Flywoo Firelfy Nano Baby DC16 1S Walksnail

[@ghettorecording2925]

oldguyFPV; Lookin good! Fly safe, fly free!

[@BigKahunaFPV]

That looks like fun. Best regards 👍

[@smithe68]

It was! Thanks and happy flying!

[@ghettorecording2925]

oldguyFPV; Is it hard to walk a snail? Askin for a friend! Fly safe, fly free!

[@smithe68]

Haha! Thank you!

[@verbalance5630]

Can you please explain (show or anything) how you connected your Goku FC with the Waksnail 1s Vtx. Because the FC has no Pads but only the HD Plug or? Did you make a custom rewired plug ? Normally on big quads, I plug my Walksnail Vtx and solder the other side direct to the FC to the Pads

[@smithe68]

Hello, I’ve got mine soldered to pads that my FC has but it actually has the HD plug. For larger quads I have just taken the DJI 6 pin cable and used the 4 wires Walksnail needs and soldered it to the Walksnail cable. I hope that makes sense? This is the FC I have flywoo.net/products/goku-f405-hd-1-2s-elrs-aio-v2

[@godangle]

Cut the connector off of the Walksnail Vtx. Find the cluster of pads that has Tx2 and RX2. Solder black->gnd, red->+5v, white->Tx, and gray->Rx. There is no reverse polarity protection, so make extremely sure that you have the red and the black soldered correctly. Ask me how I know.

[@EnglishTurbines]

Not bad for 1S eh...?....😏🇬🇧

[@smithe68]

Not at all, been able to power loop it and other things pretty easily!