Focus MK2 facelift headlight dipped beam bulb replacement

[@letswalk3985]

Been driving around with only one headlight for a couple of days and the mechanics been postponing the job, finally sorted it out by self with the help of your video. Thank you very much

[@GentilsGarage]

Thank you, happy to help

[@nidac-ib3ld]

Today I change the defective H7, easy and without problems. Thanks again for all yours videos.

[@GentilsGarage]

Thank you, glad it helped

[@nowthenad3286]

Your excellent camera work makes all the difference. It's so funny hearing you say English idioms like "Job's a good'un".

[@GentilsGarage]

Thank you. I do my best with my iPhone. I’ve been here for many years so I eventually picked up the lingo

[@brianfearn4246]

Great video, i find it easier if you put the bulb back in place first then reattach the plug to the bulb 😊

[@GentilsGarage]

Thanks. Yes it can work both ways. On my wife's mk3 it's easier that way

[@TheHDPerson]

I love all your videos , thank you for the content ! So helpful and clear

[@GentilsGarage]

Thank you very much

[@RobbieNero]

Thanks for the video my dipped light bulb just went and my headlights are like yours with the 1 screw and flap things and didn't know why it was not lifting out all the other videos seem to just have 2 screws top and bottom and easily lifts out.

[@GentilsGarage]

Thank you, glad it helped

[@bluegreenworld333]

Great video. What happens if the clip retaining light bulb won't move? Can't change mine...

[@GentilsGarage]

Thanks. not sure really... i assume that the only solution might be to break it off

[@bradt8218]

Thanks for the help. Headlight out in a minute. Great video.

[@GentilsGarage]

Thank you very much

[@kevingoldbey7401]

Hi what number is the high beam bulb the dipped is h7 what's the other one

[@GentilsGarage]

High beam is H1

[@hongsienkwee537]

So much easier than on the Mk I! I spend almost an hour in near dark, both lightbulbs died on my at the same time, had to race down to a manned petrolstation to get insanely overprized H7 bulbs and pry them in by hand without removing the lamphousing on the mk I, and my mobilelight also died on me as I didn't charged the battery....managed to do it though

[@GentilsGarage]

I didn’t know that. I had a mk1 in the past, but funnily enough, I never had to change a light bulb.

[@hongsienkwee537]

@@GentilsGarage Mine was this type, there is this rectangular cap that needs to be removed and you can pry open the clips by touch basically, as its hard to look inside specially when dark :-( : kzbin.info/www/bejne/oaOrY4OLqp19i8U

[@ΑρηςΤσολακης-ε3γ]

H7 or H1??

[@GentilsGarage]

H7

[@kevingoldbey7401]

Thanks

[@GentilsGarage]

No problem

[@stephenm5000]

How can you spend 10 minutes changing the bulbs, and not finish off with a 5 second shot showing us that they now work! LOL

[@GentilsGarage]

Stephen M unfortunately I was a bit in a rush at the time and in the end I completely forgot about doing a working shot. The other service where I changed the tail and numberplate lights, I did show them working in the end.

[@lazyfishing2919]

Does it matter the vid was how to change a bulb he changed the bulb made my life easier too

[@howardsmith7993]

Useless....you cant see anything....hands in the way

[@GentilsGarage]

I’m afraid I can’t chop them off. Other viewers managed alright.

[@lazyfishing2919]

I mean u have to be pretty special to not understand the basics of what he's showing you GOOD VID MATE KEEP IT UP 😊

[@lazyfishing2919]

How dare u not chop your hands off for the 1 person that thought they got in the way shame on you 😂😂😂😂😂

[@E3Anas]

Very helpful video thank you

[@GentilsGarage]

Thank you