Here's how to seal headlights, long form, step by step. This is Retrorubber (Amazon Link): amzn.to/33WfKeJ FOLLOW ME ON SOCIAL MEDIA IG: / flyryde FB: / flyryde Twitch: / flyrydechris
Пікірлер: 164
@jonathansandiford41373 жыл бұрын
Love this way better than shorts chris!
@flyryde3 жыл бұрын
Thank you my friend! Glad to be back to it!
@wusty23jd3 жыл бұрын
The longer, the better. Thanks for this video Chris. I need to reseal my headlights and I always enjoy learning new tips and tricks from you.
@xXSRS24Xx3 жыл бұрын
Here’s a video idea, you mentioned leaky headlights. Why not make a video on how you personally deal with leaky lights, such as steps on how to find a leak, how to repair a leak, different kinds of leaks ie standing water or fog or just droplets.. Or when it’s time to give up on a set that’s not fixable. Side note, this is the best tutorial I’ve seen on dealing lights. Love your vids!
@MP5A3SD Жыл бұрын
Hey Chris, I wanted to thank you a ton for making this video/sharing your knowledge! I've done a few sets of headlights over the years, and previously used silicone to reseal. I used this RetroRubber for the first time on my 370Z headlights, based on your recommendation from this video. Lets just say the headlights couldn't condensate if I wanted them to 🤣
@TailEndCustoms3 жыл бұрын
Yeah much better than the shorts. I don’t even mess with lights but always enjoy watching your vids. 👍🏼
@flyryde3 жыл бұрын
I appreciate that!
@TailEndCustoms3 жыл бұрын
@@flyryde no prob. Keep up the good work.
@RauhdySS3 жыл бұрын
I watched the whole thing! I just picked up my e60 550i and will be separating my first set of lenses. I’ll be wearing my FlyRyde hoodie hoping to transfer some of your Jedi headlight upgrading powers. Wish me luck.
@mikehunt8968 Жыл бұрын
Excellent, I've just taken apart an Audi TT headlight and was wondering what to use to reassemble it👍
@Kyrios23893 ай бұрын
Thanks a lot for the videos, man. I will have to reseal my headlights son, so I watched a lot of times the video about opening them, and this just became the cerry on top. Maybe I'd start a little business here because no one offers thins kind of service here in Chile. Thanks again and have a great day, mate!
@Blackdragon0102 жыл бұрын
220F is 104.4C for those who don't measure in freedom units
@MatthewN8OHU3 жыл бұрын
"I watched the whole thing". Educational as always, Chris. Thanks
@umangu3 жыл бұрын
Dude I watched the whole thing! I really wanna see a video of you using a hot melt gun or machine to seal up headlights. I need to seal up old school 7” glass sealed beams and there is no way I can use rolls of butyl. Really interested in: 1. The best machine to use 2. Whether I can use a hand held gun 3. Whether I need to find butyl glue sticks or can use ‘bricks’ of glue 4. The thickness of the melted glue and how fast it flows and how easy it is to control Thanks Chris!!
@UthmanKhel3 жыл бұрын
The long videos are better gives me confidence to do this to my lights
@boomhauer12343 жыл бұрын
I watch the complete video, much better than the short videos. I love all of the details that you have added.
@alexrezansoff588 Жыл бұрын
I don't know if this guy is making videos anymore, but follow his advice. I just retrofitted some HIDs into my mustang because I couldn't see shit at night and his content really helped me figure out the process as I had never done a project like that before. One piece of advice I have for anyone attempting this is DONT USE PINE 2x4s in the oven. They get hot and leak sap out and them you have to scrub it out. Ask me how I know lol. It does make your kitchen smell really nice tho
@Donny_Bo_Danglez3 жыл бұрын
Watched the whole thing! I’d love to see more videos sealing taillights that were cut open
@JG0en1872 жыл бұрын
Watched the whole thing. Greatjob especially the finishing work of smoothing haven't seen anyone do that before.
@MrClunk9993 жыл бұрын
Longer videos are definitely better for me, but i thing everyone learns in different ways! just keep doing what your doing, because your doing great :-)
@BIGH05S3 жыл бұрын
You should go over sealing wires coming out of a housing. Like halo wires if u don't have rubber boots on your factory lights.
@frankblea5352 Жыл бұрын
I watched the whole thing ! I am planning on customizing my headlights soon. I am starting small with my fog lights now
@jorgealves2303 жыл бұрын
Ballasts get hot as fire too. Is it a waste of time that I clean all the old butle out of the channel before putting new in?
@jeremygyles34923 жыл бұрын
Love the longer videos. I watched the whole thing.
@Ben_Z333 жыл бұрын
Thank you for this exact video. I got an Set of R35 GTR headlights coming in for an reseal. I know the earlier models have an common problem where they tend to leak.
