I Bought Hundreds of Tools in 2024: These Are The Best!

[@cliff5240]

I normally don't care for all of the tool reviews that most are doing now but the ones you show are great because they are alternatives to the high price tools that other are showing - great job and some humor as well. Happy New Year

[@FlynndoggWoodwork]

Thanks so much Cliff! I appreciate that. I prefer the build videos too, they just take a long time to make. I will hopefully have some more soon! Cheers, and Happy New Year to you as well!

[@mikec2810]

Happy New Year Bryan! Thanks for a great 2024 and here's to an even better 2025!

[@FlynndoggWoodwork]

Thanks so much Mike! Happy new year to you as well! Really appreciate it!

[@afpitbull60]

Excellent list. I had some; added some to my wish list. Happy New Year my friend.

[@FlynndoggWoodwork]

Thanks so much! Happy new Years to you as well! Thanks so much for watching!

[@Oxcart19-s8r]

"The number of noodles in my favorite soup" took me a minute, ha ha. I have purchased several tools at your recommendation and all have been solid performers. Thanks for all the suggestions, and good choices.

[@mwoody4560]

Most of the attempts at humor are just dumb, some funny, and some just go too far; like the noodles. Really? Anal beads? I like your tool reviews and your woodworking demos. The jokes not so much.

[@FlynndoggWoodwork]

Glad they have worked out for you Oxcart!

[@kenerickson4923]

My Jorgensen 102 is my most used plane. Happy New Year.

[@FlynndoggWoodwork]

Me too! Crazy, would have never of guessed it when I got it either! Happy New you to you as well Ken!

[@DavidLucht]

Great list. Thanks, I enjoy your channel.

[@FlynndoggWoodwork]

I appreciate it David! Thanks so much!

[@gteam53]

I appreciate the recap and enjoy the information presented. You know how to spend smart money making woodworking both easier and better! Thanks!

[@FlynndoggWoodwork]

:). I try! Really appreciate it. Gives me an excuse to look for interesting tools! Thanks so much gteam53!

[@LLOR]

Lots of great stuff! Thanks for posting!

[@FlynndoggWoodwork]

My pleasure LLOR! Really appreciate you watching!

[@billybike57]

Always like your channel!

[@FlynndoggWoodwork]

Thanks so much Billybike! I appreciate that, thanks for watching!

[@projectrebuild908]

Great list. I hope some of these find their way into my shop in 2025

[@FlynndoggWoodwork]

Thanks so much Project Rebuild! Really appreciate you watching!

[@jimgoliver8598]

Thanks Bryan I'm on a budget and these tools are right in line for my budget. I did already have the Franklin stud finder and I really love it. You are amazing with projects tools and my money. Thanks so much

[@FlynndoggWoodwork]

My pleasure Jim! Thanks so much, Truly appreciate it!

[@Buffy1967]

Honestly I'm just not going to comment on the family channel comments lol . Its woodworking or maker space videos about tools and ideas. But you constantly entertain me and my friends so thank you and I'm buying a pipe clamp wall system soon . Perfect idea. But great tool list and more to come in 2025 , happy new year 🎊🎉

[@FlynndoggWoodwork]

I'm glad you are enjoying the channel and thanks for the kind words! A lot of people get bent out of shape about my humor, but I'm at least enjoying myself! :). Happy new years to you as well Buffy! Really appreciate it!

[@richardrollins184]

great job

[@FlynndoggWoodwork]

Thanks so much Richard! I appreciate you watching!

[@21thTek]

Great job, alot of time and effort, I really apreciate it !! ⭐⭐⭐⭐⭐

[@FlynndoggWoodwork]

Thanks so much 21thTek! I appreciate it! :)

[@daviddura1172]

HNY well done!

[@FlynndoggWoodwork]

Happy new Years to you as well David! Thanks so much for watching!

[@tpaulsmith7194]

I need 2 levels of hardness. Hell, at my age, 1 is never wasted. Happy New Year, Brian.

[@kwilliams2239]

One? You got one? 😁

[@FlynndoggWoodwork]

Haha! Love it. Thanks as always for watching Paul! Really appreciate it!

