Flipper Zero Firmware v1.0 Is FINALLY Out! What you NEED to know!!

I've been waiting for version 1.0 of the Official Flipper Zero firmware for what seems like FOREVER! Well, this week it FINALLY dropped and I've been getting a TON of questions about it! Well, in this video, I break down EVERYTHING you need to know about Flipper Zero Firmware 1.0!!
Want to make your own project? PCBWay can help! They can work with you every step of the way, from PCB design, printing and assembly, as well as 3D printing, CNC and more!! Check them out at www.pcbway.com/
Derek Jamison's Channel : / @mrderekjamison
RocketGod's Channel : / @lordrocketgod
-----------------------------------
Check Out The Official Squachtopia Hangout Discord Server!:
/ discord
-----------------------------------
Support the Channel at my Patreon!!
www.patreon.co...
-----------------------------------
Save 40% off at CodeCrafters! : app.codecrafte...
-----------------------------------
Follow me on Social Media!
TikTok : / talkingsasquach
Instagram : / talking_sasquach
-----------------------------------
Email [e-mail] for Partnership/Sponsorship Inquiries

[@prodbyswix]

I haven’t used my flipper in a while and i kinda miss using it. i’m going to download 1.0 to see if flipper has gotten better. thanks sasquatch

[@TalkingSasquach]

That's a great idea!

[@prodbyswix]

i just realized i spelled his name wrong. i meant to say “sasquach”

[@midship904]

Same here 😄😅

[@MrDerekJamison]

Thanks for the shout-out at 4:34 for my channel! My video next week is about the 7:20 Walkie Talkies as well (but using the 22-Channel kids walkie talkies) and sound just about as awesome. 🤣🤣🔥🔥

[@TalkingSasquach]

Oh yah, that little Piezo sounds super rough

[@jmr]

Any way we can get that down to around 162.5? That's where NOAA Weather radio is. The frequency is slightly different depending on your area. It's below the Flippers intended range so I would expect poor performance but maybe it would be usable for people in a strong signal area.

[@MrDerekJamison]

@@jmr I think that's about 1/2 the lowest frequency supported. CC1101 is doing some crazy stuff to even listen to the signal, so I don't think it's likely (at least not from me).

[@jmr]

@@MrDerekJamison Yes, it's supposed to go down to about 300. I know people have gone outside that range but filters reduce efficiency and the signal needs to be stronger.

[@RaffaelN]

Thanks to Talking Sasquach's shoutout, you got a new Subscriber, Mr Derek!

[@iyeetsecurity922]

Can it fix the McFlurry machines now?!

[@b4uc2far95]

😂 we can only hope. 🤞

[@dohnutz.]

Do you personally find it more beneficial to download 1.0 if you are running Momentum or would you just wait until the Momentum devs leverage the new update?

[@YakovFn]

If you update to latest dev update on Momentum, yoi already have it

[@dohnutz.]

@@YakovFn sick thanks!

[@StonedAlone]

was wondering this too. I'll prolly just stick to Momentum and keep it updated on there

[@2smg]

Yay!

[@TalkingSasquach]

Indeed!!

[@Mojo_DK]

I am new to those little hacking devices. Would you recommend getting the flipper zero. Or should I get the Cardputer? Are there even more interesting alternatives? What is most versatile and fun to play with? What allows for the best "party tricks"?

[@the-puppet1876]

New momentum users were licking at the walls for "Flipper Walkie Talkie"... ...It was already a feature

[@Mr.Ħouse]

Walki talki 1.0 weeen?

[@lrgcoolest9770]

How would I use the PA system with my Flipper zero at stores

[@baller-qw9bb]

where do you get that screen for the flipper

[@dennisfink1591]

Will all those new features be incorporated into the momentum firmware updates as well?

[@TalkingSasquach]

They already are!

[@dennisfink1591]

@@TalkingSasquach thank you 🙏🏻🙏🏻🙏🏻

[@Cofoster]

I downloaded the extreme firmware when my Wi-Fi board is connected every time I go to sub gigahertz it crashes what do I do?

[@moormoor4281]

Now it's stable things will improve even more I think 💭😸

[@MrDerekJamison]

No longer beta!

[@TalkingSasquach]

It's not!!!

