FLEX HEAD RATCHETING WRENCH SET SERIES, RECAP,I reviewed (9), DIFFERENT BRANDS! THE GOOD, THE BAD!!🧐

[@FixItWithMe]

That purple Matco is gorgeous!!! soo excited that u reached 10,000k!!! Congrats Jeff!! ❤

[@jefftovani5535]

Good luck in the giveaway girl!!

[@Randyplaysguitars]

Just noticed....10,000 Jeff! Congratulations 🎉🎉

[@jefftovani5535]

Yea just hit it!! thanks Randy!!

[@robhudson5498]

That purple matco ratchet is gorgeous.

[@jefftovani5535]

Sure is rob!!

[@stansbruv3169]

I love it Jeff. Thanks for reviewing and sharing! I picked up the Workpros a few years ago to do some work inside my own garage and other than the pretty finish getting scratched and nicked from time to time they’re definitely worth the $30 (thirty freaking dollars!!) that I spent on them. I might check out the Duratech brand when I need a longer wrench. They’re also (VERY) affordable!

[@jefftovani5535]

Thank you stan for sharing that!!!

[@michaellindsay8934]

Nice options on the back row, I like the Olsa set. Thanks Jeff

[@jefftovani5535]

Olsa set is sweet!! thanks mike!!

[@Fly-Wadea]

Thanks for this video and the detailed explanation i am actually in the market for a nice mid range set of flex heads so this video helped me out a lot. Thanks again 👍

[@jefftovani5535]

Glad i could help!!

[@GTIFabric]

Williams is always the no BS answer. Good stuff.

[@jefftovani5535]

Yes sir GTIF!!!

[@charliepadula3638]

I like the Williams, no skips and a reversing lever.

[@jefftovani5535]

They are nice!!

[@ihavethedocuments2580]

Nice review Jeff At least the cold weather is half over, the glass is half full 👍

[@jefftovani5535]

I hear ya about the weather,thanks my friend!!

[@brandonm6052]

Manufacturers....Just. Quit. Skipping. Sizes. I dont care if I dont use them, I want a complete set. Sincerely an SAE guy on behalf of us and the metric guys.

[@richharr]

Amen

[@SofiaisSunshine]

Yea only time I dont want a complete set is in my compact travel set where I only want the necessities

[@Roger_Icce]

Most professional sets are complete, it is mostly the lower cost sets that are incomplete. You tend to get what you pay for...

[@brandonm6052]

@Roger_Icce the one thing that really only affects me is even snap forgets 1/4" wrenches and starts at 5/16. Or sets will be 5/16-3/4. I want 1/4-1 at least even outside regular combo wrenches. Tell me I'm a whiner without telling me I'm a whiner.

[@larrydudgeon2846]

I just don't get it why grown men get their panties in a bunch over skipping sizes. You do know that some sizes are pretty much the same size or very very close. I just don't get it why grown men cry so much anymore. Sound worse than...... Well I'm not going to say 😂😂😂

[@SilentCanary]

Wow Jeff! You’ve been pumping the content out!! Thank you sir

[@jefftovani5535]

Yea i dont take off to many days!! thank you Canary!!

[@blazebrady3659]

Thanks for another great review, Jeff! Much appreciated!! 👍

[@alcerz984]

I found a JH Williams superjustable vintage wrench at a thrift shop but the adjustable part still has a little play in it. I was surprised. I paid 2$ for it, sanded the rust off and put some pb blaster and now its as good as new

[@tanksoldier9770]

NICE REVIEWS on that bunch. I would like to try out the WORKPRO SET and the SK set and the Williams set. Well Heck how about all of the sets thanks alot Jeff

[@jefftovani5535]

Some good choices!! thanks tank!!

[@heman85515]

I've bought all the icon wrenches. I love them all especially at 40 percent off

[@craiggoodwin9704]

Jeff, that was an excellent review. You've certainly helped me formulate a list of tools I may be purchasing in 2025 assuming we both survive the Winter. Thanks for Sharing! 🙃🙂

[@jefftovani5535]

Glad I could help you out man!! hope you survive the winter too!! lol

[@chrishale5608]

Awesome like the NO skips of any

[@jefftovani5535]

Yes,i hear ya!! thanks chris!!

[@larryborkstrom3580]

Congratulations on the 10k

[@jefftovani5535]

Thank you larry!!

[@phillipbainbridge9107]

Congrats on 10K Jeff!

[@jefftovani5535]

Thank you phil!!

[@georgeferlazzo7936]

Hello again, Jeff Thank you for another Great Video 👍 Jeff my friend you and your family stay safe and warm up in the great white north 😀 Again thank you 👌 Hey, one of the other commenter mentioned you hit 10k members, I just checked congratulations 🎊 to you.

