NEW FIRMWARE - Pilot the Mini 3 Pro and Mavic 3 with Goggles and Motion 2

Purchase the DJI MINI 3 PRO here: geni.us/zhdKw
Purchase the DJI Mavic 3 Pro: geni.us/chaEQ
DJI Avata Explorer Combo here: geni.us/Q8hglN4
In todays firmware update, you can now use your DJI Goggles V2 / Integra and Motion Controller 2 with the Avata, Mini 3 Pro and the whole Mavic 3 lineup.
FIRMWARE VERSIONS:
DJI GOGGLES INTEGRA V01.02.000
DJI RC MOTION 2 V01.03.000
-----------------------------------------------------
🚁 DJI MAVIC and AVATA VIDEOS:
DJI MAVIC 3 Pro Review: • 26 Things to Know - DJ...
DJI AVATA - The Review Video: • DJI AVATA - THE EXPERI...
DJI AVATA - Product Versions: • WHICH DJI AVATA KIT SH...
DJI AVATA - 13 Things: • BEFORE YOU BUY - 13 Th...
-----------------------------------------------------
📷 MY CORE VIDEO GEAR USED:
Sony A7SIII: geni.us/zu0h
Sony Digital Mic ECM-B1M: geni.us/46piYNr
Tamron 17-28 2.8: geni.us/Kip2tfN
Sony A7iii camera: geni.us/SAeE2
Tamron 28-75 2.8: amzn.to/2KwleRq
Peak Design Carbon Tripod: geni.us/0XVJm9
Wireless Mic: geni.us/P5w97B
Rode VideoMic NTG Studio Mic: geni.us/oWiw
SanDisk 128GB Extreme microSD: geni.us/KUIBqS
Sony Digital mic: geni.us/NABi70O
Godox SL-60W: amzn.to/2LGO31S
Pgytech Mantis Tripod: geni.us/uiRvV1
Phottix Raja Deep 80: amzn.to/2Kfticj
Boling RGB Led Video Light: amzn.to/2XQE6WT
-----------------------------------------------------
👕 FLYTPATH MERCHANDISE
teespring.com/stores/flytpath
-----------------------------------------------------
🛒 MORE GEAR I'VE REVIEWED
www.amazon.com/shop/flytpath
-----------------------------------------------------
🔗 STAY CONNECTED
www.flytpath.com
/ aldryn
/ ace
/ theflytpath
-----------------------------------------------------
👍 If you found value in my video, please don't forget to give it a big thumbs up. If you have any questions, feel free to comment below. Thanks for watching and please don't forget to subscribe to be notified on new videos.
-----------------------------------------------------
📧 MAIL TIME:
PO Box 502651
San Diego, CA 92150
-----------------------------------------------------
FlytPath is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
-----------------------------------------------------
#motion2 #mini3pro #djiintegra

[@Dod-Squad]

I wish they would do this for the Air2s.

[@YUCA525]

I hope they too that

[@anticsdos]

Always a pleasure to watch ur vids Aldryn. So relaxing, great landscapes and plenty of details. Keep up the good work ! 😊

[@RonaldBrown59]

Thanks for the update. It's nice to see the camera drones flying the goggles and Motion 2 controller. Great demo Aldryn, thanks for sharing.

[@Clayspeed]

Great video! Direct, informative and demonstration is sweet. And thanks for not trying to sell us stuff!!!

[@recideas]

thx for sharing your testflights! Really interesting update👍🏻

[@madclouds]

Way cool Aldryn! Thanks for sharing dude

[@EverythingWavy]

Awesome update from DJI. Great review!

[@txarchdroneguy4731]

Nice, Aldryn. Ive just updated both my Mini 3 Pro and Mavic 3 and bound both with the Integra and MC2 anxious to fly both tomorrow afternoon. Thx

[@lynsmith1096]

Good video Aldryn. I just updated all my gear this morning.

[@TriniWeekes]

That's is absolutely so cool. I think I will pick up the motion controller and the integra for my mavic 3. When I finally get into FPV I will have the googles.

