Flysky fsi6 3-mode switch setup | Flight Modes setup in mission planner [Altitude hold,RTL,flip]

#FlightModes#3positionswitch#fsi6transmittersetup
APM 2.8 Quadcopter building tutorial : • Quadcopter drone with ...
KK 2.1.5 Quadcopter building tutorial : • Quadcopter drone with ...
Follow us on Instagram :
/ tech_at_home
Like us on Facebook :
/ tech-at-home-220885266...
Thanks for watching!
Like Share and Subscribe
#techathome#apmdrone#quadcoptertutorial#flightmodessetup#ardupilotsetup#arducoptorflightmodes#altitudehold#loiter

[@Saffron_SV]

Can we use Bidirectional ESC for quad copter? Do we required any additional setting or something for that?

[@George25]

G’day mate ! I have some technical issues with my Flysky FS I6x , I can’t connected to my orange cube + flight controller using Mission Plannee to do the radio calibration, any words of wisdom you can help me with please ?

[@mattwedgwood1513]

This helped me setup flight modes on my FS-i6, thank you!

[@techathome]

Welcome

[@Saffron_SV]

Can we set on/off switch with one switch for other toggle switch in FS-i6x, Like if set 'SWD' in Up position then 'SWA' gives 0 signal (or do not set to anything if we toggle it up or down) but if we toggle 'SWD' down then 'SWA' Gives the signal (if its up then 1000 and if down 2000) as normal as it should??

[@dgb5820]

I love you for ever, I have been here for days and just found your video and it worked. Australia thanks you 😀

[@techathome]

Welcome

[@stanleyportion5628]

Very useful tutorial for a beginner like me, God bless you.

[@_do__d0]

Bro which channel is used to fly mode in transmitter

[@techathome]

5 and 6

[@RamKethar]

Thanks for the proper explanation bruh and for people who just think three modes are enough ...do the first step change the aux channel and skip mix continue with channel 5 end points i am not sure if you even need that....and bro how can i contact you i need some help with my hexacopter

[@Mebrown_NoBot]

Thanks, man,,, I was rigorous searching for such tutorials...

[@biyasray8192]

Kindly tell if I wish to use only channel 5 for flights mode ,I mean only 3 modes ,so what will be the pwm and I set up this?

[@ankitpandey8435]

Thanx fr this but do you now how o reset remote all settings, if you want to do all settings again...

[@techathome]

Use switch C and Switch D

[@_aesthetic_vibes]

Sir i have a question when I arrem the motar it spin fast on throttle 10 % it's spin very fast how to slow down speed in apm 2.8

[@sweetcollegegirl960]

Bro thanks for this video iam searching for this video

[@fakherfaroooq6953]

Bro how i move second column value of endpoints? What button you pressed?

[@techathome]

Use the switches C and D.

[@vvishal7988]

What flight mode are you using during takeoff and during takeoff from hand?

[@techathome]

Stabilize

[@vvishal7988]

@@techathome sir but during stablize mode..drone takeoff faster and wont hold altitude right but how is this possible

[@vvishal7988]

@@techathome should we switch mode immediately after takeoff

[@techathome]

Yes once it takes off, put it to altitude mode. But drone should be at some height

[@Likithchoudhary]

Bro I have a question we can keep 30a ESC to 1000kv , 1400kv, 2200kv bldc motor or we have to change ESC while changing motor of ****kv

[@techathome]

You can use 30a

[@nature-life4149]

Long press cancel button to save.......🙏 Thanks....i did not know that....

[@mahad2435]

If I arm The automatic motor rotate Even if the throttle is not increased?

[@techathome]

Yes, they will start to rotate slowly, That is no issues,

[@mahad2435]

@@techathome If I increase it a little, it becomes high speed?

[@_do__d0]

Setup it up with throttle curve move mode on transmitter ,I have also the same problem,now I adjusted it

[@acharisimhadri2806]

Hi sir, i am using fs i6x transmitter, should i follow the same procedure?

[@techathome]

Same only

[@beefybeef1326]

This is an excellent tutorial- thank you very much. Your videos are very well made and clear. Brilliant!

[@akshaykadam1724]

Hello.. what is current 'pwm value' below the current mode? What the values supposed to be there? In my pc 1100 for stabilize.

[@techathome]

Those values will vary, don't worry, just check whether flight modes are changing when you toggle the switch

[@akshaykadam1724]

@@techathome thank you👍

[@juniosilvadearaujo8487]

Hello my friend saw in your video that you managed to configure your apm 2.8, I'm here trying to configure mine, and I need your help.

[@techathome]

Yes

[@juniosilvadearaujo8487]

My drone couldn't climb stabilized, it always falls to the side, can you help me with this?

[@samirpatel5738]

As soon as I on transmitter arducopter is been disconnected and not Abel to calibrate radio controllers what to do?

[@muheedahamed9999]

Thank u for this video...

[@techathome]

Welcome

[@crjdreams1991]

Can you suggest 6 flight modes for a drone without gps.

[@techathome]

I think you need GPS module for flight modes

[@knplsrinagar6072]

Can i make bicopter using APM 2.8

[@techathome]

Yes

[@knplsrinagar6072]

Can you make video for bicopter using apm 2.8

[@shaan29888]

Thanks for your video

[@aadhithyabelkishridhara5075]

hi pls make video in how to set up switch mode in flysky th9x pls help

[@techathome]

Is it not same as Fs-i6??

