Ford 3000 Carb Kit

[@BobSmith-iu3hx]

Are you going to make anymore new videos? Belated Merry Christmas by the way from Ottawa, Ontario!.

[@CanadianRedneck15]

Merry Christmas to you as well. I expect to be making videos again in the spring, as you can see in the videos I work outdoors so am waiting for warmer weather. Thanks for watching!

[@inkbythebarrelandpaperbyth6905]

Thank for the content. McDonald carburetor in Alabama has a lot of knowlege snd products gove them a googling

[@CanadianRedneck15]

Good to know thank you and thanks for watching!

[@JimsNBHomestead]

I moved to New Brunswick, I'm watching you LOL

[@CanadianRedneck15]

Awesome Jim, where abouts?

[@JimsNBHomestead]

@@CanadianRedneck15 Campbellton right now

[@CanadianRedneck15]

@@JimsNBHomestead Well dam, dropped into a hot-spot. I'm near Sussex so unfortunately not real close.

[@slaphands7703]

Love the vids! Where did you go?

[@CanadianRedneck15]

I'm still here, been hibernating like a bear. :) I've got a new project coming in soon, videos will resume. :) Thanks for watching!

[@slaphands7703]

@@CanadianRedneck15 good to hear. Thanks for entertaining us. The b414 content has come in handy for me. Cheers from centre of Canada.

[@BobSmith-iu3hx]

@@CanadianRedneck15 Good to hear that there is another season of videos starting.

[@ExploringCabinsandMines]

The two brass plugs connected by the spring what does the do? it doesn't even move , what's the point of the spring ?

[@CanadianRedneck15]

I don't remember now. It's kind of a fiddly d!ck of a carb. Thanks for watching!

[@kennyvelez8060]

Just found your channel and I am now a new subscriber, I just inherited my late fathers Massey Ferguson 230 and the clutch is frozen and the brakes are to the floor and barley grab if at all, is this a somewhat east fix? I am mechanically inclined (gas motors, race cars and mud trucks and 4x4 monster trucks) but I have never taken a farm tractor apart before, I have changed filters and fluids and belts and holes on it in the past oh and a front tire, is this something that can be done or should I leave it to the professionals, I've watched most of your videos and you pretty much cover the process,

[@CanadianRedneck15]

The clutch you will likely have to split the tractor and replace, it sounds like you are pretty handy and comfortable working on things so it shouldn't be too much of a challenge. You can check some of my Massey clutch videos, they are pretty much alike. A 230 should have mechanical drum brakes at the hind wheels. You should be able to adjust the pedals up. If that doesn't correct the problem a set of brake shoes should do it. The front tire wouldn't be difficult but if you are buying a new tire installation is often included in the price. Thanks for watching!

[@lloydharrold]

Where do I get the Hollie carburetor kit

[@CanadianRedneck15]

Any local parts dealer should be able to get that for you. Thanks for watching!

[@jackfowley6157]

hi dave i have a case international 885xl .i bought it without hydraulics working . i found out that the hydraulic pump gasket was shredded. i changed that and it worked for 10 mins and lost hydraulics again. i had no filter for it when fixed so thought a valve in the MCV was blocked. checked all no dirt in them. i had the new seals and filter just landed today should i do anthing before i put it in or what do you think.

[@CanadianRedneck15]

I would think there must be some kind of restriction or blockage to blow out the pump gasket, check the MCV thoroughly for any dirt in the ports etc. and make sure the pickup screen is clean. Thanks for watching!

[@jackfowley6157]

Thank you very much for reply on such short time scale

[@jackfowley6157]

@@CanadianRedneck15 what is the pickup screen

[@CanadianRedneck15]

@@jackfowley6157 I believe there should be a screen on the oil suction tube, maybe I am confusing with other models.

[@frankz1125]

Hi CR. I messaged you a couple months ago and you recommended Chown for parts. They do not seem to have what I need. Would you have a rotor for the distributor of my 64 B414?

[@CanadianRedneck15]

Sorry I don't. They have not been available for months now, stupid wu flu!

[@frankz1125]

@@CanadianRedneck15 I tried another company. I havent heard back yet. Thanks anyway

[@frankz1125]

@@CanadianRedneck15 I found a company with stock parts if you need some yourself. Thanks for your help

[@CanadianRedneck15]

@@frankz1125 Great news, glad you were able to get what you need!

[@owenhill9944]

How do you replace a handbrake band on an ih 84 series

[@CanadianRedneck15]

Supposedly you can fish it through the hole in the side of the case where the bracket holds the band, otherwise you will have to take the lift cover off. Thanks for watching!

[@owenhill9944]

@@CanadianRedneck15 thanks for the help.

[@gordwarren2061]

Can you do a video on Ford 4000 pto will not disengage

[@CanadianRedneck15]

I can only do videos on what comes in for repair and I haven't had a 4000 with that problem. I did a video recently on a 3000 clutch that would be pretty similar. You will likely need to replace the clutch assuming it's the 2 stage type. Thanks for watching!

[@gordwarren2061]

Canadian Redneck Do you have to spilt tractor to access clutch pack and related parts

[@CanadianRedneck15]

@@gordwarren2061 I believe you would be able to get to the clutch pack by lifting the hydraulic lift unit off the rear case.

[@gordwarren2061]

@@CanadianRedneck15 Ok thanks Gord

[@parvezalam9573]

Parts shop video

[@CanadianRedneck15]

Absolutely, that is no secret, I run a tractor parts shop and do repairs in my spare time. Thanks for watching!

[@PUBG-sx4un]

ارجو ان تضع ترجمة للغة العربية

[@CanadianRedneck15]

That would be awesome bud, thanks!