeger]

exactly what i thought 😂

[@SpadesofAllJacks]

We'll need to keep this in mind for when MANKIND IS DEAD, BLOOD IS FUEL, AND HELL IS FULL

[@thatgamingkiwi1630]

My man made the ULTRAKILL slab revolver.

[@invaderjoshua6280]

On one hand you made it onto the ATF’s watchlist, on the other hand you made it onto the God Emperors favorite sons watchlist as well. Well done.

[@kriegen632]

The ATF watch list is the favourite sons of the God emperor list

[@justafan9206]

​@@kriegen632"kid, you _are_ the watch list."

[@Voidi-Void]

​@@justafan9206i thought... _I_ was the watch list... 🥺

[@Dankster-yo8xv]

​@@Voidi-Voidwe're all the the watchlist

[@rosiechavez2615]

I wish i was on the god emperors favorite son list

[@deeznucz8639]

-That's a M8 flare revolver with 37x94 Hotchkiss shell don't fit bud. -HAHAHAHAHHAHA YOU WISH YOU WERE RIGHT

[@marcorocchi6758]

POCKET MORTAR

[@Xtoxinlolinecronomicon]

😂 yeah, this is how it starts, and ends with a grenade machine gun

[@allanjarnagin3540]

Don't threaten me with a good time

[@deinocheirusgaming6920]

Ah, /k/. Saw someone make a crossbow that fires .50 BMG rounds on there the other day.

[@TheManglerMaster]

​@@XtoxinlolinecronomiconAnd those actually exist lol

[@Logansnovasticos]

Everyone is just talking about ideas, admiring it, and all i see is ULTRAKILL Revolver

[@Dinnerboneearthmover]

YES

[@Yesnaught]

It's pretty chunky for Ultrakill...

[@user-tk5mh6hk4n]

Оооо да

[@Nicotrie]

0.5m coins:

[@jonnythonmccrapballs3112]

Was waiting for someone to say that

[@reverentgarbage6677]

This guy just has a 3D printer, electrolysed water, and a dream

[@Fireheart1945]

"I don't want to hear it, McBain. That, that cannon of yours is against regulations! In this department, we go by the book." BAM "Bye, book."

[@SausagecatChannel]

25mm cannon always sounds bigger than one inch gun

[@SausagecatChannel]

Haha Still think the metric system is clearer to most than gauges and bores at least :)

[@AlyssMa7rin]

Umm, isn't 25mm the same as a 1 incher?

[@DragonJohn]

"Meh, its only a 1 caliber"

[@cfilorvyls457]

​@@AlyssMa7rintechnically, not really

[@themadscientest]

@@DragonJohn 100 caliber, 1 caliber would be 1/100th of an inch.

[@Tnker69]

Literally the ULTRAKILL revolver

[@ripic100]

This gentleman crafted its own marksman, we gotta respect that

[@Double_Cells]

@@ripic100 Indeed

[@budgetcommander4849]

The ULTRAKILL revolver actually fires tiny slivers of metal.

[@Spyanter2000]

@@budgetcommander4849He’a just referring to the visual similarities but yeah. You’re right on that

[@ReyHunter]

a little larger in size

[@Sheryl_krabbenhoft]

I’m a massive gun nerd and I am both impressed, intimidated and jealous, that’s incredible

[@gangstablook5846]

Are you a massive gun nerd, or a nerd for massive guns

[@Sheryl_krabbenhoft]

@@gangstablook5846 yes

[@Servellion]

1mm short of basically being the Gunner from Deep Rock Galactic's revolver.

[@makeandbreakgames1791]

ROCK AND STOVE BROTHA

[@hodgepodge9362]

The most cursed thing about this is the barrel is underneath. Great work I love it.

[@SniperOnSunday]

There are actual revolvers like that, though.

[@nhtheintrovert5679]

Make a speedloader so you can load the cylinders all at once

[@thatoneultramarine208]

Kinda feel like he shouldn’t considering those rounds are as long as my forearm, lugging around a speed loading cylinder would probably slow down the reload.

[@wire3989]

Just change the whole cylinder

[@thatoneultramarine208]

@@wire3989 You do realize carrying around a whole cylinder would both make the revolver more complex and worse to carry right?

[@Gojiro7]

I think think its fine how it is, after all Revolver Ocelot once said kzbin.info/www/bejne/gpuahpmdjL57n7ssi=zkwl-vAS3nkxivNe&t=10

[@tristanbulluss9386]

I have a picture of a ghost on a tv.

[@marcorocchi6758]

This is something straight out of Fallout

[@PlutoTheSynth]

I'm p sure this looks a lot like the 10mm pistol, except it's 25mm and a revolver

[@colthosen9967]

Facts

[@ilikelegoandstuff]

Fr

[@deznut564]

Kinda reminds me of the 14mm pistol

[@kiokyyikune]

.223 revolver + 14.7 pistol

[@GusCraft460]

Because of the scale you are working at, a replica 40mm grenade launcher, like the China lake, might be a fun project.

