'Flying' 60 Series Landcruiser - Gearbox and Transfer Case Strip Down - Roothy

[@jm6056]

Richard's knowledge is unbelievable. And its always good when people share that knowledge. Another great vid Roothy.

[@JOHNROOTHROOTHY]

Rich actually has a uni degree in car engineering - geesus, he's 'SMART'

[@melias67]

Love these old Toyotas, keep up the awesome content Roothy!!

[@JOHNROOTHROOTHY]

Thanks Melissa - we love 'em too!

[@Yesterdie02]

Love this and how you guys show how practical one can be....huge fan guys! Love from South Africa

[@jamiegreenwood7996]

60 series wonderful old girls i have owned mine for seventeen years has the 3F petrol with 500,000km s on it still running strong......... gearbox main shaft bearings rebuilt arond 375,000 plus added leveler hose between gearbox and transferre case......plus i own the 75 series ute with 1hz garret turbo both rust free reliable unstopable 4wds .....no intentions of selling either.....love the old landcruisers

[@JOHNROOTHROOTHY]

On ya Jamie - nothing better I reckon, except maybe a 40....

[@jamiegreenwood7996]

@@JOHNROOTHROOTHY yeah have to agree the 40...to unstoppable and tough looking old four wheel drives go the old landcruisers cheers john

[@Kstreetkings]

Thanks lads. Keep the 60 series vids coming! Love them

[@ivanolsen8596]

I bought a 60 series with about 60 thou on the clock, ran it just short of 800 thou, then sold it, stupid, stupid, stupid. It had the great 12ht motor, the only thing I did was service it. Up to the last, I never had to even top the oil up, Best set of wheels I ever had.

[@JOHNROOTHROOTHY]

I sold an 80 diesel once, our family car, all done up with everything - most stupid thing I've ever done.

[@ivanolsen8596]

@@JOHNROOTHROOTHY Thanks for the reply, John, from your videos seems you live near Caboolture, funny our paths never crossed, I lived at Beachmere for 8 years and worked at Moodlu and Torbul.

[@theamps25]

Great upload

[@simplemanduke7128]

Another great video Sir

[@thebushmechanic]

good tip for removing and installing gearboxes in 40's and 60's at home, pull the gearbox/shifter cover from the floor and use an engine hoist/crane in through the door to lower the box down on the ground

[@colinevans3285]

These videos are great

[@timfreeman2603]

Pretty sure I’ve seen that beast at Milford

[@mickwolf1077]

I gotta get this done for my Hj61-fj62 hybrid, she'd be due for it.

[@aureliendaudet9366]

Hello ! I just found this video, loved it, instantly subscribed to this channel ! I live in the mountains in Spain, my HJ61 is my daily ride ! Quick question : what are the wheels ? And the tires size please ? I have to change mine, these look awesome !!!!

[@jamesbushy9031]

I like the pommy mechanics walk thru commentary he knows is shit

[@jimtekkit]

I notice that nobody ever talks about backlash, which is a common issue with old trucks. How much is acceptable? Is it even worth worrying about? By the time you add up the backlash from the gearbox, transfer case, driveshaft, diff and axles, you can end up with 30 degrees or more of play in wheel rotation. But I doubt it's worth spending thousands to replace every single gear in the drivetrain just to alleviate the problem.

[@AndyL940]

Your right it does add up. I find most of it is in the diff spider gears they get heaps of play . As long as the wheels are turning all good.

[@mark2073]

I bought some old 80 series axles. The rear is super tight but the front has like 45 degrees of travel before the drive flange turns. That's going to need some work.

[@gtv83]

instead of replacing the whole shaft it is possible to rectify the worn bearing track and mount the bearing that goes in the opposite side

[@JOHNROOTHROOTHY]

Hi Simone, not really, the shaft is designed as a single piece and relaminating rarely works or lasts so you would be risking having to pull the whole box apart again.

[@gtv83]

JOHN ROOTH just di it in the gearbox of My Bj42 lx, the bearing of the front side of that shaft has the inner ring, so if you remove material from the shaft and go to the same size of the front side you can put the front side bearing with the inner guide.

[@JOHNROOTHROOTHY]

That's a fair work around, but still not sure how long that weakened surface on the shaft will last. Given the work that my mate Si's 60 Series does it wasn't worth the risk.

[@gtv83]

JOHN ROOTH for sure! obviously the best thing is the replacement, but in case you need to save some money it can become a solution... anyway good job, if you treat well they are cars for a lifetime, thanks for sharing your experience. 👍👍💪💪

[@paulthompson4326]

Howdy Roothy, I am about to rebuid the H55 and transfer in my HJ60, but I dont need to touch my clutch, can the gearboxes be removed from car but with leaving the bell housing on the engine , or would getting the clutch TO bearing be too difficult to get back on the sleeve, cheers

[@JOHNROOTHROOTHY]

Never heard of anyone trying that without pulling the bellhousing Paul - I know I haven't. You could leave the clutch on the flywheel assembly but if you're going this far make sure you replace the brass bush in back of the engine that takes first motion shaft ok? good luck

[@spicymchaggis2601]

I wonder if they got the parts from terrain tamer? I didn’t hear it mentioned at all 🙄😝

[@heijxje]

Well, if only they'd mention the brand of the oil....

[@harveysmith100]

It's the same old story, 630'000km. He changed the oil regularly. Do we see a picture here with high mileage?

[@JOHNROOTHROOTHY]

No you don't Harvey, but if you know anything about us you know we don't need to make stuff up.

[@bobhudson6659]

Should we doubt you as much as you doubt Roothy? Roothy has earned his credibility. Where do you stand? I think an apology to Roothy would be in order.

[@harveysmith100]

@@JOHNROOTHROOTHY Sorry John and the others below. I don't think my comment came across correctly. My point was that whenever we come across high mileage vehicles all across the world there is a common factor. Regular oil changes with good quality oil and TLC.

[@adolfadolfvich3253]

🎥 👍

[@ianrobinson4501]

Bet the new 4x4 won’t last as long

[@lastknownlocation8760]

Where the hell is part 2?

[@Quarry4x4]

I haven't watched this yet.

[@JOHNROOTHROOTHY]

Get the goods here mate www.roothy.com.au/product/roothy-movie-darwin-unplugged/ you can go old school DVD format or digital download.

[@paulnorth9107]

Borrowed a mates 45 ute once to get to bowen,put 20 litres of fuel in it and still ran out about 10 klicks out.....2f life

[@nigelperera673]

Roothy in a Nissan 😂

[@Clynikal]

2F motor 🤮

[@JOHNROOTHROOTHY]

That's what the original motor was and this was a classic restoration so no change.

[@FULLBOAR]

@@JOHNROOTHROOTHY the ol' 2f isnt the most technologically advanced engine, but theres still heaps running after 40 odd years.