@dynamiclightingllc3 жыл бұрын
So the way I do my process Chris is I put the rubber in cold. Run it along the channel. Heat it up with a heat gun. The I get a old flat head Screwdriver and smooth it out and push it in the channel if I have to. Install the lense and heat up in the oven after and clamp it down
@Patrick94GSR2 жыл бұрын
I’m confused. If I put the headlight in a preheated oven, the headlight heats up. If I put it in a cold oven and turn on the oven to 220, both the oven and headlight heat up together. Seems like it would actually be less thermal shock to heat both oven and light together. I just opened up my headlights that way the other day, heating them up from a cold oven, had no issues.
@bbefox07 ай бұрын
I think the purpose of preheating is because you can precisely time to his recommended 7mins, since there are so many different kinds of ovens that may take different amount of times to heat to the desired temp, the consistency may be different at different times/temps, so by preheating (anything, not just headlights, like pizzas), you're ensuring consistent heating for a specific amount of time (maybe some ovens it can take 1min to ramp up to temp and others 5 mins or 10mins)
@WanderingFriar2 жыл бұрын
I did watch the whole video and wish there was a service just for headlights in the UK. I will have to tackle this myself but this video guide is invaluable. Thank you!
@MrTredd222 Жыл бұрын
Dude, I literally watched the whole thing. It was actually therapeutic to see the process and see and hear about the little "what if" scenarios happening while doing it... also, the solid advice for why ppl shouldn't cheap out and rush through it...(bc you already there will be those ppl..lol) love it bro! Keep up the good work!
@chrismic48352 жыл бұрын
Might be a silly question but how come we can heat headlights up to open them and not do the same with tail lights? Everywhere I look, you are instructed to cut the tail lights open. TY
@DL101caАй бұрын
Taillights are sonically welded, so no glue to melt. They need to be mechanically separated by cutting the housing or the lense open.
@unforgiven101inc Жыл бұрын
Thank you for your time, I watched the whole thing and learned a lot...
@08pileggi2 жыл бұрын
Watched to the end and learned a few things, definitely what I was after 🤙🏽🤙🏽
@car-nella89052 жыл бұрын
I watched the whole thing! I loved it, you were entertaining and you know your stuff!
@shevaughngolding4903 жыл бұрын
Hey am from Jamaica and I have my headlight to seal back up again, the first time I did use Eurotain
@veralucia126562 жыл бұрын
GREAT video. The more detailed the better! Thanks!
@colombianodny7 ай бұрын
What about if you don’t have an oven? Kitchen oven works also? Would I damage the kitchen oven with the lamps?
@Carlitosway2119 ай бұрын
What kind of oven is that? I've been thinking about offering a reseal service to my customers since new lights on many vehicles are over a grand. I can make plenty of GP and save them a ton of coin.
@bruceaugustine64868 ай бұрын
I watched the whole thing have you tried a product called, The right stuff? How did it work for you?
@juanespada168111 ай бұрын
Watched the full video. Very informative. Thank you.
@nicholasbrunick89214 ай бұрын
I watched the whole thing. I have a big question for you. I bought some custom headlights from this company call CW customs and I think they did a terrible job sealing it. As well as I don’t trust this guy or his craftsmanship so it makes me hesitate on paying to have the headlights installed just for them to shit out on me. Would it be possible to send them to you to look it over?
@williamp627110 ай бұрын
I watched the whole video because I’m about to reseal mine. The soapy hands to work with the sealant was a great idea. Do you always place the sealant on the outer edge. Or you only do that for certain headlights like the GTR?
@cfmcskog3 жыл бұрын
Very informative and I definitely watched the entire video, thanks for the advice.
@leemaicol8746Ай бұрын
Hey Christ, thanks for your videos. I'm thinking of changing the angel lights on my 2015 BMW X5 F-15 and based on your experience, what problems might I face? Any advice would be appreciated. Thanks
@justrandom775223 күн бұрын
How much do you charge to swap lenses for both lights bro? What’s the average cost? I don’t have an oven I have a heat gun but idk if that’s enough
@braddubois6836 Жыл бұрын
Detailed videos, just like this one is perfect, since your wondering. That’s my opinion..
@Gorilla_Jones5 ай бұрын
This video is amazing. Why don't you make new videos? :(
@robertfolgersr6280 Жыл бұрын
Do you do this for other people? I can send you my unit from my Solstice GXP?
@ro63rto Жыл бұрын
Have you ever opened up a set of Audi TTs mk2 xenon headlights?
