Flip-Top Tool Stand with integrated cable management | Mobile Workstation

  Рет қаралды 352,636

Bau-Woodworks

Bau-Woodworks

Күн бұрын

Пікірлер: 262
@BauWoodworks
@BauWoodworks 3 жыл бұрын
➤PLANS for the tool stand: bit.ly/flip-top-tool-stand-plans
@latishaashford8662
@latishaashford8662 Жыл бұрын
This press has worked like a charm for my projects kzbin.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
@ninagrace152
@ninagrace152 2 жыл бұрын
Well, that’s the cutest supervisor I’ve seen in the industry so far 👀
@BauWoodworks
@BauWoodworks 2 жыл бұрын
For sure!
@KG-du2le
@KG-du2le 2 жыл бұрын
Love the Quality Manager assistance. I always love when my kiddos help!
@justretired6879
@justretired6879 Жыл бұрын
The little worker is better than most!
@salvatoresalvio204
@salvatoresalvio204 3 жыл бұрын
BELLISSIMO VIDEO. OTTIME LE REALIZZAZUIONI. COMPLIMENTI. SALUTI SALVIO
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Grazie! Saluti indietro
@christianlepape6315
@christianlepape6315 3 жыл бұрын
SUPER tout à porter de mains bon travail Merci
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Merci beaucoup! 😄
@talegunner115
@talegunner115 4 жыл бұрын
Love your assistant. You are a very lucky man.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Hehe yes she is gorgeous! 😍
@jeffwilder7117
@jeffwilder7117 2 жыл бұрын
Nice job! I liked the locking pins! Very nice. I especially liked the use of your grandpa’s bolts to anchor down. We must remember our past
@BauWoodworks
@BauWoodworks Жыл бұрын
Hey Jeff, yeah, I was super thrilled when I found the pins. They were the last missing piece to this build. As for the bolts I was a bit concerned if they are strong enough since they have to support the drill press upside down. But they are :) Even when I should get rid of the drill press in the future I will keep the bolts atleast ;)
@robertmceuen3630
@robertmceuen3630 6 күн бұрын
You are an outstanding craftsman, and looks like your machinery is top notch. Beautiful flip cabinet. What country are you in? Thank you for a great video.
@harryfab9659
@harryfab9659 2 жыл бұрын
Very nice piece of workshop furniture. Looks the part and seems to function well. Well designed and thought out. Congratulations.
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Thanks Harry!
@ssgveight
@ssgveight 2 жыл бұрын
This is a beautiful build. Definitely gave me some great ideas for my own build in the near future.
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Awesome, thanks! Let me know how yours turns out!
@terencegillespie6675
@terencegillespie6675 4 жыл бұрын
WOW!! Nothing like having a shop full of second hand junky tools. A really wow cabinet configuration. And of course your daughter will LOVE inheriting it all.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Terence 🤗 But she will have to split it with her sister 😉
@mikenorris4966
@mikenorris4966 4 жыл бұрын
Wow!! Nothing like being an a s s ....unlike you, he is doing something constructive.
@terencegillespie6675
@terencegillespie6675 4 жыл бұрын
For gods sakes! Someone give Mike Norris a pill and help him learn to read. We are all doing something Mike. I have several vids, too. The point Mike was to tease the man about his fabulous and super expensive shop equipment. Is that hard to understand. He liked my comment.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
All good, I got your humor 😉
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Mike for stepping up! I viewed Terence comment as a little friendly tease 😉
@karlgabel9822
@karlgabel9822 4 жыл бұрын
Excellent! The built-in storage is pure genius - so many flip top stand designs lack this essential feature. And a bonus third workstation - WOW!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
thanks Karl 😊 took me a couple of hours to get the final design 😉 I am pretty happy with it now 😁
@tonywest394
@tonywest394 4 жыл бұрын
Very nice video. Concise and too the point but not too vague.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks for your feedback 😁
@comsigninc
@comsigninc Жыл бұрын
Nice design and presentation. I’ve subscribed and I’m binge watching. 😊I so admire your fluency with English. Best Wishes from Canada.
@SJG-96
@SJG-96 2 жыл бұрын
Fantastic workmanship.
