Old iron gittin some long overdue love. Take care & stay safe.
@louisbabyCT Жыл бұрын
I love the safety clamps, well done buddy. Most guys just stuff a block of wood under and hope for the best. Safety first... Great video as always, weekend complete....
@jimurrata6785 Жыл бұрын
Cool! Nearly an hour of tractor maintenance. Try to find a muffler with domed ends so there's no seam to hold water. Here in the US we have cheap glass packs (generically called cherry bombs) I'm interested to see what you come up with for auxiliary lighting. (Edit) It's also interesting to see the difference in the European digger and rear outriggers. Sliding boom looks like it could dig a lot closer backed up to a wall or other obstacle
@jimurrata6785 Жыл бұрын
Good to see the old triple nickel getting a little love. ❤
@asbjrnkvisle5831 Жыл бұрын
I bought a 12 volt oil change pump from JULA for my inboard boat engine. Firstly to pump the old oil out, but found it much easier to fill the engine with new oil too usingthepump. Just rinse it out with diesel between the old and new oil.
@keithbonillaobando8678 Жыл бұрын
You are a literal godsend, my friend! I'm also in the process of restoring an old 555 backhoe and I used this video as a guide. Cheers from Puerto Rico!
@mariusz1045 Жыл бұрын
It's not a car muffler:) This is factory stuff. I have the same in Ford 4610 tractor '88 model, which is basically the same in "tractor" part of this machine (same engine). For the same reason the fuel tank valve is hidden in the strange place. About oil my owner's manual recomending 10W30 (M2C-159 A/B), 6,6 liter with the filter. Same oil goes to power steering (not ATF!). In my case same oil goes also to the gearbox and rear differential which is also the reservoir of tractor hydraulic. I don't know if it's the same with machine with torque converter, I have manual 8x4 synchromesh transmission. Now I'm looking for backhoe 550 or 555 so that's why I'm here;) Good luck and regards from Poland!
@Jan__R Жыл бұрын
I agree. Our 1984 Ford with the same engine has the same muffler as well.
@manganet118Ай бұрын
Witam, posiadam podobną koparko-ładowarkę z 1977 roku i szukam innych posiadaczy/użytkowników celem wymiany informacji i doświadczeń n/t tego sprzętu. Pozdrawiam.
@NBMBC40 Жыл бұрын
Great work really enjoyed that video, looking forward to the next.
@kevinmic674010 ай бұрын
Great effort in making the supports, the original support was only layed on top of the rod, and the loader dropped on it.
@ruaraidhmcdonald-walker9524 Жыл бұрын
Very satisfying!
@SluSharkND Жыл бұрын
Who would spend an hour watching a guy change fluids on an old tractor? This guy. I may go back and hit some highlights again...
@KJOff-Road Жыл бұрын
Good to know :) Thanks for watching along!
@tomasrom9073 Жыл бұрын
The low viscosity engine oil you drained and the refilling of steering oil points at the servopump leaking oil into the crankcase, It is very easy to replace those seals.
@KJOff-Road Жыл бұрын
Yeah. there might be somthing going on. I will have to keep an eye on it
@mady383 Жыл бұрын
32:52 I was afraid you'd bypass the oil pan. 35:16 Oh, it rained in the meantime.😆
@metricstormtrooper Жыл бұрын
Somewhat interesting, I thought it was REALLY interesting, I'm glad you were paying for the oils, Not Me.😁
@FAR2G Жыл бұрын
That washer on the outer filter - i'm crying laughing ahahah
@keithwarkentin8 ай бұрын
One thing I would mention that is very important when servicing your triple nickel is the drive shaft going from the crankshaft pulling to the hydraulic pump. It has 2 universal joints on it and it turns always and it’s not easy to get to and if it goes your hydraulics are dead so it’s important to maintain! You can grease the rear universe joint right at the crankshaft pulley you’ll see it just below the radiator and you might have to bump the starter to get it in the right position and then the front u joint can be greased by taking the grill off and on my 555 I grease it blind so I feel around deep under the hydraulic reservoir and once again you might have to bump the starter to get the zirk in the right position and make sure the when you’re pumping the grease gun the grease is actually going in the u joint and not just making a mess I always listen carefully and when the u joint is full of grease it makes a few crackling sounds then you can be sure it good to go! And you might want to check the fan belt because it’s much easier to change when you’re servicing the old girl rather than when you’re out in the field! 😀🇨🇦
@andrewk6844 Жыл бұрын
That engine oil may have diesel in it , leaking from injector pump .tip when greasing front axle pivit take weight off axle so the grease will get to top of pin.
