Over View On the D6 Duo Pro Charger - Quick Tips On charging Batteries

Check out the awesome D6 Duo pro charger from hobby mate!
HobbyMate: hobbymatehobby...
Amazon: www.amazon.com...
Click here to subscribe► bit.ly/FTBuildsSub
FT Crafty Kit► store.flitetes...
Check out our FT STEM Curriculum: bit.ly/34kejGx
Our go to for Pilot training and Drone education!
Pilot Institute: bit.ly/33vgBTh
Adams ReadiBoard/Flite Test WR Foamboard: bit.ly/3kpK1sj
Helpful videos►
How to Center Your Servos► • How to Center Your Servos
Connecting Electronics► • Flite Test - Connectin...
6 Tips For a Successful First Flight► goo.gl/l1KbCk
No Knife - Building► goo.gl/tJdf4K
Visit our site for more content and to join our community► www.flitetest....
Check out hobby products► www.flitetest....
Thanks to our sponsors for helping making these videos possible. By supporting these companies, you support us:
JLCPCB: jlcpcb.com/cyt
Pilot Institute: bit.ly/33vgBTh
Adams ReadiBoard/Flite Test WR Foamboard: bit.ly/3kpK1sj
Follow us on Social Media!!!!!!
Instagram: @flitetest
Twitter: @flitetest
Facebook: / flitetest
ASMR

[@scottfirman]

If I had a dime for every time someone's channel covered a charger and everyone rushed to order one,I would be rich. I will continue to use what I have. It's been faithful for 5 years and counting.

[@borgonianevolution]

I recommend no matter what charger you have you do not use the discharge setting. 1st it takes forever and a lot of times you forget your working with a lipo. 2nd the unit gets hot which will degrade the charger components over time. I find it best to just plug it into your air craft and run it down a bit closer to storage letting the motor run about 1/3 to half throttle. It takes far less of your time and its much safer all around. Once its down closer to storage you can leave it at that or finish getting it to perfect storage charge on the charger.

[@saow]

I love my 14€ Aokoda discharger (it uses 3 bulbs) completely silent and fast.

[@abbenson3282]

Wow this is nice i have learned a lot just got a D6 Duo pro yesterday and wanted to know more about it and so far this is the best video

[@1212354a]

I started with a Prodigy charger from Flite Test. Added a Venom Pro Duo, now I will have two double chargers so I can be ready for the field in less time! I like the big, digital screen.

[@everytomday]

Just bought this yesterday, great timing!

[@enriquekramer4590]

Joshua Bardwell recommended this charger many years ago. It is a brilliant product!!! I have two of them...

[@weihong8337]

I had one, really great.

[@paulduffin131]

Just got one, it is a 5 star charger very impressed

[@YTFPV]

Great video and well explain i just bought one and i am very happy !

[@f2f.photography]

Super outstanding and thorough video. Thank you!

[@saow]

I've been using it for years to charge 8 Lipos at 2C (on 2 separate paraboards) simultaneously at max power with a big power supply, it's great ! Much better (reliable) than the ISDT crap that always end up bugging in the long run.

[@FPVSlice]

You use the DC plug at the back i assume? Cause 100 watts per rail wouldn't be enough i assume :D

[@saow]

@@FPVSlice yes, DC plug, with a big 1200W PSU

[@MaxPower-zp7wy]

Hi. no one has demonstrated external discharging ??

[@soominfoo7127]

hi, if we want to charge two batteries with different capacity, how do we set the capacity for different batteries ?

[@TheChampionluva]

So you can connect a 3s battery and a 4s to the same charger and charge them both at the same time with no harm?

[@AngerFPV]

What is the average life space or cycle span for battery’s I realize every battery’s different but at what point should I be saying this lipo is no good. I’ve never got rid of a battery and some fly like shit and some with like 30 cycles fly fine. Can someone explain the things to look for when a battery is no longer “good”

[@raven_fpv]

When are you guys going to do the second half of the ground station PCB build?

[@shaneintegra]

How does this conpare to the HTRC T400 Pro?

[@ironstore494]

Very nice video. This Charger is 200w total, meaning 100w each chanel. Can o charge 2 zees 5000mah simultanious?

[@keyvenblocker1212]

Would have been nice to know when it gets to full charge…..back to google I go

[@IngAEL]

Very good video thank you

[@Pablocabrerapvc]

My D6 does no change my battery’s more than 80% 😢

[@RLeeVisuals]

So why is it when the xt60 is connected you get a different reading?

[@buddyro5]

Can the dc side be connected to a car battery when you’re in the field?

[@spencerpeyton8272]

Question. I want to cycle nimh batteries 6 cell. I use a turnigy reaktor now, i can program it to cycle 3 times and discharge down to 6v and charge it back until delta v is reached. This charger doesn't seem to have that function...is there something i am missing

[@we4fm175]

Just retired and getting into the hobby. I'm interested in purchasing this charger. I need advice on what adapters and/or cables are needed to charge an E-flite 7.4V 280mah 2S 30C Lipo Battery: PH Planning on getting the kids and grandkids into the hobby! Thank you for any help, its much appreciated.

[@Starkman3]

Hey guys, enjoy your videos. I have a Toolkit M4Q smart charger that does what I need, but the balance plugs won't stay in unless I put something heavy in front of them. I know it's been a few months, but how are the balance connectors on the D6 Duo Pro? Is there enough tension to hold the balance leads in? Really appreciate the help!

[@laurensbeerendonk2832]

Is the fan Noisy?

[@mikeerwin7078]

I have a connector for the back xt-60 to clips for a car battery but mine does not work when connected to a car battery not sure if I'm doing it wrong can someone please tell me how to run this charger from a car battery please

[@elsonalbao4824]

A very simple question not answered. How to know if the battery is fully charged.

[@HALOCRAFT3568]

Hello, what is that xt60 adapter called, i haven't been able to find it anywhere

[@texasuavpilot]

RC Lipo Battery Charger Adapter Connector Splitter Wire 8 in 1 Octopus Convert Cable to XT60 Plug Lead Cable for TRX, T-Plug, Futaba, Tamiya Mini, XT60, EC3, JST, Tamiya(XT60 Plug)

[@pabsvisions]

Thanks for the video! Do you think the HOTA D6 Pro could charge 9.3A for parallel charging 6 1550mah lipo HV at the same time?

[@TheSorters]

200 watt max for AC, so up to 21.5 volts should work at 9.3 amps

[@dishxpert]

What DC power supply do I use with this device?

[@TheSorters]

Mine says 6.5-30 volts for DC input

[@TOMSHOBBY]

It’s a decent charger ..

[@boomfiziks]

BluJ!