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Thanks Serge 🤗🤗
@tworiversworkshop6111
@tworiversworkshop6111 4 жыл бұрын
Very good video. Thank you. I used to cut down full sheets of ply as you were doing on the table saw with many of the same problems, then I bought a Festool track saw on recommendation from another wood worker and now cutting down sheet goods is easy and IMHO much safer than using the table saw.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks. Yeah that's what I've switched to in the meantime, too 😉👍 The first few cuts with the Festool track saw to make the sheets manageable and then the repetitive cuts on the sliding table saw. Super fast effecient 😍 Love it 😁
@JorgeGarcia-kb8ie
@JorgeGarcia-kb8ie 4 жыл бұрын
la verdad me encanto la primera vez q veo un banco asi vasculante sos un genio.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Muchas gracias Jorge!
4 жыл бұрын
Hello my friend. This is a pretty good idea, and it's great. Useful and practical for narrow spaces. I can do it for a few of my tools. Thank you for the introduction and information. See you. Big greetings. stay healthy and happy...
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you! 😄 Let me know how your cart turns out, if you build it! Stay healthy too and greetings from Berlin, Germany
4 жыл бұрын
@@BauWoodworks Ja, du wirst wissen, wann ich es tue. Bleib gesund und sicher. Wir sehen uns. Schöne Grüße.
@chrisgallagher3757
@chrisgallagher3757 4 жыл бұрын
Spring index pins are awesome!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Ohhh yeah 😎
@diywoodworking7490
@diywoodworking7490 3 жыл бұрын
Good work, I made mobile liftable workbench with DEWALT DW745 and DW735 today!
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Thanks mate! That thing looks pretty neat! 👍
@loupanella9632
@loupanella9632 3 жыл бұрын
🤩 wish I have seen this first before I built my flip table 😩 Wonderful design!!
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Never too late to build a new one 😉 Thanks
@loupanella9632
@loupanella9632 3 жыл бұрын
@@BauWoodworks I am planning too!! 😁
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Awesome! Let me know how it turns out 👍
@seanwhitaker975
@seanwhitaker975 Жыл бұрын
This is so awesome!!!
@BauWoodworks
@BauWoodworks Жыл бұрын
Thx Sean 🤗
@davehernandez4177
@davehernandez4177 2 жыл бұрын
Great job my man
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Thanks Dave!
@massimobianchi4262
@massimobianchi4262 4 жыл бұрын
Massimo from Italy . Very good job ! Nice !
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Grazie Massimo 🤗🤗
@lorenmeyer5290
@lorenmeyer5290 4 жыл бұрын
Very very nice build!! Thanks!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Well thank you 🤗
@restholzjunkie
@restholzjunkie 3 жыл бұрын
Bis auf die Verkabelung ohne Aderendhülsen top. Schön gebaut und passt... Über die Elektrik würde ich nochmal schauen...
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Hallo Rainer, danke für deinen Kommentar! Ja das mit der Elektrik habe ich im Video auch bewusst kurz gehalten, da ich da nicht so bewandert bin wie mit Holz. Danke für den Tipp mit den Aderendhülsen. Die werde ich dann bei Gelegenheit noch hinzufügen.
@qtran999
@qtran999 4 жыл бұрын
Clear instructions, good video. Love it. Thanks for sharing.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you! That make me happy to hear! 😍
@ЕгорБажин-к5ь
@ЕгорБажин-к5ь 4 жыл бұрын
Отличная идея. Мастер молодец. Привет из России.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Большое спасибо. С наилучшими пожеланиями из Берлина (Google translate)
@Delboyu2525
@Delboyu2525 Жыл бұрын
A very good project and i have purchased plans. A cutting list would have been very useful also the electrical fittings instruction.
@barstad-9591
@barstad-9591 Жыл бұрын
Great ideas and video. Thanks.
@fdifenza78
@fdifenza78 4 жыл бұрын
Really great project!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Fabio!
@hswing11
@hswing11 2 жыл бұрын
VERY VERY INFORMATIVE
@BauWoodworks
@BauWoodworks 2 жыл бұрын
That is awesome to read! Thank you!