[@jpschwenke]

Anyone having an issue with Marauder deauth attack? I used to be able to deauth my own 2.4ghz network and know its not work like it did. I've tried Flippers new v1.0 firmware, Unleashed, and Momentum. I have the Flipper Wifi dev board, and the Rek5lab triple board that I've re-flashed Marauder and nothing seems to work. I can run a scan and see a list of APs. I can rickroll so I know both the dev board and triple module are working. Any help would be awesome. (Also wifi security is WPA-2 and changing it to WPA-1 does nothing)

[@JannievanderWalt]

So this is where I am confused, so you have both the Original and the Momentum Firmware? Or do you flash Original to upgrade it and then reflash Momentum? I was thinking maybe the Momentum Firmware would eventually get all these features. Struggling to figure out which way to go. Love the vids by the way! 🙏🙏🙏🙏

[@laory1808]

Upgrade official firmware, then flash whatever custom firmware you use. You can also put your cfw on SD card and boot to it from the SD directly on the flipper. The latter option gives you freedom to use both firmware interchangeably without having to refresh anything. Have fun out there. 👾☠️

[@JannievanderWalt]

@@laory1808 gotcha thanks so much!

[@kyungi1]

@@laory1808 So flashing the new 1.0 firmware then flashing a custom firmware keeps all the 1.0 updates?

[@laory1808]

@@kyungi1 yes - if you flash 1.0 and then flash to cfw, your base build will be updated.

[@WillyJL]

@@laory1808 no. absolutely not. completely wrong. switching firmware removes EVERYTHING from the previous firmware you had installed. installing official and then installing momentum is equivalent to only installing momentum.

[@frickinbill]

You forgot to put that cool PCBWay mic topper on!!

[@DeckUser1]

Any updates on the m1 monestack?

[@Junior-ik1gg]

They just keep blowing us off on kickstarter. A lot of unhappy backers. They are full of excuses.

[@LzyPnda]

how do i get my flipper layout to look like yours with the side scrolling?

[@TalkingSasquach]

Momentum Custom Firmware

[@LzyPnda]

@TalkingSasquach thxs!

[@Em.P14]

is the unleashed version out yet?

[@JoeLol-c9d]

I was so excited for firmware 1.0

[@TalkingSasquach]

Me too!!

[@moslimislam5714]

There is custom firmware available for that Quansheng radio you used. You can use it to jam radio signals. I'm not sure but I think you can use it together with the flipper0 to do a rolljam attack on cars

[@honestlocksmith5428]

It's not necessary to try and jam the receiver from receiving any valid codes when recording a rolling code signal for a replay attack. The captured signal will be valid again after the receiver cycles through a few codes by normal use.

[@moslimislam5714]

@@honestlocksmith5428 If I understand you correctly then opening a car with the captured code becomes Russian roulette. I dont know where you get your info, but by the time the same code cycles back to that one code you captured gta 6 has already been released. It is ABSOLUTELY necessary to jam at the same time.

[@honestlocksmith5428]

@moslimislam5714 it's a rolling code, so a captured code becomes a valid code from the entire pool of 65k codes. This occurs within a few uses.

[@moslimislam5714]

@@honestlocksmith5428 nooo bro each code is unique and there are MILLIONS of codes ones a code is used it’s over. It’s not a pool of codes. It’s an algorithm that generates codes.

[@moslimislam5714]

@@honestlocksmith5428 what’s the point of having a pool of codes that all work at the same time? Where is the “rolling” in “rolling codes”. Might as well use one code then??? 😂 It’s not a pool of codes. It’s an algorithm that can generate millions of unique codes. Ones it’s used it’s over.

[@RaffaelN]

I have recently got my FlipperZero and thanks to KZbin Algorithm I found the AWESOME YOU! I have been patiently waiting for you to talk about the Firmware v1.0 update. Woke up today and TaaaDaaa!! Thank you so much, Talking Sasquach. Your content and everything you cover are TOP NOTCH!! Seriously the best KZbin channel that covers everything FZ. Cannot thank you enough. I have a question as a total noob to the world of Flipper, would you recommend me updating the Firmware to v1.0 or updating it to Momentum straight away?

