FMS AVANTI V3 70MM Runway Demo By: RCINFORMER

GET your FMS AVANTI V3 with NEW REFLEX stabilizer at HORIZON HOBBY HERE► bit.ly/3rADyBV
GET your FMS AVANTI V3 at HORIZON HOBBY HERE►bit.ly/32Rwd4M
Check out the Unboxing video here► • FMS AVANTI V3 70MM "PO...
Check out the Windy Day Demo video here► • FMS AVANTI V3 Windy Da...
Clicking on our links and purchasing from our links supports RCINFORMER!
Thank You for your support!
▼ RECOMENDED LIPO PACKS for the FMS AVANTI V3▼
-SPEKTRUM 6S 3200mAh 100c lipo IC3► bit.ly/2yfd1AU
-SPEKTRUM 6S 3200mAh 50c lipo IC3► bit.ly/3g6iX03
-SPEKTRUM 6S 4000mAh 50c lipo IC5► bit.ly/3bPdpUu
Recomended RoaringTop 6s 3300 70c pack: bit.ly/2NBHVHM
▼Get your SPEKTRUM Smart Charging components here▼
▼Recommended SMART CHARGERS▼
-Smart 30A 540W Power Supply► bit.ly/3anF8LY
-Smart S1200 DC Charger, 1x200W► bit.ly/2vPYbj8
-S1500 DC Smart Charger, 1x500W► bit.ly/2WGbsWC
▼RECOMMENDED DUAL CHANNEL A/C SMART CHARGER▼
-S2100 Smart DUAL AC charger► bit.ly/2ZsmCzL
▼SPEKTRUM SMART BATTERY CHECKER USED IN ALL MY VIDEOS▼
bit.ly/3c7vPAf
SMART CONNECTORS PAGE: bit.ly/2XivDJ0
-DX9 Black 9-Channel DSMX Transmitter that I use► bit.ly/3fwNaos
RCINFORMER on FACEBOOK► / rcinformer
www.RCINFORMER...
▼HELP SUPPORT THIS CHANNEL BY USING OUR LINKS TO PURCHASE▼
.... Special thanks if you were able to order it thru my Affiliate links here.... that is greatly appreciated! ... At no additional cost to you, Purchasing thru our affiliate links and Amazon Store supports RCINFORMER as we do earn a small fee for the referral. Thank You for supporting us!
▼Please visit my new AMAZON Store for ONLY the Exclusive stuff that I use Here▼
www.amazon.com...
RCINFORMER on FACEBOOK► / rcinformer
www.RCINFORMER...
Follow Rich at RCINFORMER on Social Media
FACEBOOK► / rcinformer
INSTAGRAM► / rcinformer_official
TWITTER► / rcinformero
Website► www.RCINFORMER...

[@michaelcuthbert6956]

Really appreciate you and Steve bringing us these reviews at this time. Stay safe.

[@davidhitchFPV]

I have several edf jets…this v3 is my favorite to fly and just have fun! It’s so maneuverable and rock solid!

[@airhammer6203]

FMS just keeps making them better 'n better. Great flying Rich. Nice camera work Steve. AirHammer out!!

[@victorrcjets7660]

Nice flying Rich! Loved the inverted pass!

[@JeffsCustomRC]

Always great videos Rich!!! And excellent shooting Steve, thanks for sharing guys👊🏼👊🏼👊🏼💥💥🔥🔥

[@ShadowOppsRC]

Always a great review Rich!

[@gooniac33]

Looks great! I for sure need to get this updated version!!

[@RCINFORMER]

Ray, Please consider using my links to get one:)

[@gooniac33]

RCINFORMER of course man!! Will do for sure when the time comes!!

[@victorrcjets7660]

@@gooniac33 for sure dude, i love the speed of this little jet!

[@1stMarine]

Great job Rich 👍♥️

[@Bellairvideo]

As always great video ....great pilot...many thanks boys

[@GrotrianSeiler]

Very good pilot. Respect.

[@LuisMunoz-il8nh]

Beautiful 😍

[@scottynorris2164]

Thanks Rich for bringing all this wealth of information to RC pilots! I just built my Avanti and wondering what did you use for wieght in the canopy, I sure don't want to maiden tail heavy, Fast as She is, Thanks You're South Carolina Neighbor ⛈

[@mrk8212]

Good flying, good vid. Some guys at the field have them, the sound is really cool. Think I will get me one too

[@RCINFORMER]

Thanks for using my link in the description below the video!

[@RCINFORMER]

If you're interested, you can also get it at Horizon Hobby with the REFLEX Stabilizer! GET your FMS AVANTI V3 with NEW REFLEX stabilizer at HORIZON HOBBY HERE► bit.ly/3rADyBV

[@Rhoedision]

Very Nice Richi Awesome brother 💯❤❤❤💯👊👊

[@artconn2538]

Hi Rich. I'm new to the RC world. I have an Aeroscout and love it. I've done 450 touch and goes (out of a planned 1000) on it in order to get proficient at approach and landing. My next plane is the Habu SS 70 mm. After getting proficient with the Habu would you reccomend the Avanti?

[@RCINFORMER]

Sure. The Avanti & Futura would be great options. You have the FMS AVANTI 70MM, The FMS FUTURA 80MM, & Freewing Avanti 80mm .... All are great options!