[@aadhithyabelkishridhara5075]

@@techathome no bro its different i am not able to do it it is possible but you cannot change the whole channel 5 to 3 mode switch pls make a related video pls help

[@ahmedabdelaal4155]

Can u do same but for flysky fs-i6s transmitter? Thanks 😊

[@techathome]

Sorry I don't have that transmitter. I guess the buttons are different,

[@ahmedabdelaal4155]

​@@techathome because in Mix#1 not possible master ch5 and slave ch5 as well

[@denisfranck999]

HELLO SHOW ME HOW YOU PROGRAM A HELICOPTER ON THE MINI PIX M8N RADIOLINK

[@crjdreams1991]

Drone slips at one side during take off. What may be the reason?

[@techathome]

kzbin.info/www/bejne/hl6rk4mVmZyXf7c Once try this procedure.

[@abirbirdsnew]

Good very helpful

[@abipaily228]

Long press ok button to access settings i didnt know that

[@juniosilvadearaujo8487]

When I turn the key on the radio, it doesn't change in the mission planer, and the gps is in Land mode in flight mode 4, help me there.

[@techathome]

Have you assigned channel 5 and channel 6 to switches C and D (in my transmitter, we have done inside AUX channels)

[@nicholasn.2883]

Thank you!

[@myanmarmedia3396]

hello Please i need help how to set transmitter

[@techathome]

Yes

[@chiragm1439]

Bro I'm not able to change the flight modes with my transmitter switches please suggest some solutions

[@chiragm1439]

Please reply bro

[@techathome]

Have you followed All steps as in Video? Have you connected channel 5 and 6 to APM board?

[@chiragm1439]

@@techathome yes bro

[@chiragm1439]

@@techathome in the 6th ch I'm able to change only 60% but in the right side I'm not able to change it into 76%

[@techathome]

Use that switch C and D to move the arrow

[@pervez9834]

you are giving values to the channels but no explanation why?

[@crjdreams1991]

What is the use of Switch A and B?

[@techathome]

Same as Switch C and D, you have to assign to channel 5 and 6, according to your requirements.

[@nixonjames1840]

When i arm the drone it automatically rotates without moving the throttle

[@techathome]

No problem with that, in my drone also same thing

[@shaan29888]

Bro mera Drone staybal flying nahi ho raha hai throttle up karna sa drone right side flying karta hai please help me

[@techathome]

Try this : kzbin.info/www/bejne/hl6rk4mVmZyXf7c

[@Kler_Kongo]

gracias por explicar

[@techathome]

Welcome

[@denisfranck999]

BONJOUR MONTRE MOI COMMENT TU PROGRAMME UN HELICOPTERE SUR LE MINI PIX M8N RADIOLINK

[@abipaily228]

My throttle down bring the drone down really fast how can i make it come down slowly ?

[@techathome]

It is same for me. I control manually. Try editing in Throttle curve of transmitter, set according to your requirements.

[@abipaily228]

@@techathome yes it lands really hard , i have to then give a little power to bring it up to avoid landing hard on ground. i will try throttle curve

[@techathome]

Ok

[@abipaily228]

@@techathome i think because its in stabilize mode, in loiter or pos hold mode the descend should be controlled by barometer pre defined rate so it will come down slowly

[@abulhasan.a.k.9873]

3:21 how to move arrow mark to second row

[@techathome]

Use Switches C and D

[@SEMICONBRICK]

thx alot

[@techathome]

Welcome

[@saralapati6791]

How to go to end points second values???

[@techathome]

Use the switches C and D

[@skyridersrc3644]

Great

[@nandeshbabu469]

How to arm through controller bro??

[@techathome]

Keep the throttle stick to minimum position and move towards right, Watch this : kzbin.info/www/bejne/bl6WemWOpNlmpqs

[@jena2379]

i want to make a drone using ardupilot but im not having $$$

[@S.M.A99]

Vi please mujha ak 11.1v 3s 5200mah lipo battery ka link do please. Indian website ka please vi please.

[@shaan29888]

robu.in/product/orange-5200mah-3s-40c80c-lithium-polymer-battery-pack-lipo/

[@mrd2736]

Not selecting chanel 5 first

[@shivufpv6248]

Nice

[@lokeshkanakala5026]

How to arm and disarm..???

[@techathome]

Arming, Throttle Stick ( down+ right ) - hold for few seconds. Disarming, throttle stick (down+left) - hold for few seconds

[@lokeshkanakala5026]

@@techathome it’s not working...

[@techathome]

Have you done RC calibration

[@chandra.s]

How do this in fs i6s

[@techathome]

I have not used that, i think that doesn't come with these buttons, may be navigation way is different, But values will remain same

[@chandra.s]

@@techathome ok

[@BiswajitBag-ur2em]

Lotre not working

[@S.M.A99]

I cant install mission planner in my pc😭😭😭😭😭. Please give me mission planner link🙏🙏

[@techathome]

ardupilot.org/planner/docs/mission-planner-installation.html

[@S.M.A99]

@@techathome thank you so much 🙏

[@deysbro]

sir aapse contact karna ke mujhe pls email id dijiye usme contact karke aapka whatsapp number lena he // aapka channel promote karna he and drone banane me kuch aapse jankari leni he drone ke liye pagal hu .bahoot saare drones he mere pass .

[@Crazyboy.55535]

My drone is not arming .....

[@techathome]

Do the sticks calibertion once again properly and check

[@Crazyboy.55535]

@@techathome how can you explain .....plz

[@somenathsamanta_8743]

It not wotking with my fs i6

[@techathome]

Have you assigned AUX channels to switch C and D

[@landscaper1433]

@@techathome there are only vrA , vrB and none, i cant see swA and swB.