[@randomstuff2607]

Awesome. Just ordered the goggles and motion controller. Can't wait.

[@TurtleSodadrives]

Ive been waiting for this! Heck yes! :D

[@eyeabove_mx]

Great tests and video man! This update makes the MINI 3 PRO in one of the best drones out there! Guess i am buying the googles and motion controller to test it out! 👁🚁

[@Mary-bs3rq]

Once more I’d like to thankyou for another awesome video (this one of course is the reason I just purchased a Mini 3 Pro and the head tracking video 2). Holy smokes what an ordeal to get everything up and working! Just got my Mini 3 Pro today…… linking and getting everything up and going wasn’t easy. For those of you that might be experiencing some issues, I’ll share my experience. *I have a mini 2 (love it 2) and thankfully I have the RC N1 because I needed it to update and register my Mini 3 Pro! I followed the process of updating all components (drone, goggles 2 and motion controller 2) then I tried to link them and I kept get my Avata screen (very frustrating). I traced my steps and tried to link several times restarting app and was able to link them all. I even started it up an had signal in the goggles but display said unable to remote ID and then another message about unlinking other remote (RC N1) or I would only be able to use my controller 4 times. Well, damn…..I was really getting in a mess. So……I did what any tech savy drone operator would do…….I deleted the app and reloaded it from scratch and guess what…..wha Lah….. the app started doing what it was supposed to do and I flew it in my living room without a glitch (BTW, I never fly indoors w/o blade guards 🙂). I can’t wait to fly it tomorrow…..reminds me of my Mavic Pro days with the big white goggles. I had head tracking then too plus a lot of other features, but this has come a long way in technology advances and hopefully will continue to improve as well!

[@dallasc.hunteriii490]

Great video and very informative!

[@jeeploggernz2289]

Just got my 3 Pro yesterday, great now i NEED to get the goggles and controller as well haha

[@corey1022]

I’ve been waiting for this update since I bought the Dji fpv !

[@BeautifulNorfolk]

Nice info, thanks!

[@floridaoutdooradventures8981]

You make it look very simple. You should have mentioned the Remote ID error and how to fix it. It took me a while to figure it out, it was such a pain in ass!!!

[@MrEddieNunez]

This is exciting!!!!

[@jordanhenriquedeoliveira919]

how cool i have the mavic 3 and the mavic mini pro. a question: could i use the googles and at the same time the smat comtroller? to have a co-pilot on flights that would be great.

[@Artat-home]

Congrats DJI🎉

[@FLAVIODRONE]

That´s amazing !

[@FlyZoneFpv]

Pretty cool Aldryn 👊🏻

[@fahmii]

Nice. Tq for the update for mini 3 pro

[@JohnnieDroneFlyer]

Got my Avata ordered yesterday. not sure if we should be flying camera drones with goggles but it does look cool. and with obstacle a avoidance on o guess it’s fine. looks like fun. good info. thanks

[@BugBobsWildWorld]

Wait, what? The latest update lets me use my Mini 3 Pro with the goggles and Motion controller? I had to check the date (not April 1) to make sure you weren't teasing us 😉 . Can't wait to get at it. Great video, Aldryn. Thank you!

[@Joe_Fotoleo]

Nice! That'll be fun to fly camera drones with goggles and MC2.

[@RaptorJesus.]

they should make more compatibility updates like this. i've just ordered an RC controller for my Avata, but now i'm tempted to buy a mavic to use with my FPV goggles, but not if i need to buy the motion controller 2

[@ALTN8NRG]

Very exciting times! I’ll have to shell out some cash for the goggles.

[@watchfromsky]

Thank you. İt's a useful video.👍🏻

[@hedgefund996]

Awesome Video

[@allanisidrodayandante2911]

Nice review of drone sir . New subscriber

[@jaonoctus21]

Thanks for this video

[@michlblacksmith]

Finally!!!! Yes

[@tkc_drone]

It was very interesting😆Great report✨I want a Mavic 3 pro😍

[@SmartMeditationFilms]

Thank you

[@renerjose4753]

nice development to have goggles2 use for the dji camera drones. is there a chance where you can still fly the mini3 pro using the basic DJI RC-N1 along with the goggles2? this way you still have full control of real sticks ang gimbal roller. the wonky motion controller just doesn’t click everyone’s buttons.

