Fly Sky GT3B Setting Endpoints And Transmission Problems Resolved!

[@jasonyoung4651]

Thank you for the radio info Was wondering inside the diff when you first open it up. Do the gears get any type of lube.

[@eastsiderc]

Yes they do a thin layer of your favorite grease will just fine! I will go over that soon in PJs transmission build.

[@justincase948]

It’s so crazy , I a kx 500 in 97 ... Good times my brother wish I kept that mad machine but I know I couldn’t kick that that beast over now a days .. 👍👍 awesome vid and keep on keepin my friend . God Bless u and ur family ..🙏🙏🙌

[@tonymanna9160]

Good stuff. Just got that remote with my Baja so good to see all that stuff. Now I don’t have to read the instructions lol

[@eastsiderc]

🤣🤣🤣 the instructions suck and dont tell you how to set endpoints lol. Thanks for tuning in brother Im glad to help!

[@4D_Recovery]

Thanks for the tech tips Jeff I don't even have my RC Truck yet but by the time I do I can make it Tight n Right clean and mean !!! Still set on your recommendation of the DTT 7 V2 I haven't even found any brap videos of one with the 38cc billet engine.

[@eastsiderc]

If I didn’t have so many, I would get one and run it on the channel for you, brother Wayne! I think Thunder RC ran one in his didn’t he?

[@4D_Recovery]

@@eastsiderc With a Taylor 46GT

[@eastsiderc]

@@4D_Recovery I think he did a 38 run in it too.

[@316RC]

Very good Jeff, 👍 we need more on controllers and electronics sometimes. It’s surprising we take for granted but guys need to understand it. Thanks for doing this. God bless brother 🤜🏻🤛🏻

[@rccustoms3176]

Great video brother perfect I go to start setting endpoints on my new 5B and you put a video out at the same time on how to use the remote that come with my car

[@eastsiderc]

Fantastic brother thats why Im doing this stuff to help others!

[@jesusbloodneverfails7437]

Oh thanks man..I was scratching my head on this reverse and brake..This is just excellent...

[@jase-barber-73]

Morning Jeff ..great video pal very informative..also like yourself my ocd in working in a clean tidy workshop makes a big difference to the job at hand ..take care brother ..all the best from 🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@eastsiderc]

Thank you brother! I appreciate that! And definitely gotta work clean n neat!

[@SEEYAIAYE]

Thanks man this helped a lot, I got a GT3B and am just getting to fiddle around with it, want to install some better servos so knowing EPA is a must.

[@eastsiderc]

So glad I could help brother! Thanks for watching

[@operator5677]

Love that magnetic bit holder on your wrist! Your the man and learn a lot from you 👍🏾

[@dinh71]

Thanks, Man, I needed a refresher course on that epa adjustment!

[@eastsiderc]

Well Im real Glad I could help!

[@thatoneguy2756]

@@eastsiderc Is this the radio you have been using? Do you notice any lag or latency issues with it?

[@eastsiderc]

@@thatoneguy2756 I do not use this radio bro! I only use Futaba because I feel they are the best for me and the safest! I would have to have a high dollar ride run away into a tree. Sorry for the late reply I had to hunt this down I thought I deleted it 🤣 Have a great day brother

[@dougwellman2444]

Very nice to know 👌 the first time I messed with this stuff ,,,,thanks

[@eastsiderc]

Hey you’re very welcome Doug that’s why I do what I do to help people out. Hope you have a great weekend.

[@julzrio8157]

Setting end points starts at 14:00 minutes.

[@eastsiderc]

Sorry took so long! I like to explain things

[@robsr.5518]

Hey guy good instruct but to must say which channel for your servos, Chan 1 steer-Chan 2 throttle, But good instruct.

[@eastsiderc]

That should not need to be said with RC cars that is common sense its always channel 1 steer throttle 2

[@ak.disney4224]

Hi mate I have a problem with my fly sky gt3b or the ESC when throttle the esc just blinks red is it the esc or the controller or is it the throttle trim or endpoints the ece is ftx 60amp brushed also the car stairs but doesn't throttle

[@kylekallies3381]

Thanks for this video I was trying to figure out the throttle rate and this help out a lot

[@eastsiderc]

Hey man you’re welcome thats why I do youtube to help people spiritually and mechanically! Thats what Im about! Welcome to the channel! 🤝

[@Grandpasrcbarn]

Awesome video realty like that thing on your wrist

[@eastsiderc]

Thanks man I got that for Christmas one year it came from Amazon. Thanks for watching!

[@stevendepascale8364]

I had the xxxnt when it first came out that exact one truck of the years was a big thing came with remote just like the gt3b same time rc10gt came out

[@eastsiderc]

I loved my XXXNT! Great truck! The little dynamite 🧨 engine just kept in ticking

[@stevendepascale8364]

Yea wish I held on to it, I see some being sold used might pick one up again was a pretty quick truck! It’s being called vintage now lol but yes I remember the engine pretty much was no maintance after breaking in

[@eastsiderc]

@@stevendepascale8364 exactly!! I sold mine for 65 bucks about 7 years ago. I bet the guy still has it!

[@happykillmore349]

Fantastic video my dude. All setup in less than a few minutes.