@saschavolling7808
@saschavolling7808 23 күн бұрын
Great Job
@daviOU812
@daviOU812 4 жыл бұрын
Just placed my order and am looking forward to this build!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks for your support 🤗 I hope you have a great time building it and I am looking forward to hearing how your tool cart turns out 😉
@GJ11598
@GJ11598 3 жыл бұрын
Any racking occurring at all? This is an awesome build.
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Yeah it had a bit of a wobble left to right. I added small brackets between the bottom and sides and now it is rock solid. I show in the video of my shop tour if you want to see it ;) Thanks!
@backyard.craftsman
@backyard.craftsman 4 жыл бұрын
That’s very nice thank for the video
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Well, thank you ☺
@valveman12
@valveman12 4 жыл бұрын
Bau-Woodworks Great build! Man, you have a beautiful shop!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks mate! I love my shop! Sometimes before I go to bed I sneak in the basement and turn on the lights in the shop. Just to have quick look at it 😅
@valveman12
@valveman12 4 жыл бұрын
@@BauWoodworks 👍
@stephenyandell7240
@stephenyandell7240 4 жыл бұрын
Great build! Thank you for the video!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Well thank you for watching 😉🤗🤗
@teomman
@teomman 4 жыл бұрын
One of the best stand I’ve ever seen ,keep up the good work man. Also that card trick was awesome.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Teoman 🤗 Glad you like it. New videos are already in the making😉
@markiuzzolino
@markiuzzolino 4 жыл бұрын
What kind of table saw is that with a cross cut sled. Very nice.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
It's the Hammer K3 Winner. A european-style sliding table saw! Such a nice machine 😀
@upwoodart
@upwoodart 4 жыл бұрын
sir good work super
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you 🤗
@thecelt4807
@thecelt4807 2 жыл бұрын
great idea
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Thaaanks
@richmahar9830
@richmahar9830 Ай бұрын
How do you know/measure how tall/large of gap you need, for each tool to rotate without bumping? I have a Ridgid R4331 bench top planer and a Delta Cruzer 10" miter saw that I would like to build a flip top cart for. Thanks!
@kevinashby3784
@kevinashby3784 4 жыл бұрын
Very professional
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Kevin 🤗
@ЮрийЛитвин-г3э
@ЮрийЛитвин-г3э 4 жыл бұрын
Отличная работа.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Спасибо (Google translate...)
@dieter893
@dieter893 4 жыл бұрын
Great job, amazing result!!! Regards from Brazil. Dieter
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you Dieter 🤗 Greetings back to Brazil
@longhuang5613
@longhuang5613 3 жыл бұрын
8:47, YES! If u find out the wood patch, it prove the plywood is very good,not the bad board!
@longhuang5613
@longhuang5613 3 жыл бұрын
but! dont forget put them inside >_
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Yeah the plywood is pretty high grade stuff! Technically the patch is on the inside of the cabinet. But since it is open in the middle it is visible. Turning the sheet around wouldn't have changed much, since it is open there, too. It's shop furnituer so I am totally fine with that
@ronaldososa1975
@ronaldososa1975 4 жыл бұрын
muy bueno!!! saludos desde Argentina
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks 🤗 Greetings back to Argentina 👌
@josephyuven3010
@josephyuven3010 4 жыл бұрын
Nice job
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Joseph 🤗🙌
@inkytu7
@inkytu7 3 жыл бұрын
Super job! I am reworking my small shop and need floor space. Excellent build that has given me some guidance. I have a jointer that is 1m long and will put my thickness planer on the flip side. Cool idea with the index pins. Just subscribed. Keep up the videos. Viele Grüße aus Baden Württemberg.
@BauWoodworks
@BauWoodworks 3 жыл бұрын
That sounds awesomen! Let me know how it turns out ;) Thanks for the sub and greeting back to BW from Berlin, Fabian
@andiatbaden9990
@andiatbaden9990 10 ай бұрын
Hello Fabian, i am building a flip top for a miter saw. For securing the table i like to use your indexing pins. Can you please give me a Link to the shop where you bought them? Thank you
@paolovaglia2826
@paolovaglia2826 4 жыл бұрын
Nice jobs. 😀
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks 🤗
@icastellanos
@icastellanos 4 жыл бұрын
Espero exista un heredero para todas esas herramientas, saludos
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Quizás algún día a mis hijas les gustaría continuarlo. (Google translate)
@1144panda
@1144panda Жыл бұрын
Where did you find the spring loaded indexing pins?