[@TalkingSasquach]

Yes, I always recommend updating your Flipper to the latest Official Firmware, then installing Custom Firmware. Sorry for the randomly capitalized words lol

[@RaffaelN]

@@TalkingSasquach LOL no worries. Thank you for the reply and advice. I have watched your most recent Master the Flipper Zero: Beginner’s Guide. You are going in detail about creating the update file and put on as many as Customers Firmwares. Great video too by the way! Thanks again 🙏🏼

[@OliverMappin]

With all these updates and stuff and jumping between Xtreme and rougemaster my flipper has got a tad bit overrun it won't even display animations anymore even after fully updating and stuff. You should do a video on how to clean the flipper back to pretty much stock without losing all saved signals and stuff

[@TalkingSasquach]

You can just delete your Apps folder, then update to whatever firmware you like

[@OliverMappin]

@@TalkingSasquach Oh sweet I'll have a try of this soon then hopefully it cleans it up a tad appreciate it man didn't think about that 😂

[@Atmatan]

​@@TalkingSasquachApps folder, and apps data folder, and dolphin folder if you added animations, and if you have a lot of sub files (especially large raws) that can slow your SD.

[@lorenzo9676]

What’s your knowledge on ps5 controllers I have mines updated but I like to use it Bluetooth I understand wired connection is safer is their anything I can do to protect myself better also was thinking of upgrading my modem /router one that can do WiFi 6 …will that be necessary to get especially if I have kids that like to hack or act like there hackers with their flipper zero

[@SomewhatFringe]

Would rabbit labs gpio stuff work on the original firmware now?

[@TalkingSasquach]

Yeah, everything from RL will work on Official firmware

[@SomewhatFringe]

@@TalkingSasquach sweet!!!!

[@moormoor4281]

Excellent explanation

[@TalkingSasquach]

Thank you!!

[@GenuineArticle71]

i've been using flipper-Xtreme. If i go back to using Flipper zero software with new firmware will i loose existing info stored on the microSD card and the ability to use wifi tools like EvilPortal and Marauder?

[@TalkingSasquach]

Just update to the latest version of Momentum and you're golden.

[@parkerazz4385]

I'm here. With the new update had new levels for Kashi

[@TalkingSasquach]

Very cool!!

[@YellowPurple]

❤❤❤

[@SecretBunker-e1n]

The walkie talkie part made me laugh

[@Shadow1stt]

What walkie do you use?

[@TalkingSasquach]

QUANSHENG K6

[@frankiecal3186]

We're Pure CHAD Alpha now.

[@TalkingSasquach]

It was bound to happen

[@ChasParker-w6r]

Thank you!

[@TalkingSasquach]

You're very welcome!

[@stillcantilex7040]

Is anyone else having issues with the frequency analyzer using the cc111cc

[@PhilieBlunt666]

U just reminded me of my favorite post ever. "you can win any argument by just saying shut up nerd!" Someone replied "no you can't" Op "SHUT UP NERD!"😂😂😂😂

[@Atmatan]

If you call looking like a child 'winning', sure 😂

[@Squeek]

what is that electric lamp thing to the left of ur screen!!!

[@BrianAHarkins]

I was hoping you would make a video on the new firmware. Thanks! 🙏

[@TalkingSasquach]

Wish I could have done it sooner!

[@johan2sr]

I love the update especially downloading apps option.

[@ReginaldSmart-o7u]

How do I get the flipper zero

[@zhovner]

Thanks

[@tech53tjw77]

Great news!!!

[@moormoor4281]

Tidy product fantastic

[@BelicTransporter]

Talking Sasquach is No longer Olympics

[@jmr]

The Sasqwadolphin picture is horrendous! I don't want to meet that thing in a dark alley/river. 😂

[@TalkingSasquach]

I spent a long time getting AI to generate that image!

[@jmr]

@@TalkingSasquach Good job. Now let's pray it never actually walks the earth unless it's the SyFy movie of the week. I would watch the movie though.

[@ibeclownin83]

I can't get Qflipper to work on my laptop curses!!!

[@JosephRenna-e4f]

Hey sqautch can u help me with the Walkie talkie in won’t work and the sound is just coming out fuzzy I’m 12 and a fellow flipper user

[@Dodz350]

Thank you so much bro

[@bezeel21]

But the hardware hasn't changed ?

[@TalkingSasquach]

Nope!

[@memecentral5469]

Dont ever say sigma rizz please.