[@robertpaulcunanan4659]

Nice, shout0ut here in Philippines

[@jonahkaiguam]

I bought my M3 back in Apr '22 at Festival Mall Alabang 😊

[@JamesBinford2014]

Awesome!!

[@jesusgjchuza6491]

Super cool 😎

[@DansTubeTV]

I was the 1,000th like! Awesome video mate ❤

[@gaoosed]

I've been flying two dji fpv drones and this is great news unless you want to fly indoors I would not purchase the avata and would go to a Mavic 3 pro for fpv experience. Add manual mode and watch that sell out 😊

[@charl1em0uze89]

Fantastic news and great review. Tell me this though, do you know if while flying with the Googles is it possible to also show the video simultaneously on a nearby screen like an Android? If yes, then brilliant!

[@jonahkaiguam]

Awesome first flights with the Googles Integra, Motion 2 on the mini3pro and M3Pro. Obly question i have is...how do you tilt the gimbal using the Motion 2?

[@LoneStarUAV]

I hope the DJI enables this feature for the Air 2S as well!

[@chillingdog4139]

Nope, they wont. It is confirmed that its only dji's 3s

[@FlyingBeeFPV]

Great video! Thank you so much!! But please please measure the latency of the video link in the goggles! It is very important for my buying decision!! Maybe use a GoPro hero 11 for it. Thank you so much!!

[@nikolassapalidis1539]

Hi Aldryn, gerat video and useful information. Do you know if you can fly with fpv controller 2 and goggles 2 together with mini 3 pro? Thanks a lot!!! Safe flights!

[@thelongarmmarine]

Another interesting video…curious if you can use the motion controller w/o the goggles…I fly with a MP2 w/ the FT Aviator joystick & Epson Moverio glasses…so no need for a spotter…

[@sibertiger17]

Looks fun but is it worth getting the goggles and motion control? How often do you use them?

[@Minotauros5]

Hi Aldryn, great content as always. Just a quick question if you don't mind. I could swear that I have seen where the Mavic 3 Pro can be flown with the RC N1 remote. This would be a deal breaker for me if you can't as I need the ability to be able to use a tablet to fly. Thanks so much in advance.

[@ElevatedVisionz]

I have it working with my DJI RC that shipped with the classic. Do all the connection steps, once you see video in your goggles, turn them off and take off like you would normally, then turn goggles on. You will get an error in the lower right corner, but has no effect on flight.

[@TheYellowDmon]

Great video. I've just purchased the Motion 2 controller and already have the Mini 3 Pro with the RC1 controller. I see you have the same message about Not using bound device. How do you get rid this yet still have the option to revert back to the RC1 controller for some flights?

[@rw4669]

Thanks for video! Could u check for us if the Mini3Pro has Head Tracking with those Goggles 2?

[@wicusconradie]

I had to choose between the Mini 3 Pro and Avata for my first drone. I did buy the prop guards for flying indoors, but it made the Mini 3 very unstable. Also, I won't feel comfortable flying the Mini 3 in FPV inside buildings. But this is still awesome. Would really love to try this combo.

[@TheRealJonathanArdila]

That's odd, my mini 3 pro with props flights just fine. It might be the prop guards themselves for you

[@wicusconradie]

@@TheRealJonathanArdila I flew in a dug out trench. The turbulence and guard together is not a good combination. It did not crash though.

[@michaelarmstrong1604]

Ive been so tempted to buy the Avata because there was no FPV on the mini 3 Pro. Ill wait and what you think of it on the next few flights. So tempted to get the goggles now

[@JingZhou]

do you have the rocksteady to stabilize the footage to avoid the up and down movement?

[@1ghostdawg]

Can u use the goggles for monitor & mini 3 remote to move the drone at the same time?