@rahulpoddar801
@rahulpoddar801 4 жыл бұрын
Loved so much the project...Awesome ♥️, and loved to watch the building process too. Fantastic 👏
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you so much. Makes me happy to hear 🤗
@jamestruscott7039
@jamestruscott7039 4 жыл бұрын
Love it! I will most likely replace my flip cart with this model. Well thought out.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Awesome! Definitely let me know how it turns out! 😍
@FaniMaker
@FaniMaker 3 жыл бұрын
Awesome!!
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Thaaaaanks 🙌
@saschavolling7808
@saschavolling7808 23 күн бұрын
Schönes Video
@allenhall2259
@allenhall2259 2 жыл бұрын
awesome
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Thanks Allen 🤗
@iq0099
@iq0099 Жыл бұрын
Its wobbling, right?
@SzechuanChickenDog
@SzechuanChickenDog Жыл бұрын
Rip the beech.... Hahahaha. Love it
@knight3131
@knight3131 3 жыл бұрын
Hello, is the pipe stationary when you are flipping the stand or does it rotate along with stand?
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Hi there, The pipe rotates along with the table top since I placed a srew throug the pipe.
@makermarc70
@makermarc70 Жыл бұрын
Cool
@habbekrats123
@habbekrats123 Жыл бұрын
Hi Fabi, Nice Flip-top stand! Looking for those indexing pins, where did you source them from ?
@user-pg6jl7jw7s
@user-pg6jl7jw7s 3 жыл бұрын
Great cart! Where did you find the locking pins that you use on your cart?
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Thanks Jim :) I found them on A.......: www.amazon.de/gp/product/B073S7JMQF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@tamerabo3114
@tamerabo3114 4 жыл бұрын
شعوب احترمها كثيرآ. جهد بشري اقدره
@BauWoodworks
@BauWoodworks 4 жыл бұрын
شكرا جزيلا (Google translate)
@kratingdieng
@kratingdieng 4 жыл бұрын
I think this channel will grow up faster. Glad to be your subscriber. Danke...
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks mate 🤗
@johncarter9067
@johncarter9067 4 жыл бұрын
Good work I just subscribed from Tasmania Australia
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks. That's awesome mate 🤗
@talktorohit54
@talktorohit54 3 жыл бұрын
I want to build a similar one. What size drill press is that? I am wondering if the 12 inch drill press be too high of a tool to have a flip top cart and make it unstable. How is your experience so far while using it?
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Nice! My drill press has a height of about 73cm (28 in). I really like the cart so far. The wobble in the side bothered me after a while and I made 4 triangles that act as brackets between the base plate and the sides. Now it is really rock solid. I will include that upgrade in the article on my website and also put it in the plans soon.
@CBJCarpinter
@CBJCarpinter 3 жыл бұрын
Hello !! Greetings I am interested in the plane and I would like to know how high is the drill press?
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Hi there ☺ My drill press is 73cm high 😉 You can find the plans here: bau-woodworks.com/produkt/flip-top-tool-stand-plans/
@christophmayer4839
@christophmayer4839 4 жыл бұрын
Echt cool💪😁
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Danke dir 😁
@therealeffingdeal
@therealeffingdeal 3 жыл бұрын
At 16:10 to 16:20 I noticed the stand was very unsteady and swayed back and forth as you were clamping and drilling on the side table. How secure is this mobile workstation and what could you done to firm it up?
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Hi there, yeah there is a little bit of a wobble there. I've stiffen it up with 4 triangular brackets. You can see that in my shop tour video. With that it is rock solid!
@user-xn7iz3jz7f
@user-xn7iz3jz7f 4 жыл бұрын
Wonderful work keep going
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you 😊 I will!
@elonf6164
@elonf6164 Жыл бұрын
Did you have to drill out the column to better connect the drill press head to the column? Mine is held on by a set screw, which is fine with gravity assisting. I'm assuming upside down the little set screw isn't going to cut it.