[@artconn2538]

@@RCINFORMER Thanks Rich. By the way I forgot to mention your skill is bannanas!! Especially when you did a low and inverted pass along the runway.... it was sublime! I enjoy watching you fly as much as I enjoy flying itself.

[@artconn2538]

@@RCINFORMER Thanks Rich. By the way I forgot to mention your skill is bannanas!! Especially when you did a low and inverted pass along the runway.... it was sublime! I enjoy watching you fly as much as I enjoy flying itself.

[@oned8305]

I'm another person that's late to the show for the Avanti V3 just got one did you guys use any expo? Going to maiden soon once the winds die down in my parts great demo btw.👍🏼👍🏼

[@RCINFORMER]

No expo in my setup... an excellent flyer!

[@oned8305]

@@RCINFORMER Thankyou much appreciated

[@RCINFORMER]

@@oned8305 Thanks for using my links to purchase!

[@zacharymohrmann4329]

Comming from me who hates flying coffee cups, I have to say not a bad flight...!

[@RCINFORMER]

Foam flys good! This EPO material is NOT your typical styrofoam.... its tough!

[@adrianmilanesi9143]

Great video, in your opinion witch one Flys better The FMS 70mm Avanti or the Viper 70mm. Thanks

[@jcrcsecretary2564]

I'm looking for a 70mm sport jet which will work ok for hand launching and belly landing on the pasture next to my house. This is for practicing aerobatics when I can't get to my regular flying field. So any comments Rich?

[@RCINFORMER]

It should work ok, but you would have to try it to know. Its small enough yo hand launch. Also the FMS or E-flite Viper may also work.

[@MrQuestionboy]

Another fantastic flight demo. What is your Take off flaps and Landing Flaps? Any down elevator mix for those 2 settings?

[@MrWhatahelisdis]

Will that landing gear fit on the Viper 70mm?

[@RCINFORMER]

Have not tried it.

[@shiznuts]

Probably my favorite rc plane of them all. It just looks like it tracks wonderfully, looks amazing... and the sound, the SOUND! Must be one of the best souning EDFs out there, not sure what else could compete. Definitely need to add some one once I'm proficient enough to fly again! (Good decade of neglecting the hobby)

[@jeffarab4947]

It is a nice jet love it. The f16 also sounds great it's the way these intakes and single exhaust sound much more like a real jet

[@WX4CB]

is that at RCACF in orlando? havent been there for ages

[@RCINFORMER]

Yep, RCACF

[@timblankenship7817]

I have NIB V2 avanti. What is the difference? What was upgraded? Can a version 2 be made a version 3?

[@RCINFORMER]

The V3 has lights and really nice aluminum machine landing Gear!

[@timblankenship7817]

RCINFORMER - can those be purchased and installed on v2?

[@rcplanesandfriends3067]

I know this is an old vid but I just picked up the Avanti v3 and by the book I ordered 3300 6s's. Thank for the review. I'll add 2 oz to the canopy! By the way, mine came with the Reflex v2. Have you used this? I fly mostly giant scale stuff and never use gyros, although I was impressed by the easy config and it seems to work. Hopefully she flies well!

[@RCINFORMER]

You may or may not need the extra weight in the new version, especially with the reflex added stabilization.

[@rcplanesandfriends3067]

@@RCINFORMER I did add the weight and it balances perfectly at the the edge of the hard plastic just like in the video. Thanks again.!

[@BDTennessee]

Hey Rich! In video you stated 100% on full but using 70% medium for flying. I seen in other videos your using 125 (high) 100 (mid) and 80 (low). Do you have this plane dialed down? Maybe doesnt need as high percentage or you didnt move the control rods for better resolution like you talk about in videos?

[@RCINFORMER]

BD, it depends in the plane. This plane is so fast that you want less control surface movement for high speed flight and more movement when you slow it down. I sometimes can get away with using 125% on a slower model & often move the rod inward on the servo horn side to use the 125%

[@BDTennessee]

@@RCINFORMER Thanks for the info!

[@RCINFORMER]

GET your FMS AVANTI V3 with NEW REFLEX stabilizer at HORIZON HOBBY HERE► bit.ly/3rADyBV

[@mongoose4117]

Is this plane capable of the same top speed as the eflite viper 70mm? Really like the avanti v3 but am considering the viper due to its high top speed and low cost with as3x and safe mode equipped

[@Fran11784]

How does this jet fly compared to the Viper? Does it fly similar? Thanks

[@RCINFORMER]

I prefer it to the viper, even though both are similar. The viper is more "airliner" like with its winglets and smooth flight characteristics. The Avanti is a bit more nimble and aerobatic. Both planes have a very wide flight envelope and will fly well fast and slow.

[@tygawoods468]

What field is this? Looks familiar

[@RCINFORMER]

RCACF

[@whoareyou310]

Do you need a gyro in this thing?

[@JohnTaylor-ne2kz]

Hi Steve, I like this jet and would like to have thrust reversing on it. This Avanti comes with a Predator 80A 5A BEC. If I swap it with an Avian 100A 8A Bec, can the electronics be harmed due to the higher amperage? The Avian 80A ESC also has an 8A BEC, so I figured the 100A might be better, but I don't know a lot about amperage and how higher or lower numbers can affect the electronics. I would appreciate any info you can offer on this. Thanks Steve and I really like your videos.

[@RCINFORMER]

Hey man thanks for the support. The extra amps wont hurt, just make sure its under 6v an you should be fine🙂

[@freddynadery1925]

Avanti v3 or Futura v2?