[@jefftovani5535]

Thank you george,your much appreciated!!

[@tannerwest6823]

I just scored a set of the Icon flex head wrenches today at the pawn shop for 45 bucks. Brand new in the box never opened. Couldn’t believe it. They are definitely good wrenches

[@jefftovani5535]

Wow,you did good tanner!!!!! thank you for sharing!!!

[@JamesBOND-d5g]

Love these videos I'm new here to the channel loving it ❤❤❤

[@jefftovani5535]

Welcome aboard James!!

[@ABobsLife]

Nice set Jeff. Happy New Year

[@jefftovani5535]

Thank you Bob!!

[@cpowerscpo2002]

nice line up jeff great job

[@jefftovani5535]

Thank you CP!!

[@STREETFIGHTER50]

Icon definitely bang for the buck! Thanks Jeff!

[@jefftovani5535]

Yes sir my friend!!

[@Rusty_Daves]

Leaning towards those tektons and I'll atf soak up thanks for the heads up Jeff

[@jefftovani5535]

Thank you Dave for joining in!!

[@christoperspeer2300]

Great video. Great tools.😊❤❤

[@jefftovani5535]

Thank you chris!!

[@chrisgillett1824]

I was also fortunate to acquire the ICON recently at a 40% discount. Thank you for sharing this valuable information, Jeff. PS. Satin or Matte all the way!!

[@jefftovani5535]

You got a great deal chris!!

[@Gutzie]

tekton finish looks awesome

[@brandonm6052]

Wish my regular combos were like this.

[@jefftovani5535]

Sure does!!

[@robhudson5498]

Thank you and congrats. The work pro looks awesome. But I would probably get the tekton.

[@jefftovani5535]

Good choice rob!!

[@sirkdopsah1081]

10,000K 🎉🎉🎉🎉🎉🎉🎉💥💥💥💥💪

[@jefftovani5535]

Thank you my friend,much appreciated!!

[@TomF1-25]

I got the Halfords Advanced set because it is a 8-24mm set with lifetime warranty, I do like the look of the Olsa 6 point set tho

[@jefftovani5535]

Thanks for sharing that tom!!

[@JayBird911]

Thanks, Jeff!

[@jefftovani5535]

Thank you Jay!!

[@Snowmannorth]

Thanks, Jeff! I think I like those Olsa’s and Tekton best.

[@jefftovani5535]

2 good choices my friend!!

[@signtechjoe]

The Tekton wrenches are my favorite. Icon is a close second just a bit pricey.

[@jefftovani5535]

Tekton are nice!!

[@Tad-vd2do]

I bought the duratech set in SAE as I work on a lot of equipment!

[@jefftovani5535]

Thanks for sharing Tad!!

[@jadavison]

The only flex head ratchet set I have both Metric and SAE are the Duratech. I like them but I want a main set. Looks like it’s between your top three. Williams, Olsa, and Icon. I really like the 6 point but being able to service and back off the back drag is super appealing. I may have to wait for that HF 40% coupon.

[@jefftovani5535]

Thanks davison for joining in!!

[@dieselgreg60]

Jeff just purchased 2 Genius ratchets 1/4” and 3/8” off Amazon, I wanted to try the hard handles just because of your recommendation. Thanks Bud keep up the good work

[@jefftovani5535]

Hope you like them!!

[@louisbernstein901]

10,000!!! Woo Hoo !!

[@jefftovani5535]

Thank you louis!!

[@johnmcalisterjr3913]

I have the tekton. And for my trunk tools i have a Amazon brand set metric and sae

[@jefftovani5535]

Thanks john for joining in!!

[@toddhickox4757]

That Tekton set looks sharp!

[@jefftovani5535]

Its nice todd!!

[@tiddums1151]

Enjoyed the video. Thanks, Jeff.

[@jefftovani5535]

Thank you tiddums!!

[@chrismarchese8047]

Olsa… for the 6 points. I was leaning in another direction, but I wasn’t considering a flex head. 🤔 Thanks Jeff! I’ll look into them more!

[@jefftovani5535]

Olsa makes a 6 point non flex as well!! i have them,and love them!!

[@chrismarchese8047]

@ I found them! Now it’s to flex, or not the flex? 😁 Thanks!

[@jefftovani5535]

@@chrismarchese8047 by the non flex first,you'll use them more than the flex heads

[@DaveDoesDonutz]

The best flex head combination wrench set out there is the mac six point precision torque set. Its 72 tooth but its smooth and six point is better.

[@jefftovani5535]

Thanks Dave for joining in and sharing that!!

[@SleepysAutomotive]

Thank you for another great video, Jeff!!

[@jefftovani5535]

Thank you sleepy!!

[@sKid-ts7hr]

I just subscribed. You are great my brother .

[@jefftovani5535]

Thank you my friend,welcome aboard!!

