No video
Flipper 60 Build Log - 60" Pitcheron with Waggle Brake and Sleeveron
Рет қаралды 3,762
Күн бұрынBuild log for 60" Flipper Pitcheron - 3D Printed, 60" Twisty Wing Glider with Waggle Air Brake and Sleeveron. Now with interlocking nosecone and canopy ....
Build log - www.rcgroups.c...
Affiliate link:
Bambu Lab Printer and Filament: shrsl.com/2i5eg...
@ac808 Ай бұрын
Looking forward to the maiden videos!
@jakeclauson9863 Ай бұрын
How did the brakes work out? I'm guessing the theory is it'll cause more drag? Looks like a nice build. Interested to see it in action
@geode_rc Ай бұрын
Waiting for re-maiden … stay tuned
@johannesgoetzen Ай бұрын
Isn't that bad for the servos?
@geode_rc Ай бұрын
@@johannesgoetzen Only if you operate outside the servo spec limit
@geoffreygower4911 Ай бұрын
All up flying weight ??
@geode_rc Ай бұрын
@@geoffreygower4911 1000g auw with 1 wall, 5% infill using PLA Pro
@geoffreygower4911 Ай бұрын
@@geode_rc good weight and need a bit more ballast when on a windy slope. Built a similar balsa/fiber glass swivel wing back in the early 90s and it flew great. All guess work then. Look forward to seeing the video. Cheers from OZ
Valkyrie Workshop
Рет қаралды 7 М.
Robinson Foundry
Рет қаралды 1,1 МЛН
Matt Spears
Рет қаралды 1,3 МЛН