[@ВерныйСоюзник]

You mean one that is modification of sniper rifle? BTW, US have manufactured a few of AWP with 25 mm caliber for smart granades.

[@GusCraft460]

@@ВерныйСоюзник no, I mean a 40mm grenade launcher like the China Lake. Also nobody adds a grenade launcher to a sniper rifle.

[@DH-xw6jp]

​@@ВерныйСоюзникno, the China Lake is a pump action 40mm launcher.

[@SomeAzureDude]

My man just created the ULTRAKILL revolver

[@illusealrr1006]

O2 is heavier than air. It is not possible to retain the ratio when you do 0:52.

[@Hi_Buddy-cw6pl]

Hear me out: 25 mm revolver, with the American 25 mm APFSDS cartridge from the Bradley

[@webelosevilos]

Man portable armor piercing bolt pistol

[@bsod4144]

uu thats a good one maybe even make necked down cartrige aswell

[@glubglub7982]

@@webelosevilos”I ain’t asking, cuh. Now show me them pocke-“

[@fallingwater]

Recoil: yes

[@MistakenForBigfoot]

Actual bolter pistol

[@3dpprofessor]

Looking at the video frame-by-frame, the riffling seems to be working. The bullets are flying straight and not tumbling until they hit. I'm impressed. I'm impressed. This might not take down a target, but it does shoot. Not bad for a little plastic and electricized water.

[@the866-sushi]

Good sir was so impressed he said it twice

[@DukeRevolution]

🎶Oh, he might have went on living but he made one fatal slip When he tried to match Flasutie with the print'd gun on his hip 🎶

[@kathiecraig2803]

🎶print'd gun on his hip, print'd gun on his hip🎶

[@Old_Sport-e2q]

thats a godammn Ultrakill piercer revolver 😭🙏

[@BrekekeReal]

I've been lookking for this comment

[@Old_Sport-e2q]

@@BrekekeReal Hello fellow Ultrakill fan 🤑

[@joaquintapia8664]

That's a really well tuned printer, those tolerances are insane

[@gogodogodo3283]

Ultrakill reference question mark

[@a.sidrino]

Slab piercer moment

[@jme7046]

Nah, more like Warhammer 40k reference

[@uuuh_ok1]

does look similar

[@YourWaterDispenser]

swiggity swooty

[@agent26105]

I was scrolling through the comments specifically to find someone who saw it as the ULTRAKILL revolver, all that’s left are the coins

[@abbyjohnson2613]

The fact that this is all 3dprinted is insane

[@viviblue7277]

I don’t think the metal components the springs are. Still very impressive.

[@matthewbennett1972]

House Goliath will take a whole case

[@voin5371]

I love the design of this, feels like a sci-fi interpretation of a Smith & Wesson designed to go through anything its pointed at. Edit: Got the name of the company wrong.

[@notnurfcreanga]

it reminds me alot of the ultrakill stock piercer

[@captainmavic6310]

Smith and Western sounds very futuristic to me...

[@ST-zm3lm]

Smith & Wesson

[@mittromney7614]

@@notnurfcreanga🤢

[@SlinkyD]

An old boss put two coworkers next to each other because they had those names. Best work joke after the rest of upper management.

[@communistpigeon7]

Me when "MANKIND IS DEAD, BLOOD IS FUEL, HELL IS FULL":

[@isayokayokayokayokiedokie]

all fun and games until a robotic angel screams heresy at you

[@hydrolox_rl10b-2]

I woner how much of the hydrogen escapes from the casing before firing

[@aidenanderson4661]

It isn't pressurized so probably not that much.

[@bsod4144]

very minimal maybe 1% of power if that...hydrogen rises so its essentially trapped

[@delphicdescant]

@@bsod4144 Hydrogen has a very easy time escaping from almost any container. It can probably find its way straight through that plastic, nevermind the big gaps. If these casings are filled with hydrogen and then left for a few minutes in the cylinder, they'll probably lose a decent percentage of the charge. If you left them overnight, they might not even work the next day.

[@bsod4144]

under pressure that is@@delphicdescant

[@metalpoutineqc5531]

​@@delphicdescant I think if he use gun powder it's going to be more reliable

[@LordLaberstein]

Wait, you know what the design of this reminds me of? ULTRAKILL!

[@ChineseCaseoh]

C O I N

[@1000-THR_-EARTHMOVER-]

*insert ultakill war without reason (7-4 theme) here*@@ChineseCaseoh

[@shadowx7400]

Machine turn back now!