[@rawbacon]

Just 2 more days and 💜Matco💜 is Mine. 🐮🔔

[@jefftovani5535]

Yes sir!!!!!

[@salvatore6539]

Those icon wrenches are pretty sweet. Harbor freight really capitalized on the fall of sears. I think COVID killed our chances of USA made Craftsman.

[@jefftovani5535]

Some guys agree,HF is the new sears!!

[@bigalo014]

Will you be doing a review of the newest Tekton double box end wrenches? (Fixed offset one end and flex ratcheting the other end)

[@jefftovani5535]

Yes!!

[@indyhesterful]

What tools do you keep in your vehicle (video idea)?

[@jefftovani5535]

Thank you for the great suggestion!!

[@jannear8641]

Congratulations on 10,000. Do you know of anybody that makes 6 point long combination wrenches? A guy at work is looking for a set but can't find any.

[@jefftovani5535]

no,but i keep looking!!

[@jannear8641]

@ Thank you.

[@mandapalque]

I was impressed with OLSA tools ratcheting wrenches test that PROJECT FARM did.

[@jefftovani5535]

Yea they did good!!

[@dillontaylor3460]

Do you think those williams are the same ones as blue point? Boy they look identical.

[@jefftovani5535]

I think they are the same,or at least damn close,i dont have any blue point to compare them though!!

[@stevenmaines9114]

Do u no any thing bout steelvision ??

[@jefftovani5535]

Yes,thier are tech tip videos,and repair videos,look back!!

[@stevenmaines9114]

I mean the tool brand lol

[@donwendling7800]

Jeff, How does the Olsa Compare to the Icon....Which is better?

[@jefftovani5535]

I like them alot!! i dont use flex heads as much as non flex ratheting wrench but,its all about options!!

[@s.kirkpatrick8564]

Have yoʻu ever used like a set of Armstrong maxx x beam wrenches? Or anything like them.

[@jefftovani5535]

Not yet my friend!!

[@RonaldS-h3s]

Great!

[@jefftovani5535]

Thank Ron!!

[@inidaho6740]

Jeff, us guys that work 7 days a week, are we weekend warriors or week warrior's ? I have a few complete sets of William's, great tools! Thank you!!

[@jefftovani5535]

Your the true definition of a all week warrior,lol!! thanks my friend!!

[@ronnovak1604]

where were these affordable options 30-40 years ago when we were building our tool sets.

[@jefftovani5535]

Boy ron,i hear ya!!

[@brenthann2623]

great video Jeff. I think anyone would appreciate your opinion.

[@jefftovani5535]

Thank you brent,much appreciated!!

[@Callelle6251]

Only ones I would even consider is the last ones (Williams, Icon, Tekton, even Olsa). Even for DIY, that's the minimum of what I'd consider passable. SK and Duratrash are the exact same. I wouldn't doubt if the pro-stormer, workpro, and Jaeger all come from the same manufacturer.

[@jefftovani5535]

Thank you for joining in and sharing your opinion!!

[@mlieser1230]

I think I would go with the ICON wrenches as they can be easily exchanged as I have a Harbor Freight in the neighboring town. The downside is that I have to don my fire suit and strap on my Bell Mag 4 helmet because of the idiots on the road in that town. 🤣🤣

[@jefftovani5535]

I hear ya,you made me laugh lieser,you can be funny,i love it!!

[@JeffBevilaque]

Hi Jeff We love tools

[@jefftovani5535]

We sure do Jeff!!

[@alcerz984]

Are those sk made in china?

[@jefftovani5535]

China!!

[@markfree5248]

Nice

[@jefftovani5535]

Hello mark!!

[@joeschmitz2790]

My pick is the Craftsman V Series. Lol.

[@jefftovani5535]

Nothing wrong with those!!

[@stephendavis7812]

I have Icon non-flex ratcheting wrenches, and some other Icon wrenches...but in general I like Capri wrenches better. Shopping on line one day I found a set of Milwaukee Flexing ratcheting wrenches, both metric and SAE on sale for 50% off at Home Depot a couple of years ago, maybe a year ago. I wasn't looking for a set, but the price was so good I couldn't pass them up. I don't much like Milwaukee hand tools, they are heavy and many times awkward in your hands... and always overpriced... but these are nice and have the anti-slip in the open end (Ha...not sure where else it would be). Anyway, they are a nice set of wrenches, a little on the short side for my personal tastes but over all a nice set of wrenches. They have an I beam style handle. I think I paid about $170 maybe $180 for the 30-piece set. I haven't used them all that much, but I like them enough that it sticks in my mind as a really great deal.

[@jefftovani5535]

Thanks stephen for joining in!!

[@Rudimentary007]

Tools are 😎 cool.👍🇺🇸🧰