Flysky NB4 and Noble Pro, VRC Pro setup guide. 2/3/22

[@lektro808]

I don’t even have my NB4 yet or VRC pro and enjoyed the video. Thanks for all your detailed videos! Much appreciated.

[@WTFRCCars]

Glad ya like it :)

[@3props_does666]

Great info here Sir. I appreciate all the help earlier today 👍

[@WTFRCCars]

No probs happy to help:)

[@Ittybittythetwofacedkitty]

Thanks again for all your helpful videos

[@WTFRCCars]

Thanks 👍

[@alpenjon]

Very useful thanks

[@WTFRCCars]

Glad ya like it :)

[@mitch858]

Hi WTF RC CARS, how exactly did you prompt VRC to map the Joy04 button on the noble to "turn marshall" when ever i click on it it binds to my mouse.

[@WTFRCCars]

1st you have to have a button bound to ch3 and ch4 from what I remember then just select it and press the button you might not even have to have a button bound to the channels in the newer firmware :)

[@joehernandez3132]

Hi great video. Do know if radio can be setup on the steam version of vrc-pro? Thanks.

[@WTFRCCars]

Yeh the pc just sees it as a controller so you can even play Forza Motorsport with it :)

[@Larfinkle]

I'm a little late to the VRC party.. 😊 Ive downloaded VRC but when opening the program about 1.5 gigs worth of updates. 😢

[@WTFRCCars]

Yeh there's been a lot of updates over the years

[@Larfinkle]

@@WTFRCCars I just figured they would download the latest version with the updates? I'm a novice when it comes to this stuff so what do I know. 😁

[@WTFRCCars]

It would make sense but most games and software do the updates after the original install

[@eeatsvaz]

Great explanation video. Is there a way to connect wirelessly to pc?

[@WTFRCCars]

Yes but it's a pain as you need a usb converter that allows you to connect a receiver to the pc, it then takes the channel output of the receiver and changes them to usb inputs but you also have to power the receiver

[@eeatsvaz]

@@WTFRCCars Thanks

[@WTFRCCars]

No worries

[@runnerbaba]

Hello Sir. Is it possible with Nb4/Nb4 Pro to control 2 recievers at the same time? Reciever 1 for the Crawler, Reciever 2 would be in the trailer for some functions there with a separat battery and esc. Thanks

[@WTFRCCars]

Yes on both you can bind one as master and other as slave :)

[@runnerbaba]

@@WTFRCCars Thank you. What would the channel limit on the NB4 be on master and slave? 2x 4 channel oder 2x8channel ?

[@WTFRCCars]

The maximum amount of assignable channels is 8ch

[@jundelfintvhobby]

Hello sir may I ask if there is a vrc pro for radiomaster MT12 tx?

[@WTFRCCars]

Vrc pro works with any transmitter that can connect to the pc or you can use a usb to receiver adapter and any transmitter

[@jundelfintvhobby]

@@WTFRCCars thank you so much sir very appreciate for your info👍🏼❤️

[@ChaosRC666]

My vrc (or my PC) will only work with the nb4 (Firmware .100) . Not with the pro... Did everything like you said in the video...

[@WTFRCCars]

Strange one mine works fine, does you pc see the pro at all in control panel under Windows controller settings?

[@ChaosRC666]

@@WTFRCCars yeah... It pops up but I don't get the calibration (test) page when I hit properties like you do. It's the same like with nb4. Tried different cables... And it works with the mb4

[@ChaosRC666]

@@WTFRCCars I tried again this morning... Now my PC gets the pro. And i also get the calibration test page with the nb4. But still vrc only recognized the nb4, not the pro. Sent you a video in messenger.

[@WTFRCCars]

Yeh you need to set the pro as the default windows controller, then open vrc as it's a very old program it need the control set as default before it shows up the 1st fine :)

[@ChaosRC666]

@@WTFRCCars i did that... Oh well... I guess I'm stuck to use the nb4 then...

[@photoman5943]

does this work with Macs?

[@WTFRCCars]

I don't think there's a version of vrc for Mac, the nb4 and pro should both work as usb controller though

[@kristofferdelrosario1105]

hi there, are you able to set the force marshal and back to pit in the regular nb4? it keeps on assigning to Z axis

[@WTFRCCars]

Yep bind 2 buttons one to ch3 and one to ch4 then go into the menu in vrc and assign the buttons to the action you want :)

[@kristofferdelrosario1105]

@@WTFRCCars ohh thanks! you were right about the ch3 and ch4 pre assigned buttons. i unset them so they will show 0% and I was able to assign them! thanks alot!

[@WTFRCCars]

Happy to help :)

[@1521joe]

Hi, do the recievers have gyro? Thanks

[@WTFRCCars]

For the nb4 and pro use the INR4-GYB receiver to have full stability control over throttle and steering :) I have vids on it in the receivers playlist for both pro and nb4 :)

[@1521joe]

@@WTFRCCars excellent thanks.