FNIRSI Spot Welder SWM-10 with Intelligent Color Screen

[@thomaslehnst4170]

Great video, thank you very much. Because of this video I ordered this spot welder too. Yesterday I wanted to change a 18650 cell to repair a Parkside 20V Accu. But the results were bad, it was mor glueing, not welding. I used the same parameter from this video. Then I downloaded an update file from FNIRSI, and now the results are fine. Maybe someone has the same problem. I'm Geman, so excuse my bad english.

[@Naphil71]

Danke für die Info😊

[@olegsergeyevitch]

Они увеличили длительность импульсов.

[@olegsergeyevitch]

watch?v=QCW1gKhY2_U

[@diytoptricks]

Great video! The detailed review of the FNIRSI Spot Welder SWM-10 with the intelligent color screen was exactly what I was looking for. Thank you for your clear and concise explanations. Looking forward to more of your content!

[@ErCanEverything]

Thank you my Friend🙂🤝

[@killerkrash911]

great Job my friend showing the different sizes of welding nickel plates and power setting ....Awesome!!!!! .Thank you.

[@tageandersson3043]

Thanks for an enriching information video about this spot welder machine just acquired here in the house. Especially interesting where you pop up and the entrails are revealed. Unfortunately, spot welding will often not hold the welding points for 2 reasons, 1 one does not hold the welding pins 100% vertically down towards the welding material, or 2 one spot welds over insufficiently cleaned surfaces. If you at least weld with 100% vertical pins, you achieve better welding points. Keep going, lovely video report.

[@royt5069]

This is so awesome, thanks for sharing! I have a question - can the battery pack in the SWM-10 be easily replaced once it's performance deteriorates? Thanks!

[@comjoe]

Informative video. Can you show, how to update to the latest firmware that available now at the fnirsi website? Thanks

[@vascom3]

Still waiting on your parkside battery spot welder update video 🙂👍🏼

[@ErCanEverything]

Bearing in mind the discharge current of these cells which are used in spot welders. I need to use more than 5 x 8Ah batteries for good performance. Otherwise, weaklings come.

[@FixitEasyDIY]

Nice little and useful machine

[@ErCanEverything]

This one is much better than the previous DH30

[@E-hab]

Good demonstration

[@aydinoglukemal]

Fnırsı swm 10 firmware yüklemesi ile ilgili bir video çekerseniz çok iyi olur. Şimdiden teşekkür ederim.

[@DjaniAgain]

I'm wondering how these little MOSFET'S can handle such current 🤯 And these brass or copper bars 🤩 serious stuff.

[@ErCanEverything]

I thought there would be at least 8 transistors, but these are really very powerful and I don't think there is a need for more. FNIRSI really make quality stuff at affordable prices.

[@ArdiansyahRans]

if i already have dx10 spot welder, is it worth upgrading to this?, or just save the money to buy really proper spot welder like glitter 801D?

[@DK43]

It seems like the cables could be a little bit longer. What do you think?

[@ErCanEverything]

I think so too, at least 5cm more.💁

[@-PORK-CHOP-]

How would you rate this to other spot welders tested, which one do you rate the best

[@KHOAIHOANG81]

That Good And Number One For You...😁😁😁👍♥️👍

[@sheralam69128]

Nice video Showed everything

[@ErCanEverything]

I'm glad if you liked it my Friend🙂🤝🤝🤝

[@roma8111]

It will weld .15 pure nickel at full power but I don’t think it will do .20. There’s a big difference between plated steel and pure nickel

[@jayaramjayaramsri8402]

Hi bro super im big fan

[@ErCanEverything]

Thank you my Friend🙂🤝

[@jayaramjayaramsri8402]

Ok bro

[@nursaitaksu-yt1nr]

👍👍👍👍👍

[@aydinoglukemal]

İçinde ki pil lityum pil mi?

[@ray-charc3131]

The cable plug connectors located not at a good position and its construction seems not secured enough too

[@Zakkariya-y3x]

Nice bro

[@khalilkh7389]

Can it spot weld 0.2 pure nickel strip? Or 0.15 pure nickel?

[@markb1911]

It can do 0.15mm pure nickel, but that’s pushing it. 0.2mm pure nickel is no dice. I’m not sure about 0.2mm nickel-plated steel.

[@khalilkh7389]

@@markb1911 i think in this price range it is very Good quality welder

[@GearJammer-me8uj]

Can this do a copper nickel sandwich? thanks

[@ErCanEverything]

I have to try it🤔

[@GearJammer-me8uj]

@@ErCanEverything thanks that would be awesome if it will do it .. thanks again

[@markb1911]

@@GearJammer-me8uj No this welder does not push enough current to weld copper-nickel sandwich. That would be awesome though.

[@leobrynn4171]

В следующий раз разбирай болгаркой. Или молотоком с зубилом.

[@GeorgeNjero]

I bought it eeeeeh.

[@electroniquepassion]

👍👋❤️❤️👋👍

[@ErCanEverything]

Hello my Friend👋👋👋

[@kocetoMR]

Ето и моя spot welder: kzbin.info/www/bejne/l5nSXpqGZs96obMsi=HK6TMl1xaIfqMO4w