[@eastsiderc]

Thank you man I really appreciate it! Hope you have a great week!

[@4D_Recovery]

I was just thinking "Drum roll" for running an engine in, if I wanted to not exceed say 50 percent I could set the epa to 50 on throttle and be 100 percent sure its not over revving ? Cool stuff

[@eastsiderc]

Yes you sure could that brother. The more money you spend on your radio the better signal and response you will get from it also longevity and reliability will be a factor as well. I highly recommend Futaba radio systems as they have never let me down

[@jamesmclean7757]

Kinda off topic you still have that gorgeous KX500? Looks like you must have gotten it brandnew it's too clean to be used! Did u do any professional racing back in the day? I'm a huge 2 stroke fan it's my other hobby building and restoring vintage Dirtbikes!

[@eastsiderc]

Hey James no man I wish I still had my kX . I did buy it brand new. I rode that bike more than any motorcycle Ive owned! It was my favorite! It had brute force torque like no other two stroke and the deepest tone ever as it would only tach 6000 rpms lol. 72 horsepower of pure fun. You could leave in third gear and trail ride all day!

[@robertdejesus9881]

I’m trying to set up the Killswitch on my RC. I have the same controller. How can I do the settings on the controller?

[@eastsiderc]

If you have the kill plugged into channel three youll simply need to activate channel three in the remote

[@robertdejesus9881]

How do you activate it on the controller?

[@soblessed6438]

I’m sure this will help a lot of people son. You did good!

[@GuitarGuys7299]

I wish FlySky would've added a Subtrim function.

[@truthinrevolt6843]

Love the verse. Thank you.

[@eastsiderc]

Awesome and you’re very welcome! I sneak those in on every video! I just a normal dude who loves to share about Jesus!

[@truthinrevolt6843]

@@eastsiderc awesome man! I just got into rc when my brother in law gave us his old one with a munch of spare parts. Trying to figure it all out

[@kgm5512]

I love this radio but it comes with no instructions. Nice info 🤙🤘🤘

[@bossmanrc4248]

That's what's up brother nicely done I have that same one that's going to help me out 👍🏿

[@GHOSTsq]

What channel 3 is that for the servo

[@eastsiderc]

Channel three is for the kill switch or if you dont want to use the kill switch you can use it for lights

[@Victic005]

Never thought you would use that radio.

[@eastsiderc]

Haha nope Im a futaba guy always have been! I own three futabas the 3pv the 4pv and the 7PXr all super great radios. The 7 is my fav.

[@Victic005]

@@eastsiderc I was surprised to see you using that the other video running the big truck .

[@justincase948]

Tight & Rite brother ..

[@stevenpeters2593]

When I watch it I look for something missing it! then I say oh that saw it a while ago. Missing for the wall! You know 🤣🤣🤣

[@petersdragon8048]

How do you calculate it?

[@eastsiderc]

The endpoints?? You have to observe it an make sure you are not overdriving the servo and the part you are driving with the servo!

[@glenngillan739]

Man thanks for showing us that it helps out

[@eastsiderc]

Yessir sorry I missed this comment youtube just released it 5 months late

[@jameswilliam2072]

thanks brother! helps me a lot

[@eastsiderc]

James you are very welcome! This is why I do this stuff! I love to help people!

[@tomschukis9336]

" Primal RC is the place to be!" Primal,...... Primal...... Primal. Brap!

[@stevendepascale8364]

Good video isn’t boring

[@eastsiderc]

Thanks man I try my best to deliver good content and not make it boring or monotone.

[@dat2498]

I love that 500 brother

[@eastsiderc]

Thanks Charles 🤝

[@karenread1665]

😁

[@GHOSTsq]

What do u mean kill switch

[@eastsiderc]

A kill switch cuts the engine off automatically or manually by a button in the controller. It protects your investment and others around you in the event of a runaway.

[@GHOSTsq]

@@eastsiderc how do u do that make a video

[@eastsiderc]

@@GHOSTsq I have a video on it already

[@CharlesPierson-s1d]

Very helpful 👍

[@eastsiderc]

Awesome Charles I like to help brother! Hope you have a great weekend!

[@PDaal-yb7mz]

Nice vers Luke 9:23-24

[@eastsiderc]

Hey thank you very much! Its rare that anyone cares! God bless you bro! 🙏🙏🙏

[@robhagan1639]

Fly sky fa-gt3b

[@eastsiderc]

Thanks for watching

[@rockman49er]

Thanks brother

[@chris-ip4pk]

Worse transmitter ever made,the range is terrible

[@eastsiderc]

🤣🤣🤣🤣I use Futaba ONLY! Thanks for watching bro

[@rc_life8545]

1st

[@jonathansheeder5153]

Thanks man! My throttle was on 50% lol!

[@eastsiderc]

You’re welcome brother. Thanks for watching.

[@marcusharris3464]

Fly sky’s are 🚮

[@eastsiderc]

🤣🤣🤣 yup I dont use them! Futaba ALL the way! However not everyone can afford Futaba but even their cheapest radio blows flysky out the water. Both Chineseium but Futaba is the Apple of trasnmitters and electronics