Flooring Tools and Tricks

[@BallawdeQuincewold]

No joke, this video actually covered all the biggest pitfalls

[@GenesisG70LaunchEdition]

This is straight facts!! Do the job right or don’t do it at all!

[@jacygardner2242]

Honest question. Why worry about the gap around the perimeter if you're nailing each board off anyways? Can't really buckle at that rate

[@DexBunny]

@@jacygardner2242 It's more accurate to say that the wood fibers swell rather than the wood moves. A board which is nailed down will still swell and contract around the nails, generally leading to a larger hole and squeaky floor. The nails hold the floor down and prevent gross movements, such as the floorboards sliding around underfoot.

[@RiverSLV]

Wrong where is the crackhead who steals all of your tools and shows up drunk 6 hours later

[@thomascolbert2687]

Except in Florida. Concrete subfloor is a completely different set of rules, unfortunately.

[@Moosegg2]

This has to be the most helpful 60 seconds of floor install content on KZbin

[@stashoski2675]

Nice being a contractor and have all the right tool this make the job go faster and right

[@diehardfan173]

It also makes a solitary professional boring.

[@michaelmiller5177]

A video essay on how the right tool for the job makes all the difference

[@effenfish661]

thanks for showing every mistake i made on the first and only time i installed flooring. well, not every mistake, i made a few more than you have shown

[@AllenandLorie7733]

All I can here is Jason saying "that's one way to do it."

[@milesharlan1]

PBB are the new flooring champions!! Will look forward to the longer version with details! Thank You..Keep up the good work!!

[@lonedesertfox]

Wow I did not know dewalt made a cordless flooring nailer!

[@terrydawson5304]

Just started watching a couple days ago. And learned a couple new tricks thank you.

[@bilbobeutlin1705]

you forgot the most important tool : knee pads! You only have one pair of knees, you should protect them.

[@T.E.P..]

This was a pleasure of a vid ... super creative idea guys!!

[@54mgtf22]

Love your work 👍

[@rpproductions31013]

By the coolest most informative video ever!!!!!

[@rpproductions31013]

By far**

[@BRANDON-IRON009]

@@rpproductions31013 bro you can edit comments lol

[@AnomadAlaska]

Thanks for the short. I hate the algorithm asks you to do those, but you packed a lot of info in there.

[@theItalianshamrock]

The right tools make the job wayyy easier, faster, and higher quality

[@D-vv5yg]

Really good video on how to lay flooring the right way.

[@metallica990z]

Very good video!!!

[@MaggieGueder]

omg I love this channel so much!

[@KennyInVegas]

Thank God someone has the right tools BUT SKILL AND KNOWLEDGE also!

[@WWIIAddict]

Not as much fun without jays commentary 😂😂😂

[@Ghost-Mama]

You always need the right tools 🛠 and knowledge for the job… like choosing the right spouse.

[@rachelmoses5862]

No such thing as Mr or Mrs right lol 🤷🏾‍♀️👀

[@Ghost-Mama]

@@rachelmoses5862 well not with that attitude lol

[@shawnwood9875]

Great video. Better tools and experience means better and faster results

[@NoCompM2]

Damn. This is professional. Good job

[@JeanPierrepolnareff-cf1rv]

the gun jono pulled had me cracking 😂😂

[@Cjay-i9e]

Great content. Liked and subscribe.

[@ziggy4188]

What is the tool called that pulls the flooring by pushing the baseboard?

[@CR45H760]

the bullet tools sheer was a game changer when it cam out. cool video!

[@0xteknogeek]

right tool for the job, every time

[@DiegoHernandez-xt6vq]

Will you try the Reekon T1 Tomahawk Digital Tape Measure? Curious if it's worth it, especially since a lot of you and your crews' time is spent measuring!

[@brian2359]

Jason is the best

[@joetownsend-]

Excellent Video‼️ I want one of each‼️

[@tumuskurns]

Perfect flooring short fellas

[@UntilItIsFinished]

Actually easier to to keep a scrap piece of flooring, lock that into a tongue or groove, and use that to hammer in place.

[@mada90x]

As a professional hardwood flooring sander and installer I have nothing to say 👍🏻

[@julk9745]

Eres un chingon miguel.!!!

[@terencemerritt]

Didn’t know about that Dewalt flooring nailer 🤤

[@ksconstructionskill226]

The best tool❤

[@AllenandLorie7733]

I binge watched all your videos. And now I'm sad. 😂

[@Indica902]

Where tf was this video in my feed last week. This is amazing

[@stephenbianchi7141]

What is the name/type/style of the Dewalt nailgun that your using?

[@janpecha508]

thats is great job

[@adriandeleon8907]

Finally the Not so tiny house will have the flooring

[@NATExDAWG1]

What is that pushing tool for the planks at the wall?? My planks always seem to come apart when I hammer another section

[@Jason-ws3cd]

Right on, tools of the trade

[@austinsalters252]

I didn’t know Adam Sandler did flooring.

