Fluid Power Simulation with Simscape Fluids

Learn how to model, simulate and deploy capabilities with Simscape Fluids™.
Get a Free Simscape Trial: goo.gl/6372dP
Get Pricing Info: goo.gl/kDvGHt
Ready to Buy: goo.gl/vsIeA5
A backhoe arm with three hydraulic actuators is used to show some of the modeling, simulation, and deployment capabilities of
Hydraulic networks are defined within the Simulink® environment using Simscape™ physical connections. The hydraulic network is integrated with realistic loads modeled as 3D mechanical systems in Simscape Multibody™. Simulation tasks such as optimizing the design, tuning parameters, and hardware-in-the-loop testing are also shown.
With Simscape Fluids you can:
Model hydraulic systems with components such as valves, cylinders, and pipelines
Define custom valve models with configurable levels of fidelity
Create custom components with Simscape language
Automatically tune parameters of components to meet system requirements
Run simulations in real-time for HIL testing
Hydraulic systems vary widely in size and complexity. Simulating hydraulic networks together with mechanical and control systems is critical to optimizing system performance. To ensure that testing is efficient, Simscape Fluids offers a number of ways to easily balance the trade-off of model fidelity and simulation speed. The ability to generate C code from the model enables engineers to use Model-Based Design for the entire system (plant and controller).

[@amr.a-m8350]

Good video. I hope to know how to enter the measured data for parameters & response for optimizations . What meaning of cmd & the used controller.

[@qayyumakmal5876]

is that any video tutorial to simulate the single acting hydraulic cylinder sir?

[@ReDDeViLW1nS]

Where can i get the MEchanical System from. The bagger arm that he imported ?

[@HieuNguyen-wf1bk]

hello, Can you tell me the parameters in the hydraulic part?

[@krishnahariharan8202]

simulation video is not moving for me! is there any possible reasons

[@justamoment7421]

how can i find tilt actuator ? i can see, pls help me i use matlab 2023a

[@briam132]

nice video, but i hope you create a introduction step for step simscape fluids

[@omaralmasri6720]

please what is the SS intf

[@govikanesen5054]

why I a not getting the graph as the video shown

[@sakalaalidon]

Thanks a lot Mr Miller for the wonderful presentation, it's very helpful.I would like to know how you created the 3D model of the Backhoe Arm, was it created from the Simscape libraries or rather you used other software programs?

[@thegud_engineer7544]

Please show how to make 3d bucket model.

[@austineadah2843]

Hi,has anyone answered this question?

[@VivienFedak]

How to model solid impurities in filtered liquids

[@ahmedj.abougarair3500]

Good video

[@user-pp7np7oh3c]

Worth perfect I understand.

[@kingsgambit]

It is not possible to build the system with the inputs you give in the video and receive the same results. I guess some standard values or parameters of the components have changed since then, but it´s a frustrating experience. I followed each step precisely and my piston movement or spring contraction is in the e-7 area ...

[@polyxengineering3857]

I had the same problem. It is not clear when giving the pump displacement what the units are. I guessed m^3/rev, but did not get same result.

[@danielseer5099]

had the same problem: you have to use 5e-4 m^3/rad for the pump displacement in order to produce the correct output :)

[@ylk6445]

Your comment solved my problem, thanks!

[@ylk6445]

@@danielseer5099 Your comment solved my problem, thank you

[@omaralmasri6720]

how can make it

[@sarveshdarade9128]

download

[@quteibaalsalaa6346]

@@sarveshdarade9128 from where link please!