I will make the bottle jack work upside down to use on my homemade shop press
Пікірлер: 113
@pinocolada42547 ай бұрын
Thanks for this easy torturial. I've just flipped my 30 ton jack in maybe an hour, including welding the new plug etc. Way beter for a press than to use all those clumsy return springs etc when using an bottle jack in its original setup.
@TheHomecrafter19887 ай бұрын
Nice work brother and thanks
@michaelbyron1166 Жыл бұрын
I love the way you think outside the box to overcome the challenges of not having the exact tools.
@olevo33322 жыл бұрын
I love the creativity involved here. Instead of having machines perfect for every type of machining problem, you use standard tools that everybody has to solve problems. This is on the other scale of all the high-gloss high-class stuff you see around youtube where people seem to want to show off all their tools. Well done and thank you for taking the time to document the process!
@TheHomecrafter19882 жыл бұрын
Thanks for your kind and motivating words
@MASS18667 ай бұрын
Agreed. I get a kick out the “DIY” guy who are all like well first we’re go over to the lathe that everyone has in their back pocket , the well go over to the CNC…. This gentleman is real. At least. I make my own stuff all of the time and still learned a couple things.
@scroungasworkshop4663 Жыл бұрын
Hi Home Crafter, there is a company in Australia that sells hydraulic presses with an up side down jack that they modify themselves. They also change the small pump around so that the pump works on the down stroke not the up stroke like yours. The seals at the top of the ram and the top of the pump need to be in good condition as normally the oil flows down away from them and so don’t leak much but when you turn the jack up side down they are immersed in oil all the time so they can leak. I have had to replace the seals in mine but it’s an easy job. Excellent video and I love your creative solutions to problems. Cheers Stuart 🇦🇺
@TheHomecrafter1988 Жыл бұрын
Good day brother .that is better then my system i will remake my press in the future and i will separate the pump from the ram to use it like yours. thanks 👍
@Ntwadumela17 ай бұрын
You don't need to modify anything, just insert the lever from the other side and your pump will work on the down stroke. The Polish company SKAMET also makes such presses with bottle jacks in the reverse position.
@oscarvogel21406 ай бұрын
I like how he solved the problem of air going to the top. Where the pickup usually is.
@TheHomecrafter19886 ай бұрын
Thanks
@cuttersgooseАй бұрын
You do genius work …I love watching your videos
@TheHomecrafter1988Ай бұрын
Thanks brother
@karmicmessenger Жыл бұрын
I made a press with this kind of jack but I left it upright; all I did was weld a plate to the top of the jack and mounted it like that. In my opinion, why risk the leaks? It has worked without problems for over 20 years.
@zhookeeper Жыл бұрын
Yep, I love the detail in the video, but I'm a bit lost as to why it needs to be inverted to use as press?
@TheHomecrafter1988 Жыл бұрын
Thanks. This way I don't need other parts to use it.
@MASS18667 ай бұрын
This is a great video. I’ve always wanted to open up a hydraulic jack. It’s amazing what you can build out of your own stuff when you have the time and or need for it. Thank you.
@TheHomecrafter19887 ай бұрын
Thanks brother
@Hogslice2 жыл бұрын
I looked for a way to make hydraulic press and your video appeared. Your explanation of how to do things and why you do them is excellent. Your workmanship with limited tools shows your creativity. I like people who troubleshoot and find a less expensive way to do things instead of giving up and buying a tool. Great video! I subscribed and will share.
@TheHomecrafter19882 жыл бұрын
Thank you for this kind words 😊🙋
@mehdikaanine-sj7tt7 ай бұрын
Mm😊
@mehdikaanine-sj7tt7 ай бұрын
L
@jacquespoirier9071 Жыл бұрын
you made 2 errors in that conversion, the first one is to not seal the pressfit of the copper tube in the base of the jack, the second one is to rely on the Oring on the jack cover gland to insure the oil tightness when the jack is in reversed position, a spring loaded oil seal is a must. I learned it the hard way. good video.
@cristianpopescu782 жыл бұрын
Great work,very good explaned! 👍
@TheHomecrafter19882 жыл бұрын
Thank you 🙋
@ypaulbrown5 ай бұрын
great video, thank you for sharing your knowledge.....Paul in Florida, USA
@TheHomecrafter19885 ай бұрын
Thanks Mr Brown Mohamed from Algeria
@bourbonbeertractorsandprep9335 Жыл бұрын
Next time instead of holding the jack in the vise to remove the large nut just use the vise to grip the nut in the upside down position and just turn the entire jack instead. Much easier that way brother. But don't get me wrong you did great on the jack!
