FNIRSI 1013D Differences between original and alternative firmware.

Alternative firmware: Open source code
Displays real unfiltered waveforms ( the original displays an imaginary waveform )
No bug with switch 100mV
It works from 0V (unlike the original)
It doesn't freeze.
The cursor shows Y1 and Y2 and the difference between Y1 and Y2
Possibility to add time and date ( If the RTC circuit is installed )
Ability to choose sensitivity directly from the channel menu
The measurement menu items are on the right side :D
Quick selection of all measurement items, quick cancellation of all measurement items.
Improved appearance
The firmware is constantly improved. ( original firmware never )
disadvantage
no FFT (It's in the plan)
Firmware is constantly evolving. So FFT will also be possible.
www.eevblog.co...
github.com/Atl...

[@СебастианСбербанко]

well done!

[@StemDeath]

💪

[@alfonsovieco]

Why the wave change colour, yellow or red? Time por division is posible 1 sec or 2 as original?

[@atlanko1]

Red if the AD converter range is exceeded. 1 and 2s mode is not yet implemented, the given mode does not enable the launcher - see the original firmware

[@alfonsovieco]

Ok....thank you for all

[@atlanko1]

V0.023n add long time base, support 100ms/div to 50s/div

[@alfonsovieco]

@@atlanko1 thnank you ....i download thia morning....great job.

[@alfonsovieco]

I need a tutorial to change the firmware....its possible? After i can return to original?

[@atlanko1]

Use a new SD card for the firmware. By exchanging it for a flood card, you will return to the original firmware. Check out my other videos. The procedure is at least in 2 or on the pages under the video. The alternative firmware is on the sd card, the original is stored in FLASH - it does not change.

[@alfonsovieco]

@@atlanko1thank you, I will tried.

[@michaelpopov1548]

Thank you, man! Happy New Year!