Ford Explorer molding kit WKT D1843 from PRP by Alfredo’s Auto Glass
Пікірлер: 96
@lltoolbox4 жыл бұрын
After over an hour of watching bad videos, I found yours. This was very well done. Thank you for sharing.
@METALLICA1ROCKS4 жыл бұрын
I cannot THANK YOU ENOUGH for this video. I just got a quote of $532 to replace this piece. I spent maybe $100 and put this in myself.
@voltron99494 жыл бұрын
Where did you get your parts from.
@METALLICA1ROCKS4 жыл бұрын
@@voltron9949 eBay. Looked up the mouldings piece and they sold kits.
@AngelGarcia-mr4pl3 жыл бұрын
Hope it last...so far i purchased 2 and they both still flew off. 😭
@mikesloss35754 жыл бұрын
Great Video. I lost my trim piece on the highway 4 months ago due to someones improper installation. Your video IS THE ONLY one to give me the whole process and actually covered any concerns I had as to installing it. Thanks to your video I completed the installation securely and $aved me lots of money over the Dealer price.
@cassiebarnett95834 жыл бұрын
Same! Thank you!
@djatomic753 жыл бұрын
Same here. Had my windshield replaced and instead of replacing the busted clips, they just used silicone and the trim flew off on the highway.
@mattcowling Жыл бұрын
Great video and your clear instructions are highly appreciated!
@ramonortiz14984 жыл бұрын
Thank you for sharing your techniques Alfredo. Great Video!
@andrewsmith35304 жыл бұрын
Great Video! It gives me the understanding to do the job myself. Alfredo is a natural & excellent teacher!
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Andrew SMITH Thank you 😊
@jackdasipper4 жыл бұрын
@@AlfredosAutoGlassRepairCorona what kind of primer and adhesive did you use please?
@luisalbertoorozco233 жыл бұрын
The video is very good and the best thing is how you remembered the molding with urethane so that it does not smell because those explorer moldings can give you greetings friend.
@aaronwalker86704 жыл бұрын
You Sir simply are the best.. From start to finish process, best I've seen.. thank you!
@KrisNativeThai4 жыл бұрын
wow, excellent detailed work! so professional!
@andrewsmith35304 жыл бұрын
Follow-up: I posted a comment a couple of weeks ago complementing Alfredo on his awesome instructions on how to install the Ford Explorer molding kit. I just finished the installation today with great results! Thanks for the info and video, Alfredo! :--)
@MBeeezzy3 жыл бұрын
Did you use any adhesive?
@blackrifle39322 жыл бұрын
@@MBeeezzy have you found out what to use yet? I’m about to install mine and have the same question you have. I saw someone used Velcro. Not sure that’s a good idea.
@MBeeezzy2 жыл бұрын
@@blackrifle3932 it s my sister's car and we didn't use any adhesive. The clips snap in and held it just fine. Now I have to use some silicone adhesive for the side panel with the door code on it. It's falling off. Ford could use a re-design, this is ridiculous.
@MBeeezzy2 жыл бұрын
@@blackrifle3932 there are a couple you tube videos that were real helpful.
@blackrifle39322 жыл бұрын
@@MBeeezzy thanks. I should have listened to my wife and got the 4 runner for her lol
@kprice3992 жыл бұрын
My Driver side molding just flew off on a trip & now I need to replace it. Thx for the help.
@bradfooken86633 жыл бұрын
Did our first one this morning, thanks for the video
@Abe-jx9rp3 жыл бұрын
I love watching your videos man I work in autoglass too and it nice to see other people doing amazing work keep it up man.
@stevejobs23734 жыл бұрын
I need more uploads!!!!! Love your videos I've watched them all
@jaagsllc3 жыл бұрын
Great video Perfectly explained. Thank you.
@giovannifiorentino8947 Жыл бұрын
Alfredo, very detailed video. Can you post the link for the molding in the description?
@Tempsho4 жыл бұрын
If you don't break the base or the clips while taking it apart, you can just get the outside trim pieces: GGG 1843 S KIT
@jameschapman1324 жыл бұрын
They also make them for the police explorer hole for spot light already in molding. Great video
@HerbalInfuser4 жыл бұрын
What about the rubber weatherstripping that goes around the entire windshield? Where can I buy that?
@marcichaparro16232 жыл бұрын
That comes pre installed on the inner piece
@ML-ec2hv2 жыл бұрын
PLEASE LISTEN to this man when he says put the top in first after sliding the bottom in to make sure it fits. I did not do this and tried to remove my panel and it snapped in two. Thank you for this video!
@sjepson1004 жыл бұрын
Thanks for the video. Now if only I could find someone like Alfredo that I can trust to do a good job of it. I don't know if the windshield was replaced or even properly installed from the factory. I bought my used 2017 Explorer Limited and a week later this part flew off going down the highway for apparently no reason. I do see that there were very large globs of black glue used on it before. Golf ball diameter +. The blot on part is still on the car of course, but clips are broken off and the outer part is somewhere on the highway.
@ashleykleineck1824 жыл бұрын
Mine is a used 2016 Limited and same thing happened to me! Ridiculous to buy something and this happen. Only my dealership had sticky squares like command strips to hold it. At least yours used glue 😒
@artyberkhoff88783 жыл бұрын
Very helpful thank you.
@pauloaneiros96324 жыл бұрын
Great video thabks, could you please send the link where I can buy this item, just need the driver's side, thanks
@tedfritsch33403 жыл бұрын
Thanks for this video Alfredo. Really helps. We lost the drivers side in a snow storm and just now got the part. Wish I had seen this before I bought the single one from Ford for our 2013. Thing I noticed on the old one is they have some kind of Velcro at the base. So the replacements are using the adhesive instead? What would a DIY'er use for adhesive?