[@paulnicholas00]

Been awhile since I watched one of your vids Glad one popped up ❤

[@FlynndoggWoodwork]

Thanks so much Paul! Glad to hear from you. Thanks so much for watching!

[@robwilson2977]

You look great!! Burt must be on the same diet! Lol!!!!

[@FlynndoggWoodwork]

Haha! Thanks so much Rob! I appreciate it. He eats spam and I eat veggies... Somehow we are both losing weight! :)

[@dwightmayeux1479]

Great video.

[@FlynndoggWoodwork]

Thanks so much Dwight! Really appreciate you watching!

[@RaymondWilliams-x6i]

Great stuff. Thanks

[@FlynndoggWoodwork]

Thanks so much Raymond! I appreciate you watching!

[@syossetworkshop]

The Framing Square fence is a great idea. I hadn't seen it before this vid so thank you. I'm surprised that the Milescraft Tracksaw guide didn't crack the top 30. Perhaps it's because the WEN tracksaw system is featured in the list. I have to say that using the Milescraft guide system with my Metabo circular saw has been a game changer for me -- and the price is a steal.

[@FlynndoggWoodwork]

You know, I'm surprised that track saw guide didn't make it either. I'm guessing it was because I hadn't done the video for it when compiling this list together. Might be on next years! :). Thanks for watching syossetworkshop!

[@JamesShafer-uz2mt]

Great products! And enjoy seeing you losing that weight brother! Keep up the great work!

[@FlynndoggWoodwork]

Thanks so much James! I appreciate that! Hope you are having a great New Year!

[@patcross5799]

It was fun watching this list and seeing the tools/toys I bought this year as a result of your bad influence. Though I must say I've been very pleased with them. I've had that same stud finder for years, and it's the best I've ever used. Looks like Bert's been losing a bit of weight as well, tell him good job job for me. Looking forward to more of your bad influence in the coming year. Enjoy the weekend.

[@FlynndoggWoodwork]

Haha! Burt tends to do whatever I do. I think he's low on money right now so he can't afford to eat... which is probably a good thing! THanks so much as always for watchign Pat! Really appreciate it!

[@jimrosson6702]

Great video Bryan as always so many great tools I’ve bought the Bow push sticks and the Craig corner clamps I bought one off of marketplace so I couldn’t pass it up and I’ve also invested in some of the miles craft which I think is a great deal.Thanks for all the hard work you put into the videos and tools reviews much appreciated. You’re looking great keep up the great work. Happy New Year to you and your family 🍻🎉🍾🎊 Can’t wait to see what 2025 brings.

[@FlynndoggWoodwork]

Thank you so much Jim! Always a pleasure to hear from you! Glad you've found a few Gems along the way. You are wise to look on marketplace for many of these things. I should do a video on tools I get on Marketplace. I think that might make a good one! Thanks as always for watching! :). Really appreciate it!

[@jimrosson6702]

Ya that would make a great video being on display I’ve got to be smart with the little bit of money I have to buy tools so market place has been a lifesaver for me buying tools and then the deals from your channel for sure. Thanks again for all the hard work Bryan.

[@FlynndoggWoodwork]

@@jimrosson6702 I'm definitely putting it into my future video ideas list! Thanks again!

[@peterconnolly2724]

Thanks for this video. The least I can do is buy one or two of these tools from your affiliate link!

[@FlynndoggWoodwork]

Your kind, I appreciate the support whether you use the link or not, i think these are all some great tools! :). HTanks again from watching Peter!

[@waltertgtpassi.6035]

Bryan! Can’t find the pipe clamp wall mounts anywhere! 😢

[@FlynndoggWoodwork]

Ther should be a link in the description but they are made by a company called RS tools. Here is a link to their website: rstoolcompany.com/flynn Coupon code : FLYNN10 - To get 10% off.

[@waltertgtpassi.6035]

Much appreciate the reply and link! Always look forward to your new posts. Flynndogg Channel rocks! 👍

[@FlynndoggWoodwork]

@@waltertgtpassi.6035 My pleasure and you are way too kind! Thanks again!

[@vernsteinbrecker3759]

Wish they were that cheap in Canada

[@FlynndoggWoodwork]

Oof, I always hear that from my canadian viewers. Such a shame. Thanks so much for watching Vernsteinbrecker!