[@S_N_O_W_U_Y]

V1 would like to have a talk with you.

[@justatankwithinternetacces8338]

EXACTLY the first thing that came to mind is The percier from ultrakill

[@angyboi7969]

Well, time to order one and dive into hell in search of blood… wait this isn’t the ultrakill revolver? Ohhhhhhhhhhhh

[@348_neoh]

2:00 now thats what i call a successful launch

[@youraveragemedicmain866]

this guy gives robbers a smith and lesson the way he can just launch cannons and stuff

[@A_Bumbling_Buffoon]

Max0r Reference?1!?!1/1!?!

[@Ti_kriss]

8:01 this show that the rifled barrel does its work because we can see the bullet spinning

[@bsod4144]

yup same as what happens when 9mm hits ice and spins

[@user-fp1nd4cb6k]

Officer, as a completely sane and law abiding citizen in no moment of my life did I consider making a metal variant of a 25mm revolver with life ammo. Now please can I get my ammonia shipment and compact high temperature furnace back? I really need to fertilize my garden and I promised my wife to fix her fireplace railings by Christmas

[@miguelcarunchod.1493]

5:12 Important tip: Normal gun barrels need to be twisted counter clockwise if the inside barrel's carved twist spiral is clockwise. Otherwise the barrel will get loose for every shot. I see inside carvings clockwise and barrel clockwise in the video, not a good combination.

[@That1menace]

It looks like something HellBoy or a Astartes would use, I love it!

[@Panthera_Leo_]

I'm both very interested and a bit terrified if you ever start messing with pressurized HHO

[@totallynotminx4682]

DON'T GIVE THEM IDEAS LOL

[@ninjaguy1397]

He did do a grenade video so😅

[@Leonarco333]

Hmmm. A 3D printed double screw compressor. I like that idea.

[@emptyarthaus9535]

With a large "heavy" projectile a higher twist rate on the barrel may be more preferable. The higher rotation speed may help stabilize the projectile. In addition there may be some benefit to adding some indented rings on the rear of the projectile as well. Very cool toy youve made. 😊

[@_TheMushroomMan]

This thing isn't even a toy or anything anymore, This is just straight up a weapon. Imagine having a nerf war and one of the kids pulls up with this thing.

[@iceypumpkinhead]

"You can't be that comically large and expect to be effective in combat" said the gunsmith. *"KAPOW"* said the 25mm revolver. *"KABOOM"*

[@Ratscallion_exe]

This is no longer just a revolver. This is a hand-held 4 gauge slug/grenade launcher

[@wanderingmercurymarauder761]

Still a revolver. We already have a 40mm revolver in the form of the M32.

[@sporperino]

theres a ton of room for a telescopic/folding stock and maybe a foregrip mount, pretty cool!

[@frydemwingz]

you could make sabot rounds for this and it would probably be a lot more dangerous. You could have a 10mm steel ball bearing be the projectile and a plastic shell around it that will fly away.

[@conanhighwoods4304]

Can you test out your theory on that spiffy ol' show of yours? Best gore in the world.

[@somepunkinthecomments471]

Dude, this thing is a toy. Why would he make it more dangerous?

[@cmmpr111]

​@@somepunkinthecomments471Because it would be cool.

[@NotKameron]

You really want em to make the m3 Bradley’s 25mm bushmaster don’t you?

[@somepunkinthecomments471]

@@cmmpr111 If you think hurting people is cool, you need to reevaluate your life.

[@Miss.Circleeeeeeeeee]

"HUMANITY IS GONE" "BLOOD IS FUEL" type gun

[@makeandbreakgames1791]

HELL IS FULL

[@victempest5908]

Shawdy made the whole ahh ultrakill piercer revolver

[@BananaQuillaBonfire]

now he needs to bounce the bullet off a coin and see what happens

[@thefrogyeti]

My man built a Goliath Stub Cannon, mad respect

[@devil_master1562]

I know there's nothing wrong with this, but something about it just feels illegal

[@sourest_saurus]

the high voltage ignition seems like the illegal part

[@Ishiiru6884]

The US have created that feeling.

[@Waterishloki100]

bro made the ultrakill revolver

[@Zane12ai]

This video douples as a guide to making a handheld anti-vehicle cannon to anybody in possession of a milling tool

[@AlexDoesStuff-d1x]

I must get my hands on this comically large ULTRAKILL revolver

[@ForeverFree2Play]

Hearing those shells drop was pure euphoria 😩

[@ollanius_papyrus80]

Total amateur suggestion, but you might consider tapering the casings ever so slightly to aid extraction.

