Flysky G7P auxiliary channel 3 - 7 setup guide.

Welcome back to Wtf Rc Cars,
Flysky 9 auxiliary channel 3 - 7 setup guide.
FlySky FS-G7P 2.4GHz 7CH ANT Protocol Radio Transmitter PWM/PPM/i-BUS/S.BUS Output with FS-R7P £56.37
www.banggood.c...

[@2blackfox1]

Finally!!! Someone who actually knows what they are talking about with this controller and a video to match! Thank you WTF RC! Now I can configure my G7P the way I need it. Now I get it. Thank you.

[@WTFRCCars]

Glad ya like the vid :)

[@paulhiggins5266]

You gave me the answer I was looking for around dual servo steering! Think I’ll get one of these now Great informative video, thank you 😊

[@WTFRCCars]

Glad it helped :)

[@ArtietheArchon]

returned my dumbo and bought a flysky for this degree of customization, some things are simply crucial for a nitro car

[@WTFRCCars]

Yep definitely

[@s0lidjesus885]

Thank you for the guide! This helped a ton.

[@WTFRCCars]

Glad ya like it :)

[@steverowe8785]

Thanks for all these helpful videos. When showing the servo functions it is hard to see the movement without a servo arm attached.

[@WTFRCCars]

Yeh I try to fit an arm when I have them kicking around :)

[@steverowe8785]

@@WTFRCCars Thank you and keep up the good work.

[@evintacy7272]

Thank you so much your video helped me out a ton!!! ❤thank you sir

[@WTFRCCars]

Glad ya like it :)

[@evintacy7272]

@@WTFRCCars yes sir I needed the help haha! I love that fly sky gp7, I have 4 different fly sky remotes! But this one and gt5 think love them! This lets me do things others won’t! Needed get my winch on 3 position switch ! After your video I’ll put it on tr1 think 🤔 maybe 20 percent ,,,so speed winch up as needed! Thanks tons sir!

[@wtfmimshag]

Man i really wish you could display the BVD voltage on the main screen instead of the massive timer, given the main rx they're selling at the moment supports BVD. But that's off topic. Great pickup using the trim switch @ 100 steps to give another 3pos switch. SW3 is in kind of a weird spot and a bit fiddly

[@WTFRCCars]

Yeh works well an yeh would rather be able to switch out the timer on the display :)

[@francoisdesmarquis8548]

I was thinking the same

[@nicksantitoro]

Do you know how to setup a mix for an rc tank with this radio?

[@czechu01]

Do you think it's possible to control a servo winch with this radio? Ideally 3 position switch or a knob (both directions working continuously until switched to zero position)? I didn't find any information about setting up aux channel that way. I know spektrum dx5 can be set up like that but that's out of my budget I'm afraid 😞

[@WTFRCCars]

Yeh it has a 3 position switch, but the continued rotation is done by the servo not the transmitter so you have to either run a true servo winch or run a winch controller from the Rx to the winch servo :) it works that way will all transmitters :)

[@matthewhaynes7375]

Will this work with the 3 channel receivers also? For the 3 channel version

[@WTFRCCars]

As far as I know there are no 3 channel receivers for the G7P

[@El_Twin]

Can channels 3-7 control an led light/bar?

[@WTFRCCars]

Yes any of them can :)

[@arnoldtm31]

Hi, I am trying to set my light kit to turn on and off using switch 1. I have plugged the kit into channel 3 on the receiver and assigned switch 1 but it stays on all the time.

[@WTFRCCars]

Do you have a channel switch connected to ch3 and then you lights connected to that as you will need a switch not just lights

[@arnoldtm31]

@@WTFRCCars there is a controller box connected to channel 3 on the receiver through a servo cable. The lights are connected to the control box.

[@WTFRCCars]

What's the exact control box you have so I can advise you better :)

[@arnoldtm31]

@WTF RC Cars It is a generic ebay unit. Blue box with white micro connectors on leds. Thanks for the reply. I have ordered a killerbody kit. Will try it with that one when it comes in.

[@WTFRCCars]

If you like come join the wtfrccars Facebook group and it's easier to post pics of exactly what you have may be better for me to help you in there :)

[@paulhiggins5266]

Is the Flysky G7P the same as the Absima CR7P?

[@WTFRCCars]

Same radio but the g7p has more features as it run flyskys own firmware with the absima one you are limited to features absima want to have :) both are made by flysky but as far as I know you can't install the flysky firmware on the absima radio

[@paulhiggins5266]

@@WTFRCCars do you know if the Absima one has all the same 4 wheel steering options as the flysky?

[@WTFRCCars]

@paulhiggins5266 no sorry I don't have one you would be best to download the manual for the absima one :)

[@paulhiggins5266]

@@WTFRCCars good shout

[@SpeedPill]

can this transmitter use for drift rc??

[@WTFRCCars]

Yes they do a gyro receiver too so no need for external gyro

[@SpeedPill]

@@WTFRCCars cause I have a external one that is why I'm unsure how to do if I have one

[@SpeedPill]

@@WTFRCCars is it possible to do a video for external gyro connection to this transmitter

[@WTFRCCars]

@xxbombhitxx2614 if you want to run external just works like any other radio set up