@GeneCaralde119workshop
@GeneCaralde119workshop 4 жыл бұрын
Great build! I would love to build one myself. Greetings from the Philippines!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you! That sounds awesome. Let me know how it went when you've build it! 🤗
@stevezartman7238
@stevezartman7238 2 жыл бұрын
Are plans measurements in Imperial as well as Metric?
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Hey Steve, They are metric only..
@tcbridges
@tcbridges 2 жыл бұрын
Can you tell me what the 4 snap pins are and there size. Cant seem to find them in the US. But love the concept. Thank you
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Hi Thomas, they are from Gantner Norm, which is a provider for standard machine parts. Here is the german Amazon link: amzn.to/3IZUHtT Maybe they also send to the US or have a sales partner in the US.
@mr.ranyhomemade2466
@mr.ranyhomemade2466 4 жыл бұрын
So cold I like your
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks, for whatever you like 😉
@BaronvonBavert
@BaronvonBavert 4 жыл бұрын
Top Daumen hoch !!!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Vielen Dank Harald 🤗🤗
@oficinanasala
@oficinanasala 4 жыл бұрын
Ótimo projeto parabéns já me inscrevi aí parabéns 🇧🇷
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Obrigado (Google Translate)
@ProjectAnubisUSA
@ProjectAnubisUSA 4 жыл бұрын
@14:00 my favorite part of the build!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
I loved that part! It was pretty nostalgic to install these bolts 😍
@klannstyle
@klannstyle 11 ай бұрын
0:12 At this moment (being the first time seeing you and your channel) i had a just a moment of thinking that Jason Momoa had started a youtube woodworking channel ;-))))) In that instance your face do look like him a lot and the muscles are there too, not like his but as i said, it was for just like a few moments. I hope you're not offended that i shared this thought here... now. I literally stopped the video to comment until i forget to do it ;-) Cheers!
@filmart430
@filmart430 4 жыл бұрын
I would build something like this but I don’t have a young lady from quality management that will assist me so I’m going to wait until I get one of those first.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Hehe, well she is absolutely crucial for the success of this project. I hope you get one soon 😉😅
@tdmiller2967
@tdmiller2967 4 жыл бұрын
Great job, will use some of your ideas for mine!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Awesome 😍 let me know how it turns out 👍
@faustoq
@faustoq 4 жыл бұрын
Really great!!!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you so much 🤗🤗
@thierrybeysseriat4495
@thierrybeysseriat4495 4 жыл бұрын
I didn't understand all the english speech but good job and good idea !
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks mate 🤗
@ulrichzache3793
@ulrichzache3793 4 жыл бұрын
Nice project, quality management very professional. Would a counter weight at the bottom plate stabilize the construction against vibration etc.? KR from Germany, subscribed ☺
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Hehe yes the quality management is on point and always challenging me 😉 Yes I think that would help. Although I don't know if that makes moving the cart even harder. The cart is 70-90kg already, plus all the stuff in the drawers... I think about running a threaded rod in the center of the pipe in the flip top that is held in place with nuts and washers at each side. Hence apply pressure to the sides of the cart and make it rack less. But I guess it doesn't bother me enough at the moment to really do something about it 😅 Viele Grüße aus Berlin 😉
@hubertv.g.7664
@hubertv.g.7664 4 жыл бұрын
Topppppp work
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Hubert 😁
@tashapalmer4519
@tashapalmer4519 2 жыл бұрын
Love it thank you. I had wanted to do a flip top for my band saw and drill press but thought they were too high. That looks very sturdy. Please take care of your lungs though. I noticed you weren’t wearing a mask much.
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Hey Tasha, Yeah it indeed works pretty well. Hope you'll build your flip top. And yes you're right I shpuld wear my mask more often. Thanks for the reminder 👍
@hackeett
@hackeett 4 жыл бұрын
The construction is awesome, however due to the nature of the build, does it not wiggle a bit? Id potentially add some suporting mechanisam that can be removed when flipping just to ensure that its somewhat "Wiggle free"?