@DriveWithAndy6 ай бұрын
Advice needed. My custom headlights keep missing up bad. 3 times now I have taken them off, heated up and with a vacume cleaner inserted to suck out the moisture. Yet they still mist up badly. I can't see any holes or damage that's letting water in either. What do you suggest? I did think what about blasting them in an oven on a low temp to hopefully get them bone dry? But what temperature and time
@DL101caАй бұрын
Your sealing isn't done properly or the vents are plugged. Headlight have vents to allow moisture/air to escape while the inside heats up and expands. They're not completely sealed as you would think.
@flubyux23 жыл бұрын
So, Quick clamps and not the rubber surgical tubing?
@joshuamarko873 жыл бұрын
awesome vid man I watched the whole video love these better then your shorts :)
@georgetufenll96633 жыл бұрын
I watched the whole thing.. I much prefer these to the shorts.
@johngreer9124 Жыл бұрын
Love the video Thanks. Do you know of a suppier for head light lenses? I've got a 2014 Acura MDX and need a new lens. THanks again for great content.
@gregorymckannan3 жыл бұрын
I watched it all. Pretty helpful stuff!
@alejandrowatson2173 Жыл бұрын
Have you done a 2012 Acura Tl headlights?
@keithroberts5611 Жыл бұрын
In all my years of driving 55years and owning 60cars i have never come across a lens that needed tobe resealed ever!!! And the chances of this ever happening must run into millions 2 one!!!🤔🤪
@keith38able6 ай бұрын
They need resealing after removal of lens for modification or they WILL leak.
@greenrogue073 жыл бұрын
Hey, loved seeing the whole process of sealing the headlights. I might have missed it, but did you add the screws to the headlight at 19:15 or the headlight came like that. Might be a stupid question, but mine had only butyl tape, no screws on the outisde.
@Giorgimm112 жыл бұрын
Most of the headlights I have seen come with screws.
@PeterPiccolo3 жыл бұрын
id love to team up and make a set of customized headlights and tailight s for my 09 prius to make it something special... or where could i get some of those electronics so i can diy? thanks a ton, -peter joseph
@fablighting78843 жыл бұрын
I watched the hold thing 👍👍💚💚💚great refresher💚💚💯
@seeharvester8 ай бұрын
I just bought a set of Mopar OEM headlights for my 2011 truck and I want to make DAMN sure they never leak like the originals did (after about 8 years). Can I apply that retro rubber without taking them apart and without putting them in the oven? Or is there a butyl rubber caulk that I can just run a bead around the edge for extra protection?
@DL101caАй бұрын
No point in fixing what ain't broken...and to do it properly, the old glue must be replaced with butyl, so baking is a necessary evil.
@seeharvesterАй бұрын
@@DL101ca Too late. I put clear silicone all the way around the edge.
@shorty4g63147 ай бұрын
Would u recommend this for tail lights that are heat welded, tail lights you have to use a dremel to cut open. This seems easier to work with than J-B weld.
@DL101caАй бұрын
No, this could be used in conjunction with jbweld as alone it doesn't offer the structural integrity to hold the lense in place without a mechanical fastener(channels and clips in headlights) . JB weld is the way to go, maybe use in few places to hold taillights together then seal the rest with butyl if you feel you can't do jbweld all the way.
@shorty4g6314Ай бұрын
@@DL101ca got it, thanks!
@mickdavies97253 жыл бұрын
"I watched the whole thing"
@flyryde3 жыл бұрын
hell yeah! Learn anything new?
@mickdavies97253 жыл бұрын
@@flyryde I have watched you do this process before on another video, but I have to watch to the end so I don't miss something lol.It always amazes me that you can put them in the oven without them becoming damaged. your content is always informative and really interesting to watch, keep up the good work. plus I love the longer videos, we get to learn more of your trade secrets lol.
@tangarifelopez Жыл бұрын
How long ur supposed to leave the butyl in the oven for?.
@DL101caАй бұрын
Till it's golden brown...
@gecko1406 Жыл бұрын
Hey question Is Diode Dynamics headlight butyl also good? 🙏
@tigger1269 ай бұрын
Cover to cover. Thanks!
@nikolapanic3855 Жыл бұрын
Hom much mm Rubber? Thanks
@Reallypeople10002 жыл бұрын
Hey, I am just trying to redo the reflective surface of the headlight bowl. I have an old 1995 Sidekick that water got in and (water/moister...you get it) it oxidized, so the headlights are non existent when they are on! Is there a paint that I can use to restore them or do I need to send them off somewhere to have it repaired?
@DL101caАй бұрын
There are shops that could rechrome them, but why not stick some projectors in there and have proper lighting where you need it ?
@marcofiore1683 Жыл бұрын
Very interesting and informative good watch
@MePeterNicholls Жыл бұрын
Do you take out the bulbs before going in oven?