[@AndrewVanBeekOttawa]

It looks fun but I really hope they make this happen with the regular RCs. The ability to see more clearly while flying would be a big deal. The motion controller is more like a toy.

[@jimbernard3289]

Exactly. For now it's a bad value proposition, being limited to the motion controllers and locked into FPV mode with the Mini 3 Pro. Way too expensive to be that limited. Otherwise i would buy a pair of googles today.

[@AndrewVanBeekOttawa]

@@jimbernard3289 yep, I had one on order before seeing the limitation. Cancelled on the spot!

[@buddy5152]

man i hope they do this for the standard mini 3. You think they will?

[@Brad.W]

I am sure you have already discovered it by now but I noticed that you were going into the menus by pressing on the goggles. Hopefully you discovered that you can do the same thing by pushing in on the scroll wheel on the motion 2 controller.

[@RanjanSharma2001]

Does the Googles & motion controller help while flying in cine mode on Dji Mini 3 pro? Would like to see a tight space flying slow & cinematic moment with motion controller.

[@bobshafto]

Hey! That's my neck of the woods.

[@ackers33]

I wonder if the range is different for the Mavic and mini with the Goggles?

[@miksterr]

Excellent news. Any chance you can also (At same time) use the RC with screen for someone else to watch?

[@ElevatedVisionz]

It does shut that screen down. I am working on a workaround. I have it working with my DJI RC that shipped with the classic. Do all the connection steps, once you see video in your goggles, turn them off and take off like you would normally, then turn goggles on. You will get an error in the lower right corner, but has no effect on flight.

[@themagarmuch]

Hello captain, nice video, how do you avoid plugging your Goggles to your phone? I get a Remote ID Error if I don't plug my phone.

[@bushidoconectorgustavooliveira]

Muito bom é a minha teoria poderia fazer um firmware para o mini se mini 2 para usar o controle com tela

[@kelvinlau9623]

Can u show us how to fly with cam angle 90 degree down while drone forwarding?

[@colinmclean1300]

I have the Avata with Googles 2 and just last week procured the Motion Controller 2. I have mini 3 pro. I don't have a m3 as my Air2s surficed for my needs. Now with m3 Pro released, I intend to get it in the next few weeks. Is the Integra Googles worth upgrading to, or is it really a cross grade?

[@DroningaboutIreland]

Great video Aldryn, will the V2 goggles and the original Motion Controller be compatible with the Mavic series?

[@ElevatedVisionz]

I have it working with my DJI RC that shipped with the classic. Do all the connection steps, once you see video in your goggles, turn them off and take off like you would normally, then turn goggles on. You will get an error in the lower right corner, but has no effect on flight.

[@DroningaboutIreland]

@@ElevatedVisionz cheers Dev I'll try that.

[@erfuellte-ehe]

Can you switch the cameras during flight using this setup? What about ISO/Shutter/etc?

[@Dasilva1515]

Question, could you fly it with the controller it comes with and use the googles? not queen on the motion controller

[@jameslee1345]

Can the head track function in goggle of avata also available to Mini 3 Pro and Mavic 3 Pro?

[@creativelens_chemnitz]

Nice Video :) Can you Tell me how to Record the Settings etc in the goggles? Is this only possible with the Goggles 2 or can I do it with the V2, too?

[@SunriseWaterMedia]

I believe it's only the Goggles 2 or Integra 😢

[@jsvn1357]

I suspect the drone compatibility has to do with the transmission technology, the goggles & motion controllers use ocusync 3 pro while mini 3, air 2s, etc. use older version protocols. but then the original dji air unit also doesn't use O3 pro and yet is supported, so Im not 100% sure on this theory either

[@georgep.9014]

Are you able to use the zoom feature on mavic 3 while wearing the googles 2 ?