@rw7532
@rw7532 4 жыл бұрын
I think if some stretchers were installed in the front and back on top of the bottom piece and between the left and right side would help keep it from racking, I saw quite a bit of sway when he was suing the extension wing.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Nino and yes there is a bit of wiggle. It didn't bother me yet. I wouldn't want to add something that makes the flipping operation painful. There are several ways to achieve that though.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
R W yes that would be good method 👍. I thought about adding someting like this, but the bit of wiggle didn't bother me. Another way I thought of is adding a steel wire that runs in the pipes, can be tensioned and applies pressure to the to sides.
@adrea100
@adrea100 3 жыл бұрын
can you please provide me the link for the plans ??
@BauWoodworks
@BauWoodworks 3 жыл бұрын
Here you go 😉 bau-woodworks.com/produkt/flip-top-tool-stand-plans/
@mattpeterson7074
@mattpeterson7074 4 жыл бұрын
Glad I found this! I'm in the process of building my own flip top (for my spindle sander and my planer), and I'm definitely going to use those indexing pins. That's way nicer looking then what I was going to use. Might even using that idea of drawers, although I might not have enough plywood for that. Ha! Great video, sir. Amazing that you only have 296 views!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks Matt! Yes these indexing pins make the flipping operation so fast and fun! Go for them 😉 I think it is worth the extra trip to get another sheet of ply for the drawers. Then you have plenty of storage and it helps to keep the shop clean 😅
@jonruehle9186
@jonruehle9186 4 жыл бұрын
Those ARE some flippin-sweet indexing pegs!
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Absolutely. I am very glad I've found them. Took a few hours of online research to find the right ones with the locking and spring mechanism 😍
@Dave5843-d9m
@Dave5843-d9m 4 жыл бұрын
I'm making a rolling tool cabinet. I'm using these drawer sides for the 100mm drawers with bottom fit runners for the 50mm drawers. They only have two wheels at each side but 40kg load should be more than enough. www.screwfix.com/p/drawer-sides-runners-400mm-2-pack/16005#product_additional_details_container
@johnfithian-franks8276
@johnfithian-franks8276 4 жыл бұрын
I must have missed a detail as I did not see how you stopped the spindle from going round and round, I apologise as it was most definitely my fault but at seventy years old I sometimes have these blanks (don’t worry I no longer drive and my son keeps an eagle eye on me if I am using any tools). It will not be long until I sit in the corner and just make weird noises (oh, hang on I have also been accused of that) but I just conveniently forget about it). It is amazing what you can get away with and blame it on dementia. I enjoy your video and I will type that in before I forget that as well. PS my son tells me I am only sixty nine so I am not as batty as everyone says.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Hi John, thanks for your comment. Seems like nothing can take your humor! I like that 😄 I assume you are talking about the table being held in one of the two positions. At 12:20 I install these spring loaded indexing pins, that go in to the table and can be pulled out to swivel the table around. Oh or are you talking about turning the table endlessly in one direction, which will break the cable running inside? Therefore I did not do anything, but made a note in my mind to not do... But as someone else suggested in the comments a stop on one side would prevent me from doing it. Hope you have wonderful time with your son in the shop! 😀
@TinyBasementWorkshop
@TinyBasementWorkshop 4 жыл бұрын
Great build 😉 I consider rebuilding this myself, because I have such a small workshop - that flip-top solution would come in SO handy!! Btw: solid english 😊👌🏼
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thank you 😊 that flip-top really shines in a small shop. I am very happy to have it around and save a ton of space! Awesome 👍 If you build it, let me know how it turns out 🤗
@H2Dwoat
@H2Dwoat 4 жыл бұрын
Hi, great vid 👍 thanks. What do you estimate the weight of the 2 tools is? Did you choose tools of similar weight?
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks 🤗 The drill press is 15kg and the sander about 30 kg 🐘 so they are not the same 😅
@H2Dwoat
@H2Dwoat 4 жыл бұрын
Bau-Woodworks: Thanks for getting back to me.
@jonruehle9186
@jonruehle9186 4 жыл бұрын
That is a much better pocket screw jig. The tensioning handle is on the BACK! My Kreg is up front and is totally in the way of the dust collection.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
oh yes this one is great. with the habdle and dust collection on the same side, really sounds like a major pain 😅
@kai3542
@kai3542 2 жыл бұрын
I would like to use a similar concept to create a tabletop out of a dual sided door, so that both sides can be displayed. Is there any way to do this without drilling all the way through the door, and just adding extensions to serve as an axle on both sides?