@KJOff-Road Жыл бұрын
Yeah, it could be. I will have to keep en eye on it. :)
@chrisrhodes5464 Жыл бұрын
I would just weld a nut on top of the old bolt it should work just fine
@hartleyhore9040 Жыл бұрын
Hi I’m new to this channel, great vid , I had the earlier model , the 550 , nice machine , interesting oil that came out of the engine , I noticed someone mentioned power steering leak , I would say , by looking at the vid , it possibly will be the injector pump , leaking diesel, there’s a small seal on the end of the pump , that goes hard over time , especially on the old kit , I’ve replaced many on my old girls , if you still have the old diesel kicking found give it a sniff you will soon tell , if it does smell of fuel then don’t run her to long like that our you will run the bearings in the motor . Look forward to more vids 👍👍
@kevinmic674010 ай бұрын
Might be a little difficult getting to the fuel tap, try getting at the bolts that hold down the fuel tank, great video, i enjoyed it because i had been there and done that. Thanks for posting.
@romanpopowicz543711 ай бұрын
Dziekuje za super film.Posiadam tą bardzo wdzięczną koparkoładowarke ,jestem bardzo zadowolony. Pozdrawiam serdecznie!
@manganet118Ай бұрын
Witam, mam podobną koparko-ładowarkę i szukam innych posiadaczy/użytkowników celem wymiany doświadczeń oraz informacji n/t tego sprzętu.
@ericwilkes238Ай бұрын
I just bought a550 with the vertical stablizers slid backhoe ..hoe works just wont swing from left to right@manganet118
@iamrichrocker Жыл бұрын
do you plan to expand and build a larger barn/shed for your storage and projects? working in inclement weather does present challenges most unpleasant..and purchasing a lift when economic sitaution is viable? btw the vidoe and sound quality are fantastic..am sure your editing is a major time consumer, but sure does show in final product..look forward to more content, you are one of my favorite channels..
@KJOff-Road Жыл бұрын
Yes! I do plan to expand! it is one of my current goals :) So i'm slowly working towards starting that project. there's just a few things i have to sort out first. And thanks a lot for your positive comments. i really appreciate it! :)
@johnlovingood1207 Жыл бұрын
Hey. Great episode. You may want to check Captain Kleeman's video series on the Ford 555.
@jefferyhubbard9591 Жыл бұрын
Always make sure you can get fill plug out first before draining your fluid
@CaptainOatTV Жыл бұрын
I really like your videos. Regards from France!
@thesmokinggent499Ай бұрын
Good show
@einfelder8262 Жыл бұрын
Would it be a good idea to retract all the cylinders to keep the chrome out of the weather? You have the space available. Keep an eye on the engine oil level - looked like it might have had diesel in it.
@KJOff-Road Жыл бұрын
Well, yeah. it would. but it's just not possible to retract them all. as some of them move in, there will be others that move out. And yes, i will have to keep an eye on that oil :) Thanks for watching along!
@daveharper5655 Жыл бұрын
From what I was able to see I think that maybe some biocide in your fuel tank might be helpful. It was difficult to see what it looked like and it can be mistaken for dirt. Biocide in every tank of fuel for a while would be prudent. You no doubt already are planning on changing hoses and I think it should be a priority so you don’t spew hydraulic fluid into the environment and it is a pain in the cahones to have a hose break on you in the middle of a job and have to fix it on the fly. I subscribed and look forward to many more videos. Be well sir.
@trevorcourt1403 Жыл бұрын
I really enjoyed this video 👌🏻
@pastorkeri Жыл бұрын
Hope you got the prop shaft
@ianpumphrey5041 Жыл бұрын
Did the PAS oil find its way into the crankcase?
@KJOff-Road Жыл бұрын
Not entirely sure. i will have to keep an eye on it
@TheD777777 Жыл бұрын
Hi, i see that you use a lot of stuff from Biltema. How is your experience with their quality? I am currently in Sweden and honestly, i am amazed what you can find in there.
@KJOff-Road Жыл бұрын
Yeah, i do get a good bit of stuff from there. Main reason is, that the store is fairly close. and it's really the only store in the area, that has a lot of these things right in stock, for quick pick up. But ofcourse, the quality of many of their things, is in the low end/China stuff. So really, it all depends on what im doing. whether i can make do with the cheap stuff, or if id rather spend the time/money to get the good stuff.
@LogitechXibanga Жыл бұрын
i want to paint your tractor to make it look good :D just to take away those rust spots i know it will get srcatch again but you know astetichs
@jhoodied4861 Жыл бұрын
Thank you for this video. It helped.