[@javibu1691]

Life goals

[@mathdarven5634]

Engineering department: Eng1: Hey I made plans for a 25mm revolver. Eng2: Ok, let's 3D print that on break time. It will be fun to test it afterwork. R&D department: R&D guy: Hey wassup, I need you guys to manufacture this set of pieces. In metal. Engineer: ... Ok? What is it for? R&D: Eh, R&D stuff, don't worry about it. *One week later* Eng: Ok, what the F is going on with your last order?! R&D: It's perfectly fine, it's just for a project we have. Eng: And why do you need 25mm ammunition for this project?!?! R&D: ... Reasons...

[@Revenge221]

Now all that's left to be crafted is a *speedloader* for the 25mm cartridges! Haha.

[@miwe4922]

cool projects man, keep it up!

[@Solstice_AC]

Russian roulette is gonna be wild with this one

[@WHTactics]

Mans just made a BOLT-Revolver

[@Futura_Light]

Such a cool project! I'd like to see a fast loader or maybe a moon clip for those shells

[@gwotkid8314]

Fascinating work, however you might wanna try a more traditional top-cylinder firing system. The benefits of shooting from the bottom cylinder (reduced recoil, capability to use break-top loading without stress fractures) aren't really doing anything with a low power system like that. If you fired from the top, your barrel would be a lot closer to your point of aim, leading to much better accuracy at range. I'll admit bottom-cylinder revolvers do have a certain style to em tho lol.

[@doctorpobrezahd3625]

Okey but can you shoot a coin in the air with it?

[@ChiefWombatCuddler]

It's like a giant Mateba, how beautiful

[@Igi777God]

ULTRAKILL REFERENCE!??!?!?!

[@krzosu]

riffling on a project like this is kinda more of an obstacle than a pro :P

[@HelluvaOpp]

Bro pulled out the Ultrakill revolver no way

[@LolCat361]

Cool, but does it come with coins?

[@danielstarr2483]

1 suggestion: I know nothing about revolvers, but wouldn't it be slightly better to have the cylinder revolve *after* the shot? That way there's less delay between trigger pull and firing.

[@Leonarco333]

Yes but it’s much more complicated to do. Thats why real double action revolvers spin the cylinder before firing. Single action revolvers are similar. Both spin the cylinder when the hammer is drawn back. This design doesn’t have a hammer and is electronically fired. I’ve spent dozens of hours working on this problem and making it function the other way is extremely difficult.

[@lordkaczuha4598]

this revolver look kinda like the piercer from ultrakill

[@kritkongsup6607]

Ya

[@Skeptical_Numbat]

This is one cool beast. Do you plan to paint the surface with a stylised texture to make it look like a cartoon gun, something from a fantasy movie, or even with a pseudo-nickel plating..? It's also fascinating to see all of the different 3D printed materials working in one integrated design. I'd love to see you design a sniper rifle that's capable of hitting a precise target at 100 metres.

[@imsomeonesomewheresomehow]

so THAT’S a where the funky gopro robots got it

[@player-vv9sm]

Bolt gun soon ?

[@exo068]

Oh cool, can you load it with your older projectiles that you made?

[@BoZoiD57]

Cool video! Absolutely despise that plastic on plastic scratching sound when you were putting it together and loading/unloading.

[@justicebrown1077]

25mm is large enough to use sabot rounds, making it incredibly effective against armor (if this was designed as a firearm and not a toy). Imagining like a Space Marine with this as they tear through 'nids or 'crons. Beautiful design

[@dimitribale1201]

I would say this is the big iron but i think that "big plastic" fits better

[@davesnothere420]

Haha! I totally freaked out when i saw the title of this video since i used to be a Cav Scout in the Army and the Bradley we used has a 25mm chain gun on it and those rounds, if fired from a pistol, would take both your arms off, they're friggin massive. The M242 Bushmaster that fired the 25mm is 9 feet long...

[@rafakisaa1869]

WE'RE BRINGING FALLOUT WEAPONS TO LIFE, WITH THIS ONE !!!

[@kuddlykraken2157]

I think we all would love to see this as a Bolter!

[@elijahbrown3096]

as unique as this thing is, I find it amazing that it's a bulldog revolver. Those are cool (I think the correct term is bulldog, idk. I mean that the barrel on the bottom)

[@superclaymaster]

Dudes going to get job offers from Mattel and Smith and Wesson in the same week.

[@pyotrvelikiy1816]

Love it, got to imagine a piezoelectric igniter would reduce complexity a bit.

[@That0neDragon]

I love how its bottom cylinder fired instead of top cylinder fired like most revealing good work

[@SueDonym-qx7or]

Between this and your other projects, I have a feeling you're somehow going to make a nuclear bomb eventually.

[@wantnotwant]

First rule of gun safety is have fun. Second rule is check the power by using your hand.

[@lohunterbyron3514]

Damn, man’s the reason they’re going to be selling ammunition in the toy section. He corrected the timeline.