@BauWoodworks
@BauWoodworks 2 жыл бұрын
Hi Kai, yes absolutely. I think if your table is thick enough you can just drill a hole on each side and insert a piece of pipe. Should work ;)
@1SGBob1
@1SGBob1 4 жыл бұрын
I like the indexing pins. I was wondering how the holes in the flip top are fareing? How long is the pin that goes into the top? Do you think it would be prudent to add pieces of tubing similar to the bearing surface for the 3/4" pipe? Thanks for sharing.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Yes they are great. They go about 6mm into the hole. I thought about letting the pin go into a metal tube. I already purchased the tube and decided against it since the hole the rather hard beech wood are suficient 👍
@1SGBob1
@1SGBob1 4 жыл бұрын
@@BauWoodworks Wonderful, Thanks again.
@AtchoumeCompagnie
@AtchoumeCompagnie 4 жыл бұрын
wahou cool ! I have a big dril press and I would like to make a similar stand but I have a question for you. what is the total weight of drill press and sander combination please? Thanks a lot for the answer
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Thanks. The drillpress is around 20-25kg. The sander 30kg. So a total of about 55kg. The height of your drillpress might the limiting factor. My drillpress is 73cm tall. With a bit of clearance I end up with 90cm working heigt. Which is almost a bit too high for me...
@AtchoumeCompagnie
@AtchoumeCompagnie 4 жыл бұрын
@@BauWoodworks my drill press is almost your total weight ... 48kg my drill press ... and 98cm high ... it's a "little" monster ... the flip-top stand is impossible for me. I mounted my drill press yesterday so I discovered its wheelbase at that time. thanks a lot for your answer and your videos.
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Ohh wow that sounds like a real monster 😍🐘
@AtchoumeCompagnie
@AtchoumeCompagnie 4 жыл бұрын
@@BauWoodworks you can watch this video of the assembly of the machine. It's in French sorry. But it's a French machine ^^ and you can imagine its weight ... The head with the engine block is very heavy and the table is made of cast iron so heavy too! kzbin.info/www/bejne/bYq8dpdubtpsndk thanks for your time :)
@BauWoodworks
@BauWoodworks 4 жыл бұрын
Nice machine! 😍
I Made A Double Flip Top Tool Stand For My Drill Press And Band Saw
12:43
Some Skill Studio
Рет қаралды 42 М.
Flip Top Tool Stand with NEW Features | DIY Shop Storage
13:07
Fix This Build That
Рет қаралды 612 М.
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26
Я сделала самое маленькое в мире мороженое!
00:43
How Strong is Tin Foil? 💪
00:25
Brianna
Рет қаралды 46 МЛН
Бенчик, пора купаться! 🛁 #бенчик #арти #симбочка
00:34
Симбочка Пимпочка
Рет қаралды 4,1 МЛН
Best Workbench for Tiny Workshops
17:22
Polkilo
Рет қаралды 284 М.
Drill Press Table with 7 Truly Useful Upgrades
33:51
GET HANDS DIRTY
Рет қаралды 576 М.
Don't Build a Flip Top Tool Stand, THIS Tool Storage Is Better
14:56
Full Steam Designs
Рет қаралды 337 М.
How to make a Flip Top Tool Stand // DIY Woodworking Project
9:52
Johnny Tromboukis Woodworks
Рет қаралды 577 М.
The Woodpecker Ep 109 - Flipping tools carts
17:54
L'gosseux d'bois - The Woodpecker
Рет қаралды 223 М.
Flip Cart, Part One. FREE PLANS | How To
18:10
WhosTheVoss
Рет қаралды 84 М.
TOP100 Woodworking Tools Hacks | Woodworking Ideas
1:39:21
YASUHIRO TV
Рет қаралды 3,2 МЛН
Heavy Duty Flip Top Tool Stand
43:09
Jamie's Random Hobbies
Рет қаралды 22 М.
84 - How to Build a Flip Top Tool Cart - Double your Shop Space & Storage
34:31
Kings Fine Woodworking
Рет қаралды 458 М.
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26