[@89Ayten]

They make electric, trigger operated flooring staplers now?

[@TheShelltrack]

Wish i knew how to finish my hardwood floors. I got Pergo Premium stuff and can't figure out how to do the edges around the walls and door frames. I'm assuming I need to take the door frames out. I removed the base trim.

[@KPCCarmzy]

Where can you get these tools?

[@walterdiaz2003]

A very creative video. I watched it twice. What type of flooring is that?. Good job! -w

[@towndrunkjr.5420]

I love the last one. I went to go lay a floor and he was talking about how he was going to "teach me how it's done" as soon as I saw him whip out his tape measure to mark his cuts, I knew he wasn't a floor layer

[@gwenienelson2535]

I needed those tools ths last 3 days

[@dominicvandermyde3773]

Where can I find links to these tools

[@ajeshvv3174]

This is the epic pro tip...

[@yossid422]

More of these

[@mathiassaleu9260]

Pro Tips💯. Love the videos, btw when's the windows coming?

[@jeffersonroth1638]

Glad you actually read my comment and got the “chopper”

[@saundrahonwytewalopez2286]

Is there an easy way to level a cement floor? My den has cement and I gonna put down tile. But I’ve noticed there’s a spot where the cement is higher, like a small hill, and it goes half was across.

[@mateomiguel8747]

What’s the one tool they added onto the dewalt nail gun?

[@fatcat-hc4pj]

Those cutters are nice where did you get that tapping block

[@joeschneider8025]

Your tapping block is a piece of shot Definitely a beginner tool.

[@rafaelramos2299]

What is the material that they used for the planks, I thought you can’t glue down the planks because it inhibits them from extra expanding and contracting somebody help me understand

[@punchogunter2362]

What's the name of that tool used 2 push the hardwood back off the wall?

[@hookedonthebay3890]

We have a machine similar to your cutter called the "d-cut" and it's made for cutting vinyl millwork wall base and can do different angles like 45s for inside and outside corners. Sweet!

[@chetflooringchetmaster]

Good❤❤

[@edwardgarza5104]

What type of flooring is that

[@LuisSanchez-ee4go]

where do i get the dewalt?

[@bryantwood10]

We need links to these tools

[@tannerbeverley26]

Wow this is a full tutorial

[@ricardosanchezmedina1552]

where I can found the tools ?

[@petermcgill1559]

I love that guillotine thing

[@debaser9169]

Not all flooring but engineered wood flooring 👌 that chopper thing is called a guillotine

[@Split_the_beer_atom]

When the floor was flat to the level, was that a planer he used to fix it? Can’t believe i never thought of that

[@carlosrosa9234]

Nice

[@MB12116]

This video serves as proof and justifies that Jaime and I both need and deserve more tools!! Lol

[@alexbickham9715]

Is that an attachment for the DeWalt second fix gun, or a whole new tool to get the secret fixings in the flooring…?

[@Beandiptheredneck]

How to use a couple grand worth of tools to lay a small floor? 😅 I always used a table saw, chop saw and jig saw, had good results with tools I already had 🤷‍♂️

[@juiceman1887]

All them tools look brand new as well, like bought for this specific job lol

[@keithlovoya846]

List of the tools ?

[@Gotfish]

hahaha i know exactly who you guys got the finger wagging meme from

[@leticiagonzalez4191]

Okay but the first shot had me convinced it was Adam Sandler!!!!

[@GarySixSixty]

yuuz guyz rock…

[@brtko_marek]

Jaime reading all of the comments again! Hope you have a great time Jaimo (in Jaysons voice) XD

[@d3lsl0w]

This video = “they make tools for that.”

[@mindbender3379]

Saw-weet!!😎

[@XroorX]

99% of the people that recently did their floors didn’t know these tools existed….

[@brownpride5125]

Name if the tool for squeeze

[@khaledacar3814]

Pretty much everything you need to know in less than one minute

[@darkJohnSmith]

I need that spreader thing

[@danewgirl4]

The finger shaking 😂

[@jesusguzman8449]

Estos camaradas son de los que llegaron a florida ultimamente

[@jacobmccann3830]

What is this witchery tge right tool for the right job that's crazy talk

[@Dominator_5]

My dad watches you everytime

[@ouragan8539]

If you have the money to buy all the tools then it's easy

[@Ericbjohnston5150]

Put down underlay, install click floor and done.

[@craigjennings1542]

You missed the most important hack. How to measure the skinny boards at the end

[@Motivation_One88]

Name of the tool at :10 please :D

[@josephwhite7646]

No under layment and I was told I had to have it for my floor

[@MrMain1985]

Why’s the tool called you use instead of the chisel?

[@AlexanderSurik]

Здравствуйте. Где купить зажим для последней предпоследней доски? И как этот инструмент называется? Спасибо

[@brycehinton7860]

I think advantech is great, but I found it very ironic that when you're planing the joint flat you can see the"flat out best" printing on the floor. 😏

[@Fox64]

I like how the last pro tool is a pencil.