[@danielbackley9301]

As far as the extra-long locking pliers often called tongs by welders and mechanics, can be obtained at harbor freight for a couple of dollars less (reg prices) or less if on sale the shorter ones can often be bought for under $20 Bremen or even less (pittsburg). Or if the 30% off coupons is available.

[@FlynndoggWoodwork]

Excellent Thanks so much for sharing Daniel! I'll have to check those out next time I go to HF! Thanks so much for sharing!

[@BrandonCabanillas]

What do you think about the Grizzly combo jointer /planer with helical head cutter.? It comes in 8 and 12 inches. The 8 inch is cheaper, but the 12 inch cost as much as the dewalt . For a novice like me with no workshop. My work area is the front or backyard, kitchen and living room.

[@FlynndoggWoodwork]

I don't have any experience with Grizzly but I have heard good things. I know they have a good customer support system which is great, so I'm guessing it would be worth a shot. Thanks so much for watching Brandon.

[@liquidrockaquatics3900]

1:23 the Amazon red ones are $12.93 instead of $32 for the orange. I generally find myself locking in referential measurements instead of actually using them as rulers.

[@FlynndoggWoodwork]

That's a great way to do it. I had not seen the amazon red ones. I'll have to give those a look. Thanks for sharing.

[@liquidrockaquatics3900]

@ I bought a set that was about $18 about a year and a half ago, and I’m not sure if these are the same brand or not. I use the shit out of my locking slide rules.

[@FlynndoggWoodwork]

@@liquidrockaquatics3900 Yep me too, they are great just to have a stop. Don't even really need the markings on them!

[@LuminairPrime]

11:08 OUCH that screech!

[@FlynndoggWoodwork]

Sorry About that! :). thanks for watching LuminairPrime!

[@LuminairPrime]

@@FlynndoggWoodwork Great video, lots of good stuff!!! Keep up the good work!!!

[@FlynndoggWoodwork]

@@LuminairPrime Thanks so much!

[@RayandSandysWoodworking]

I'm gonna have to watch the video again and decide what tools I need, not want. Lol 😂😂 Great video review on some very affordable tools. Thank you!

[@FlynndoggWoodwork]

My pleasure RayandSandy! Thanks so much as always for watching! Happy New Year!

[@RayandSandysWoodworking]

@FlynndoggWoodwork Happy New Year Bryan

[@LordHog]

Sir, don’t forget the all time best tool of them all, delegation. Hope your family and you had a great Christmas. Here is hoping your cuz will become just a bit more intelligent this coming year and not embarrass you as much

[@FlynndoggWoodwork]

Aint that the truth! I have a friend that says his pointer finger is is strongest tool. He just points where he wants work to be done by his minions! :)

[@The_Rowdy_One1]

Damn Dogg..... Your only half the man you were a few months ago... Congrats, you look great.

[@FlynndoggWoodwork]

Thanks so much Rowdy one! I've dropped about 80lbs. Hope to drop a few more :)

[@The_Rowdy_One1]

@@FlynndoggWoodwork !!!!!!! Quit giving it to me. Donate it to the Ethiopians some other needy group. I've already got more than enough. lol Seriously though, Good job. It is a real struggle after 50.

[@hansangb]

DAMMIT, you're gonna cost me money again...aren't you?? 😁

[@kenerickson4923]

@@hansangb he helps me spend money too

[@FlynndoggWoodwork]

Haha! This channel is a money pit for me! :). Thanks so much for watching Hansangb!

[@stellabelikiewicz1523]

Is that squirrel thing really true 😂? What charmingly creative little assholes!

[@FlynndoggWoodwork]

Oh yes, The squirrels in my shop are my enemies. We have lots of walnut trees in our yard thus I'm outnumbered! :)

[@natepeterson7145]

That bag on the Evolution saw lol

[@FlynndoggWoodwork]

I know right!? Squirrels and me have a constant battle in my barn! :)

[@kevincoughlin1023]

Hopefully you can make more great videos like these. Like the guy said it is a expensive channel to watch 😎👍🏻

[@FlynndoggWoodwork]

Thanks so much Kevin. You aren't lying. I enjoy checking out all these new tools but man, it's expensive! :). Thanks so much for watching!