@MePeterNicholls Жыл бұрын
Ok you answered. Lol
@terryfritz80353 жыл бұрын
I watched the whole thing! Can I just send you my lights! Ha Ha 2020 GT350 Switchback LED DRL's and Demon Eyes
@RideVibeSocietyАй бұрын
will you do mines for me?
@marcwonnacott32864 ай бұрын
Very good Video thanks.
@KenobiJediMaster3 жыл бұрын
Страхотна работа. Браво. Благодаря.
@JonpaulWhitehead3 жыл бұрын
I watched the whole thing and Def prefer the more in depth and raw style videos.
@JoeyTorres-g9g2 ай бұрын
Bro your vids help me out a lot as me starting in lil business I was looking for vids on how to and u got them all from point A to point B thks bro 🫡
@CrAzYTC93 жыл бұрын
I watched the whole thing!!
@ahmedal-hadi39003 жыл бұрын
Love the vid, of course I watched and liked it
@michellemay74610 ай бұрын
Watch all off it ty
@my-max-media7621 Жыл бұрын
PPE = Personal Protection Equipment 🤣🤣🤣
@julianbreakseverything63973 жыл бұрын
Whats that packet inside?
@gixxerjay793 жыл бұрын
Silica gel to manage humidity
@PaulPaid3 жыл бұрын
@@gixxerjay79 Is that factory?
@flyryde3 жыл бұрын
Yeah, on these lights they are built in. Very common with factory Xenon / LED
@julianbreakseverything63973 жыл бұрын
@@flyryde do they come stock on dodge chargers? Ive seen some inside a prebuilt oem set someone built and thought they added it
@bigcountryboy Жыл бұрын
Like long video and can you do 2015 Nissan Altima headlights
@DL101caАй бұрын
You drug dealer son ?😂
@killerpenguin660zzz2 жыл бұрын
Great video!
@gregoryhicks68703 жыл бұрын
I watched the whole thing
@3103Juan3 жыл бұрын
Great Content
@jamest.50012 жыл бұрын
Super glue 👍 😆
@katdeville Жыл бұрын
No. It fogs the plastic and won't be evenly dispersed. And unless you use a slow-set gel, it will dry before you get glue all the way around.
@ronanquigley37999 ай бұрын
Can I put headlights in a normal oven rather than one like that? Or is it going to leave fumes that will poison my food and kill my family? 💀
@DL101caАй бұрын
Just put some BBQ sauce on the lense, yum...
@brianlow72353 жыл бұрын
I use zebra bubble gum and now I don't have headlight lense.
@thomas_Customz2 жыл бұрын
I watched the whole entire video 2 times
@masoudmontazery907 Жыл бұрын
Good luck...
@BruceLee-xp5fc11 ай бұрын
Naw I like long form
@BruceLee-xp5fc11 ай бұрын
That’s what she said
@itglows69XB3 жыл бұрын
I watched the whole thing, Chris. GREAT, informative video with lil nuggets of info that most people don't know!! Thank you for sharing and teaching us!!
@braddubois6836 Жыл бұрын
Detailed videos, just like this one is perfect, since your wondering. That’s my opinion..
@trllr63 жыл бұрын
Much better then the shorts! Lots of info and detail. Keep up the good work Chris!
@flyryde3 жыл бұрын
Thanks! Will do!
@jackmarsh73283 жыл бұрын
Can I use heat gun instead of oven to apply the seal and opening the lens
@omidsh3668Ай бұрын
Привет мой друг .. спасибо за твое видео 🙏 сделал то же самое со своей Маздой, но вот проблема после установки 😢 пар идет на свет, хотя он 100р приклеен плотно и 2 канала вентиляции работают отлично, как вы думаете, что это может будь 🌹🙏 🙏
@Sckloste3 жыл бұрын
I watched the whole thing and thank you for putting in the time to show how this is properly done!
@DEViLz19763 жыл бұрын
"I watched the all thing" 😃, always great to learn, thank you.
@angelesworld38558 ай бұрын
How about DNA test? Dr Zakir is himself a doctor, right
@morrellcynthiaАй бұрын
I watched the whole thing that is good retro rubber not retro glue
@davidmorgan23535 ай бұрын
Should the old sealant be removed if your adding new?
@ThePumaboii6 ай бұрын
Question. What are preheating procedures for the rubber?
@djredx2462 Жыл бұрын
Funny I’m from Jamaica and I want to know the same thing
@iLoveBoysandBerries3 ай бұрын
In Dubai on a normal summer day the temps in a parked car will exceed 200 degrees. When running, the headlights will reach temps over 400 degrees and that's totally fine
@DL101caАй бұрын
They never reach even close to 400 outside the projector or the reflector housing near the bulb.