Flushometer Tailpiece Removal Instruction

[@PetePuebla]

Thanks for providing this valuable video. Hope to see more product installation videos in the future.

[@sloanvalve]

Thank you, appreciate your support.

[@Kevin-b1t3y]

Are the threads fine or corse?

[@cpoul]

What is the purpose or why would you need to remove the tail piece? Great videos.

[@jessegriffin7200]

Length

[@tacticaladvance3827]

Can u make a video about tools a available for remove and change pieces in faucets and flushometers

[@wilfredolopez893]

Will it work ok if I put a 1/2 pipe reduction at the entrance of the 1”inch entrance the flush valve?

[@jordansantanen4144]

Can you please give me a link to the Sloan specific tools used in this video

[@sloanvalve]

More details on these specific tools can be found on our repair parts & maintenance guide: www.sloan.com/sites/default/files/2020-02/ToolsAccessories.pdf. Our where to buy page (www.sloan.com/company/support/where-to-buy) directs you to a seller near you who may carry these parts.

[@wallacetom1]

What is the purpose of the lock ring on the tail pipe?

[@sloanvalve]

Thanks for asking. The purpose of the tailpiece locking ring is to hold the flushometer in position with the control stop, when the tailpiece coupling is tightened. The mechanical straight threads of the Tailpiece Coupling and Control Stop draw together against the locking ring to bind into the tailpiece; and the tailpiece O-ring seals off the water.

[@salehss9189]

I got a problem with the same modle, wich keeps running water after 6 months of great work. What do you think the fouls?

[@sloanvalve]

Hi Saleh, thanks for letting us know. Our tech supports can help you address this. They can be reached at 888-756-2614 during 7:00 AM - 5:00 PM (Central Time) Monday through Friday, or by email at [e-mail].

[@PsychoReaper49]

I'm replacing a tailpiece and it keeps leaking at the threads. Any tips to keep this from happening?

[@sloanvalve]

Matt, thanks for reaching out! Our tech support team is able to help you with this. They can be reached at [phone] during business hours between Monday to Friday, or by email at [e-mail].

[@jesusvelasquez3612]

En español.

[@PsychoReaper49]

What kind of pipe sealant you use? I used teflon tape, and when that didn't work I tried pipe dope.

[@saltypipefitter4618]

you do not use pipe sealant on flushometers

[@WAYNENYC100]

From the Sloan website - Attach the new tailpiece to the valve body by turning it clockwise. Use teflon tape (or pipe sealant) on tailpiece pipe threads. Note: Do not use sealant on the first few threads of the tailpiece. Ensure that the coupling and the locking ring (adjustable tailpiece only) are on the tailpiece before tightening the assembly.

[@johnnymedrano7081]

Who has all that on hand? Unless you actually work for Sloan?

[@sloanvalve]

Johnny, we understand the concern. Our parts page helps facility maintenance staff identify what they need and be prepared (www.sloan.com/commercial-bathroom-products/parts). Also, our Sloan Connect app tracks the usage on Sloan bluetooth products with reminders on which parts to order and when (www.sloan.com/design/connected-products).

[@Fbb1010]

Doing too much