Ford Edge Sport 2.7 Purge valve replacement 💥 P144c Engine Code 💥5 Minute fix 💥TNG Eps #93

[@canberkkaya8099]

Thank you! I just changed my purge valve and erased the code. Filled up my tank and started right away! Apparently I saved 300$ just by watching this video 😊

[@ThezNutzGarage]

Glad I could help

[@timcollazo3077]

Thank you, Sir...just had to switch mine out this evening and followed your instructions for a smooth replacement. It didn't take any time at all...thanks to this video I was able to save time and money!

[@ThezNutzGarage]

Your very welcome.

[@shelleymurphy1966]

Thank you, thank you, thank you! This video saved me hundreds and although my husband and I took more than 5 or 10 minutes, it was a Godsend!

[@ThezNutzGarage]

You’re welcome. God bless.

[@gregsteinfeldt605]

I found online info from 4 sources stating that cost is 80-170$…. Moreover some say just the parts are 100$…..and one estimate someone received for 193$ parts + 387$ labor! Mailing a gift card for Dairy Queen, Cracker Barrel etc, to you for saving people this much money in honesty is not a bad idea! :)

[@jonvandyke1059]

Great video thanks! Only thing I would suggest it to put the oil cap back on BEFORE trying to put that second engine cover bolt on. Ask me how I know. 🤦‍♂️. 😂😂

[@ThezNutzGarage]

Thanks for the tip and thanks for watching.

[@howie1020]

I noticed that. Why leave it open?

[@scottmpinkerton]

Thanks for the thorough video. I'll be doing this once the part comes in!

[@HossBoss-pl1qc]

Great video, good data. Thank you.

[@tuckerdorf1142]

Thanks for the video!

[@kenmoats3654]

Did you use an OEM part ?

[@jmrovner]

Thank you. Just changed out in a 2019 Ford Edge ST today. Total time of less than 5 minutes. The check engine light did not come off yet. Can I reset without a computer or taking to the dealership?

[@alanhoy5347]

Has to be reset by a obd2 scanner

[@WilliamSpinney]

Nice video thanks

[@faybal2517]

Hi plz I have the same problem with my car ford Fusion 2013 1.6l....p144c evaporative emission system purge flow performance during boost.. please Any solution??? thanks

[@snoopdog970]

Good video. My 2020 Edge ST just kicked P0496 Purge flow high. My understanding this code is also related to changing the purge valve cause it is stuck open causing high flow. Mine has over 100k. I let you know if it fixes this code. I looked at it earlier and it looks the same as yours to replace.

[@elenim9912]

Did this fix your issue too?

[@snoopdog970]

@@elenim9912 yes no issues since.

[@Dcr743]

Thank you! I am in the same situation with my 2020 Ford Edge ST. The dealership gave me the right part for the wrong Edge model. So I've got to get the right part and will be replacing it. Hoping for the same positive results.

[@snoopdog970]

@@Dcr743 I went to a local oreilly’s and purchased a ford part.

[@kyotodreams3306]

Thank you brother

[@ThezNutzGarage]

Your welcome

[@nickjones2932]

Hey please answer this, I have a strange thing happening, my car randomly shakes, I have a computer and I see evap 0.090 and 0.060 failure as well as purge flow monitor failure too. It shakes after I fill up gas and come to a stop then it goes away, but today I didnt fill up and it did the little shake and goes away then comes back. It’s weird it’s on and off with a small shake when I’m on the brakes. Do you think it’s the same thing ? Because I did see another mechanic say it was the purge control solenoid when someone reported the same issues as me. Are those the same parts?

[@ThezNutzGarage]

I think that car did what you are talking about.

[@umich09]

Great video! Do you happen to have a link to the part you purchased? Thanks so much!

[@ThezNutzGarage]

I bought it from Autozone

[@Anthony-hw4lt]

Did you have to disconnect the battery before you did the job?

[@ThezNutzGarage]

I probably did but I really don’t remember.

[@douglasmount188]

Any return of this CEL? Just wanted to see if the Dorman part stands the test of time. Thanks.

[@ThezNutzGarage]

So far on both of my cars they are working fine.

[@eaglelubricants]

When is the 78 F350 coming off the back burner?

[@ThezNutzGarage]

I am going to start working on my rear leaf springs. That might be this Sunday. I need to find my bolts or order some new ones.

[@amandanapper1806]

Will this work on a 2016 Ford Edge sport? Thank you.

[@ThezNutzGarage]

I will need to double check with an Auto parts store to make sure the part is the same.

[@BorgWarnerKP39]

Hi man! one of my relatives just got an 2018 sport 2.7 with 30k miles on it, they got it on another city, in the way home the check engine light turned on (P144c), i was very sad when i found out, it is very bad if they use the car like that for some weeks? or even months? , i dont want them to spend a lot of money in the dealer to replace it but im far from them to do it, i feel bad because they got this car because i found it for them haha.

[@ThezNutzGarage]

It’s a quick easy fix.

[@MsCKR3271]

It's the weekend. How long can I drive my 2018 ford edge sport until I get it replaced?

[@ThezNutzGarage]

I went about a week before my part was delivered.

[@chazberry]

I put over 7k miles on my Edge with this code before getting around to doing this easy job, thanks to Nutz.

[@gregsteinfeldt605]

NASCAR Fast! Share with people how much a shop charges to do this! I will down below.

[@adamvilla5897]

I just did mine. However the check engine light is still on.

[@ThezNutzGarage]

Did your reset the computer/ clear the codes?

[@Drolly95]

The dealership quoted me 260 dollars to replace this part today…I was like yeah NO…😅😅😅

[@ThezNutzGarage]

The quoted us $850 to replace the one on our edge. Heck it takes 5 minutes to do the job. SMH

[@ThezNutzGarage]

Thanks for watching!

[@Troy_21-g8r]

You got the link to the part?

[@ThezNutzGarage]

www.ebay.com/itm/324919744923?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=umntWYbwRLi&sssrc=2349624&ssuid=VvjpB7nxTOa&var=&widget_ver=artemis&media=COPY

[@rebeccab.5675]

The link doesn't work any more. Do you have the name of the part?

[@kenmoats3654]

Did you use an OEM part ?

[@ThezNutzGarage]

no Autozone part