[@DoloresLowe]

No linking for me. Tried to use the new integra goggles with my Mavic 3 cine. Seems like the software update necessary to link has removed the ability of any controller (phone w/dji fly, goggles/RC Pro and mini 2 controller with phone) to see my drone. DJI told me after a couple of hours of troubleshooting to "Take it to the Apple Store/ because it is a problem with the controller." (Yes I saved a screenshot of that craziness). So I am waiting for a higher level call back from their support team or am stuck with mailing it in for the arduous task of having someone with some real knowledge who can fix this. If anyone reads this and has any fixes I would greatly appreciate the advice!! And thanks, @FlytPath for your excellent video!

[@ThierryAZIMUTTT]

peut-on utiliser les lunettes en même temps que la télécommande RC sans le Motion Contrôler? Merci

[@reddanselmo8781]

Is it possible to use the goggles with the RC Pro controller?

[@karenmickel6205]

Did you have to bind your motion controller?

[@Parrothed5150]

Is the Air2s supported?

[@MrReefxl]

can you control the gimbal with the Goggles and still use the RC-Pro remote?

[@SunriseWaterMedia]

Interesting that DJI limited it to the motion 2. I was hoping they'd allow the RC Pro and the Goggles 2.

[@ElevatedVisionz]

I have it working with my DJI RC that shipped with the classic. Do all the connection steps, once you see video in your goggles, turn them off and take off like you would normally, then turn goggles on. You will get an error in the lower right corner, but has no effect on flight.

[@hd-1470]

​@@ElevatedVisionz you're absolutely right. I've tried it with my Mini 3 Pro + RCN1. Tks dude👍

[@WestVirginiasBigred271]

Can you just use the goggles with the mini 3 pro without the motion controller? I think just being able to use the goggles will help flying in the daylight when it is really sunny. Because it’s hard to see the screen

[@ElevatedVisionz]

@@WestVirginiasBigred271 yes, see my comment above

[@RafalGalinski_drony]

@@ElevatedVisionz did you use MC 2 for the initial connection phase or just M3 Classic + DJI RC + DJI Goggles 2 ? That is essential because only a few people have MC 2. ;)

[@TomSpurlock]

Please let us know if the Mini 3 pro can be flown with the stock controller (with screen) while using the goggles. In other words, will the flight be displayed on the stock controller screen as well as in the goggles. Dual view would be very helpful in certain applications.

[@armandoferreira8790]

Unfortunately at this moment no. Only with the goggles.

[@jastube1]

Will it it possible to fly Mavic 3 with the Integra goggles and a regular remote in the future..?

[@jonred233]

Does head tracking work with it?

[@BrianKushner]

So you can't use a standard controller with the goggles? I would need the better control the controller offers...???

[@laurenthenry]

Can you dive like with an fpv drone ? 😁

[@andreschapero3615]

Still not clear to me if the goggles that came with my DJI FPV that I purchased a year ago will work with this new firmware if I buy a Mavic 3 classic ?

[@tokkyofaison5390]

Hi can u fly manually with the motion control.?

[@captainbill1721]

My question is can you use the FPV Remote Controller instead of the Motion Controller? Thanks

[@k.p.droneenterprises3565]

Can you use the goggles without the motion controller on the mini three pro?

[@sssssssss4258]

Can an avata transmitter be operated on a drone mini 3 pro ??

[@mcortes2733]

Does this mean the Mavic 3 Thermal is also now able to be piloted wit the giggles and motion 2?

[@jeffreynolds2190]

do you a to use motion controller to fly with intregra goggles on Mavic 3 or mini 3 pro , I would rather fly with my RC control ?

[@seainc]

Does Mavic 3 + RC Pro Controller + Goggle Integra works? Thanks

[@cestohvxd]

To the naked eye....the video looks smooth while flying with head tracking.....but from my experience.....i get many small jerks in my videos when i enable head tracking ....specifically with the Mavic 3 classic and mini 3 pro....have you ever tried recording with headtracking on and reviewing the footage...? Any small random jerks in your videos...while head tracking is enabled...?

[@Utubeisazzho]

Can you use fpv2 controller for mini 3 pro or Avata

[@scottw595]

Can you use the rc to fly with the goggles?

[@beamifrend]

I assume the Mini 3 is not compatible with the Goggles 2 because it runs Occusync 2?