[@TalkingSasquach]

100%

[@memecentral5469]

agree

[@4acae86]

Flipper has changed a lot since I put mine in a drawer and forgot about it. 😂 maybe I’ll dust it off

[@tripsyhill7768]

Now I can be marcus in watchdogs 2

[@charlesurrea1451]

Alright, so from the get go I'm going to call BS on this. I did the firmware upgrade and it wiped all my goodies away. So now I have to go back in put it all my goodies You know things like a working frequency analyzer Rolling code all that other fun stuff

[@greglangley4518]

Hello @charlesurrea1451, I am experiencing similar issues, including numerous errors and restarts. I was forced to reformat the SD card, install Momentum 7, and spend a significant amount of time searching through backup files and browsing GitHub to restore my system with the previous files. At least the flipper app had a lot of the saved ir and sub ghz files. It's working great now and has the new features with the exception of my Cyber Brothers Mayhem boards, esp 32 radio, which isn't working. The c1101 works when plugged into the same socket, and the factory dev board works great with Mayhem, so I think it's the extra esp32 radio that has failed.

[@smevy_main]

I was in the Q&A and I am pretty sure they mentioned 1.1 being way cooler than 1.0, "Oh you are exited for 1.0!? Just wait until you see 1.1"

[@TalkingSasquach]

Yes, the 1.01 update has actual content, I just wanted to explain the whole 1.0 thing!

[@VoltronLion]

I was just thinking about my flipper the other day

[@cruzmedina3932]

Do you think the world with flipper zero is slowly becoming Watch Dogs 2?

[@BerniesBastelBude]

interesting - i should try more stuff with my FZ!

[@sniperking1990]

so, do we all have the same radio? lol

[@TalkingSasquach]

Yah, I bet we do! That Quansheng radio is really good for the price

[@sniperking1990]

@@TalkingSasquach the real question is what firmware are you running?

[@frankiecal3186]

Is their a way to put chat gpt ai on the flippy?

[@moormoor4281]

Yes new 🆕 firmware

[@TalkingSasquach]

I was excited too!!

[@SahNazim]

8:22 actually this is scary 😧

[@mejesster]

That thumbnail is horrifying

[@zR_CrackiiN]

Nice flooper;)

[@618sk8]

Maybe 1st 😅 idk

[@Jacob_WasTaken]

same day as satisfactory

[@618sk8]

2nd ? 😂

[@TalkingSasquach]

Solid second!

[@AYEItzErik06]

I saw a message from an admin in the Flipper Discord server and they said it was more of a marketing thing

[@WillyJL]

it is. 1.0 does not bring really any new major features. it is a milestone, and the blog post recaps the last 3 years of development. but everything they listed has been available for months or even years. it is just they think now its "stable", and wanted to get people hyped for it and making this blog post with little explanation as to how things actually are is good for marketing, as this comment section percetly demonstrates.

[@moormoor4281]

433.92 cool 🆒 as I'm a radio amateur useful fun

[@TalkingSasquach]

Sounds like crap but it's fun to play with!

[@paranoidzkitszo]

@@TalkingSasquach ...kikky.....(‘?)

[@napst3r1]

Battery from 1 week to 1 month 👽😎

[@zeDoSauRus]

lots of talking and you didn't exactly explain do we need to update or not as Momentum users (or similar)

[@TalkingSasquach]

@@zeDoSauRus momentum already has everything from this update

[@zeDoSauRus]

@@TalkingSasquach thank you for the info! Would be perfect if it was in the video :)

[@TalkingSasquach]

@@zeDoSauRus it kind of is but I guess I wasn't being clear enough about that, my bad!

[@zeDoSauRus]

@@TalkingSasquach no worries❤️

[@mrw1160]

The thumbnail disturbs me...

[@TalkingSasquach]

My work here is done

[@ExtravagantEthan]

Minecraft is taking notes

[@mattcurcic5585]

its a little disappointing honestly, expected at least one new big feature but i guess they have slowed down since almost being banned . i love my flipper but lately its constantly having issues when i want to get pcaps etc.

[@Reaper_98996]

new firmwareeeeeeeeeeeeeeeeeeeee :D

[@Chinw3]

That take so long wow 😂

[@nickwaah2702]

Great Rick rolling

[@moormoor4281]

English England love 💕 u

[@TylerHodges1988]

Comment

[@AppleScabs]

Comment

[@TalkingSasquach]

Coment

[@victortorres1585]

It went from commie beta to capitalist alpha

[@jesshervin7180]

First

[@TalkingSasquach]

hell yeah! nailed it!!

[@jesshervin7180]

​@@TalkingSasquachI'll never fail again

[@barcidstudios]

Flipper is getting too mainstream. It used to be cool because it was edgy but now every teenager has one.

[@paranoidzkitszo]

Yo! Iz da T aco Sasko. T aco Sasko. in da houzze!!

[@machine-code]

M O M E N T U M