@combinationofthis56898 ай бұрын
Hi, really enjoying the 555 video series as I'm keeping my eye on the market for same machine. I'm located in EU as well and would like to know from where are you sourcing your replacement parts?
@darren.hilldrup9 ай бұрын
Dont t use adjustable spanners unless you have to, they don’t fit great unless it’s a huge nut/boot.
@MadslyngsoeАй бұрын
Meget fin video. God klipning, gode kameravinkler, gode forklaringer. God introduktion for én der har købt en lignende rendegraver (ford 655) uden at have ret meget forstand på motorer🙂
@KJOff-RoadАй бұрын
Mange tak :)
@ΔίόνύσήΣτάύρόπίέρράκός10 күн бұрын
Θελω μια πληροφορια σχετικα με το μηχανιμα τη βαζεις στο σασμαν λαδι η βαρβολινες και τη νουμερα π χ 10w30 σας παρακαλω καποιος να μου απαντηση εχω το ιδιο μηχανιμα
@hugolafhugolaf Жыл бұрын
Plot twist : the oil was actually last changed on April 18th, 2012.
@ercomarimports49469 ай бұрын
Great video thanks
@codymac6528 Жыл бұрын
I just bought a Ford 545, my first tractor. This video was very helpful. Will the Universal Tractor Fluid serve as power steering fluid as well? I believe it will but if you know, let me know. Great video!
@KJOff-Road Жыл бұрын
It's what i have in there, right now. and it's working just fine. Thanks for watching along!
@MadslyngsoeАй бұрын
Does the liquid cooling system not have a filter?
@KJOff-RoadАй бұрын
Nej. der er ikke noget filter på køle systemet. :)
@LassePetersen-x9x5 ай бұрын
Super fed video, har samme maskine og suger info til mig 👍 Hvilken olie fylder du på servopumpen? Ser frem til flere videoer om denne maskine 🤘
@KJOff-Road4 ай бұрын
Servo pumpen får den samme olie som resten af hydrauliken på maskine :)
@LassePetersen-x9x4 ай бұрын
@@KJOff-Road Det er super.. Mange tak for det 👍🤘
@ΔίόνύσήΣτάύρόπίέρράκός21 сағат бұрын
Τι λαδια δηλαδη ας βοιθηση καποιος και εμενα ποιο λαδι@@KJOff-Road
@jackrichards1863 Жыл бұрын
Oh come on. 1: park with the rams inside the cylinders to protect the chrome stick. 2: you never fixed the muffler thats full of holes. 3: I'm sure there was another item in mind? Anyway that should about do it for now. Just n case! when you have a sometimes used bucket and crowding the bucket up is done to save the rams. It's a good idea to drill a 3/4" hole in the lowest area in each corner of the bucket (so 2X) then to get a few coats of paint on it so it will drain without help and not rust.
@KJOff-Road Жыл бұрын
The video is almost an hour long. i could hardly put more in this one. Haha :) But don't worry, i will be doing the other things as well. Also, you are right about putting a few holes in the buckes. But unfortunately it's too late for these buckets, as they are allready rusted out. So they will need a bit of welding, before i have anything to drill holes in :)
@rienkhoek4169 Жыл бұрын
Why on earth would a rear axle need 33 liter of oil?
@fishaussie9112 Жыл бұрын
🇦🇺👍
@Jörgensmaskiner Жыл бұрын
Varför Ford? Jag köpte en Hydrema 807 istället... Mycke bättre maskin...
@KJOff-Road Жыл бұрын
Hydrema er Meget bedre! :) Men de er også meget dyere. og jeg skal ikke grave ret meget, så det ville ikke give mening at købe en Hydrema. Den her var både billig, og tæt på hvor jeg bor. Så derfor blev det bare en Ford :) Tak for du kikker med!
@Jörgensmaskiner Жыл бұрын
@@KJOff-Road vad kostar en Hydrema 807 i Danmark? Jag gav 150000 för min här i Sverige
@KJOff-Road Жыл бұрын
Typisk koster de omkring 150000-200000 (SEK) men den her Ford, har kun kostet mig 60000 :)
@Jörgensmaskiner Жыл бұрын
@@KJOff-Road ok då förstår jag varför du köpte Ford... En Ford 655 4wd kostar 30-80000 här i Sverige
@ShanGamer1981 Жыл бұрын
That muffler isnt original water is getting into it
@LogitechXibanga Жыл бұрын
@TeamArmyTrucks you forgot to put AMERICAN filters 🤣
@solonglaurence7 ай бұрын
Great Video I have the same tractor that has lost power Im thinking tranny oil filter. Thanks this will help me in changing the fluids. Good job