[@AnaliseCarlina]

Thanks for sharing such valuable information! I have a quick question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How should I go about transferring them to Binance?

[@johnygoodman6659]

I need to find a cheaper version of the woodpecker mt center gauge

[@FlynndoggWoodwork]

Oh that would be a great tool to research. I'm going to add that to my list to look at this year. Thanks so much!

[@skippylippy547]

Merry Christmas 🎄 (uhm . . . you have squirrels in your shop? 🤪 )

[@FlynndoggWoodwork]

Merry Christmas to you as well. Don't even get me started about the squirells! :)

[@themeat5053]

Dogg man, how did we miss the NEITRA rulers? Did you do a "members only" video? You rat. Glad you mentioned that 64ths are not for woodworkers. Mr. Woodpecker and Festool says that this channel is all about more economical tools...WHAAAT? Glad to see you've come down to earth. This is a very good video and would be helpful to a hobbyist just getting started. You have really come a long way since the beginning; especially because you learned with KZbin rather than having a master carpenter teach you over time. This speaks to your ability to persevere and, to have a great cash reserve to be able to afford all this stuff. Hope the New Year brings you great health and happiness and many new tools.

[@FlynndoggWoodwork]

You are way too kind as always Meat! I really appreciate all of your comments and keeping me honest on every video. Really appreciate you more than you know! Happy new years to you as well! :)

[@themeat5053]

@@FlynndoggWoodwork Wish we had more money, we'd be members. But, we figure we can help with views and comments. All the best in the coming year.

[@FlynndoggWoodwork]

@@themeat5053 Hey, You deserve an honorary membership! I appreciate it views and comments are very important!

[@tatehogan5685]

"This drill is my primary drill for the last 3 months" yet you've only used the festool drill so far in this video lol. I appreciate the tool reviews though, keep on keeping on!

[@FlynndoggWoodwork]

Haha! Well, yeah, I guess you are right. If you watch my latest build with my cabinets, I used that black zero a lot. Not all the time, but most of the time. In general when I'm not on camera, I've been using it almost exclusively.... Really quite nice.. Not perfect but nice! Thanks so much for watching Tate!

[@Obtuse94]

It sounded like maybe you were censoring out the RS Tools clamp system?

[@FlynndoggWoodwork]

Hmmm. Not sure what you mean. The RS Tool Clamp Companion was in the video. Love the system!

[@ST-0311]

@@FlynndoggWoodwork The sound was horrible in that segment.

[@FlynndoggWoodwork]

@@ST-0311 Interesting, I'll have to check it out. wondering if that was because I used some old clips from previous video.

[@ebonicmaser]

Sometimes you could use a little more reach, the story of my life. 😅😅

[@FlynndoggWoodwork]

You and me both ebonicmaser! :). Thanks so much for watching!

[@shelleyeisele1022]

I subscribed to learn about tools and working--not junior high level jokes. Please respect your viewers-

[@FlynndoggWoodwork]

Sorry just having a little fun

[@rta3738]

Number One tool is your cousin and there’s no contest 😂

[@FlynndoggWoodwork]

I don't disagree with you rta3738! :)

[@flashcraft8287]

Good video, Flynndogg BUT get rid of that extremely annoying screaming character. It's so stupid. Thanks.

[@FlynndoggWoodwork]

Thanks for watching Flashcraft!

[@francischarboneau3793]

I wish you would lighten up on the sexual innuendos. I like to share these videos with my grandson's but trying to explain some of your innuendos is bothersome.

[@dnoel5787]

I like a good innuendo as much as the next guy. These are not good. They’re so forced. Just kind of grosses me out.

[@FlynndoggWoodwork]

Noted, thanks for watching!

[@FlynndoggWoodwork]

@@rickstetser8557 boo!

[@BillDiehl-bf2bf]

Couldn't watch past the 4th tool. Life's too short for lousy, unfunny jokes

[@FlynndoggWoodwork]

Sorry you feel that way, Life is too short to not have fun in my opinion.

[@jtadeog]

Very bad humor and incredibly tiring!!!

[@FlynndoggWoodwork]

Sorry you feel that way. Just trying to have a little fun!

[@joeberlin9964]

Great video

[@FlynndoggWoodwork]

Thanks so much Joe! I appreciate you watching!