@pitmaster4860 Жыл бұрын
The hammer next to the crowbar are the best tools ever.
@patrickhenigin48052 ай бұрын
Old muffler man's motto, "don't force it, get a bigger hammer".
@GR-uy1hx Жыл бұрын
Really Good, Great Work. Love it.
@TheHomecrafter1988 Жыл бұрын
Thank you brother
@aussiesmoko Жыл бұрын
It's amazing what you can do with a piece of wire, a sheet of corrugated iron and some imagination... I liked it when you said the hammer is a very useful tool... You don't use brute force or muscles you just get a bigger hammer Is there anyway of connecting a pressure gauge to the jack or press to show how much pressure is being created 🤔. Just an idea Great work . Giday from Australia 🇦🇺
@TheHomecrafter1988 Жыл бұрын
Thanks Andrew your brother from Algeria
@Z-Ack Жыл бұрын
So you drilled a hole, put a pipe in a different hole, no addition of any check valve? And only other thing was drill an oil fill hole?? Confused
@asslam11 Жыл бұрын
Tbark allah 3elik a khoya,
@abnad282710 ай бұрын
Good video,👍👍👍where did you buy the seals? Thank you in advance. From France
@TheHomecrafter198810 ай бұрын
Thanks. It's car engine sealer from any car part seller
@andreascarlberg3998 Жыл бұрын
Good work, skillful man.
@TheHomecrafter1988 Жыл бұрын
Thanks
@Gar99 Жыл бұрын
You must fit a one-way valve in that long pipie to assist with flowback
@khimsophacarfixing Жыл бұрын
This is a good technique 👍!
@TheHomecrafter1988 Жыл бұрын
Thanks 👍
@patrickhenigin48052 ай бұрын
Nice job man. I think I'll just use the press upside down.
@ar.al.7780 Жыл бұрын
good job. but I have a question what is the point in inverting the jack. it can be used in it's original position
@TheHomecrafter1988 Жыл бұрын
Thanks I did this so I dont use more steel then I need and use directly the piston of the jack
@stephenspreckley82198 ай бұрын
Very clever.....yet why not just install the jack the right way up? That's what I did to make a press.
@TheHomecrafter19888 ай бұрын
Thanks.This way I will use less steel and i can slide it from side to side
@jackrichards1863 Жыл бұрын
Nice job Mr.👍👍👍👍👍👍😎
@TheHomecrafter1988 Жыл бұрын
Thanks 👍
@naoufel76763 ай бұрын
Good job, nice video and great explanation, I like your way of doing things. Thank you and vive l'algerie❤
@TheHomecrafter19883 ай бұрын
Thanks weld bladi 1,2,3 vive l'Algérie
@alitn5882 жыл бұрын
Nice job
@TheHomecrafter19882 жыл бұрын
Thanks
@estrelaprestadora6758 Жыл бұрын
Top, já fiz e ficou bom
@jimmybritt9537 Жыл бұрын
" nice conversion 👍👍🇺🇸 "
@TheHomecrafter1988 Жыл бұрын
Thanks brother
@michaelnelson91404 ай бұрын
I have tried inverting hydraulic jacks before, and they never work! Like the fluid in them drains to the other side, and they won’t pump. But they have enough fluid in them, because they always work just fine the right way?
@TheHomecrafter19884 ай бұрын
I'm using my hydraulic jack on my press inverted for two years and I found out that I need to keep the return valve closed and the pump handle down 👇 ready to pump .Sometimes I don't use it for months but when I do it always works
@RustyInventions-wz6ir4 ай бұрын
Very nice work
@TheHomecrafter19884 ай бұрын
Thanks brother
@woodennecktie Жыл бұрын
if there is any improvement to be made , than its having the press work from underneath , a million more possebilities ... so turning the jack upside down is loosing strategy
@thrustprop67 Жыл бұрын
you make a first rate video ,,, like the music too
@TheHomecrafter1988 Жыл бұрын
Thank you brother ❤️
@naingmoehtet8995 Жыл бұрын
Is it enough one 9mm pipe? What about other ?
@TheHomecrafter1988 Жыл бұрын
You can use a smaller size even 6mm it will fit without drilling
@naingmoehtet8995 Жыл бұрын
@@TheHomecrafter1988 I mean other drain hole, close or open?
@dennisw735011 ай бұрын
really enjoyed your vjdeo
@TheHomecrafter198811 ай бұрын
Thanks 😊
@KarasCyborg5 ай бұрын
Using your impact hammer punch tool to open it.
@nunesmotos351 Жыл бұрын
No preço que ta uma prensa é muito válido a idéia super top
@pinocolada4254 Жыл бұрын
Yes it is. I wanted to buy a press last year, didn't do it. Looked this week, price had doubled. So, 30 tonnes bottle jack and the trick from this video it is.
@antoniomontana2232 Жыл бұрын
Пробку надо было хотя бы на 16 мм приварить, чтобы со шприцом не заморачиваться . А идея и исполнение- достойные!
@luckyj13k84 ай бұрын
Question! why can't you just mount the jack facing down on a steel frame and use as is? Great video though!
@TheHomecrafter19884 ай бұрын
Thanks. I flipped it so I use less steel in the press
@readthebible1958 Жыл бұрын
Liked the video but not the music.
@TheHomecrafter1988 Жыл бұрын
thanks I'll not use it in my next video
@readthebible1958 Жыл бұрын
@@TheHomecrafter1988 Thanks. I will subscribe.
@brianleduc22446 ай бұрын
After all this !!! Should took 10 mins more and finish the jack probably so the Handel will pump the sameway it did befor the chang over ,,,, does lifting the handel and press easier 😮😮😮
@JamesHawkeYouTube Жыл бұрын
I have big piston. It has large diameter.
@user-ds6qf2mv1q2 ай бұрын
правильно, что сделал отверстие выше бывшего заливного, иначе не качает
@emailtour2 ай бұрын
आप lock plyaer से भी फिक्स कर सकते थे होल क्यों किया?😮
@ezwa997911 күн бұрын
I heard these dealing balls work on gravity?🤔
@TheHomecrafter198811 күн бұрын
They work under pressure and there is a thin washer that acts like a spring to keep them in place
@mastourabderrahman694 Жыл бұрын
الله يحفضك وين راهم فيديو نتاعك بالعربية نحتاج فيدو منهم
@TheHomecrafter1988 Жыл бұрын
amin akhie supremethom
@josephsaucedo8691 Жыл бұрын
It would of been easy to just cut off the piston off the 3ton and get square like tubing weld a small channel iron on each side and weld the 3 ton piston in the center and weld a plate for base to mount the hydraulic straight up you can also put return springs if wanted. 👍👌✌️💯🛠️
@TheRealCheckmate Жыл бұрын
*Hmmm, used motor oil inside the jack. Let me guess... Russia?* 😁
@TheHomecrafter1988 Жыл бұрын
Hhh too far Algeria
@howardosborne8647 Жыл бұрын
I've seen plenty of the same bodge work in Britain also. Cowboy work and bodging isn't unique to Russia.
@user-sr7nv8iu2j5 ай бұрын
عالی
@abdeljalilabdeljalil9022 Жыл бұрын
الرجل الحرفي
@Global7774 Жыл бұрын
Слишком много масла залили))
@tpep16938 ай бұрын
Every bottle jack I have turned up side down, would NOT work, Hmm.
@lelearmi61867 ай бұрын
Greetings . for technical questions; do you have an email address?
@salihxojaumarov9345 Жыл бұрын
З ru malikam sevgilim w
@engan7417 Жыл бұрын
Wor
@charlesball1308 Жыл бұрын
Upside down jack don’t work
@TheHomecrafter1988 Жыл бұрын
yes they do work if you did this modification and i have a press build on my Channel and I'm using it for a year now this way without a problem
@scroungasworkshop4663 Жыл бұрын
Yes it does. My press has an up side down jack for many years and works perfectly.
@ianrobertson3419 Жыл бұрын
You have to make sure that it's a multipositional jack. You are correct in that the cheap jacks won't work upside down. The labour in this video isn't worth it, just buy a press or build a frame type that takes a bottle jack without the hassle.
@howardosborne8647 Жыл бұрын
It works just fine if you modify the oil reservoir pick up point as he has here.
@hunterburrell5430 Жыл бұрын
I love you meth
@TheHomecrafter1988 Жыл бұрын
Thanks
@whitefox9 Жыл бұрын
That table you working on is not suited for what you doing
@doughunter3967 Жыл бұрын
good vid, thanks for sharing, if you get a thumbs down it is because my computer and boobtube are acting up...thanks again friend...doug
@TheHomecrafter1988 Жыл бұрын
Thanks Doug for stopping by
@bartstewart1807 Жыл бұрын
It will not work upside down you must have a mechanical jack the fluid will be at the top of the jack and the pump will run dry
@TheHomecrafter1988 Жыл бұрын
I made my press and I'm using it for more than a year with no problem watch the video of my press