@HectorMartinez-ub3bx4 жыл бұрын
Where can I get the primer ??
@MrRockydee07 Жыл бұрын
My ex police has holes from the removed spotlights I need to replace the outer and inner molding, how is the inner done , Thanks
@noahpuryear87552 жыл бұрын
You actually don’t need glue. If you just get the 2093 molding and install it without glue, you’re good to go. I have never had problems with it
@daxverleyecpa12393 жыл бұрын
Can you provide a link or comment on the primer and urethane used to bond the 2 pieces. I know that by doing this if something happens you are going to have to replace both pieces in the future, but would rather do this than have it fly off!
@blackrifle39322 жыл бұрын
Have you found out what urethane or primer to use?
@daxverleyecpa12392 жыл бұрын
@@blackrifle3932 unfortunately I have not!
@rosalimones46224 жыл бұрын
Alfredo where di you buy the pieces and how much it's my 3rd time loosening the trim on my explorer
@truckingwithtobee4 жыл бұрын
I have a 2017 explorer limited and ALL of the molding is coming off! I’m so pissed
@eduardojimenez20443 жыл бұрын
So has mine. I'm 56 and this is my first American car. I thought I'd give Ford a chance, but so far with only 15,000 miles on it I've had the windshield stripping come off, the front edge of the hood rusting and paint peeling off, rusted fuse box relays, and the problem with the exhaust fumes coming into the cabin, despite the "complimentary service" the dealer gave the car to plug a few holes that supposedly caused the problem. So much for "quality is job 1"; this Explorer is my first and last American car.
@cujbj12 жыл бұрын
Did the rubber trim around the windshield come off on yours? Mine did on my 2018 now I get a horrible wind/rattling noise above 40mph! Dealer quoted "at least" 1200 to fix!!! On a three year old, $45,000 vehicle?!?! 😡😡
@yungstrawhat45132 жыл бұрын
@@cujbj1 I get that same roaring noise on my 2017. From a video I seen on KZbin, some guy says you have to remove your windshield to fix that problem. Have you got the noise fixed yet?
@GraceBaboukisYT3 жыл бұрын
Thank you. I am going to try to do this today. I have the same parts. Question, if my parts came with the butyl tape already applied do I also need to use urethane adhesive and primer?
@ccMomOfJays2 жыл бұрын
How did the replacement work out for you?
@rosadelacruzcarrasco3187 Жыл бұрын
Donde puedo conseguir las molduras para ford explorer 2015
@castilloradames3 жыл бұрын
Where is your workshop? , I need to do that to my Explorer 2015
@brandondeleon5529 Жыл бұрын
What function does the primer do and which one did you use?
@RCSxMaverick7 ай бұрын
what brand of urethane adhesive do you use? Will a primerless adhesive work just as good?
@AlfredosAutoGlassRepairCorona7 ай бұрын
I personally use Betaseal Xpress30 it does use primer 5504G. Primerless urethane is primerless to glass only not to plastic. You would still have to use primer if you really want it to bond properly. You can also use U418 urethane which is solvent based and should bond to rubber and properly prep plastic.
@hankdrabczak68562 жыл бұрын
What is the warranty of the replacement part. labor and material.
@randalramsey6056 ай бұрын
❤️❤️🏴☠️❤️❤️
@tylerh67892 жыл бұрын
What about the important part. The removal?
@voltron99494 жыл бұрын
Questions im in need of this parts but I went to the PRP web i didn't see anything cam you please help.Thanks
@saqrawii2 жыл бұрын
Where can I find that clips for install windshield molding?
@islahislah22023 жыл бұрын
Do you have link for those parts..? Thank you
@IdahoATVlife4 жыл бұрын
Using urethane on the interior molding? Factory molding are with Buytl only? Is gonna suck for the next installer who assumes that their is just urethane connecting the two pieces with clips. Why did you use glue and not buytl tape like factory?
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Street Glide Life it’s required by the manufacturer to use urethane. Ford uses epoxy right from the factory on 2015 and up due to the moldings flying off. That’s why there is a kit for upper and lower molding. Google it or ask the manufacturer to confirm.
@IdahoATVlife4 жыл бұрын
@@AlfredosAutoGlassRepairCorona that's weird the precision or ggg kits include a strip of pre applied buytl. never seen them come plain like that. Very interesting. Thanks for sharing your knowledge, stay safe.
@jazzzy23733 жыл бұрын
Hi what kind of primer did you use?
@Chris-gw4zp3 жыл бұрын
Like safe lite do something like this?
@Lambo-fe6bf3 жыл бұрын
Replacing windshield can't you use your existing molding???
@djatomic753 жыл бұрын
The clips and the inserts on the molding typically break off when removing to replace windshield.
@indianjoe34933 жыл бұрын
Anyone have trouble installing their driver side panel? When it came down to installing the trim the top portion is slightly sticking out after a few try’s. The passenger side went like a breeze. Thanks 🙏
@jackieguerrero4243 жыл бұрын
What’s the link to the website
@ashleykleineck1824 жыл бұрын
What type of primer did you apply to the bottom? Can it be any adhesive primer?
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Ashley Kleineck sorry for the late reply DOW 5504G
@jaimepabon86223 жыл бұрын
Where can i perchase it ?
@king211094 жыл бұрын
Is it necessary to replace the plastic cover too?
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Juan Arevalo yes
@king211094 жыл бұрын
@@AlfredosAutoGlassRepairCorona Mannnn I should had bought the hole package. I thought it'd wouldn't have been necessary..
@king211094 жыл бұрын
Thanks bro..
@MBeeezzy3 жыл бұрын
@@AlfredosAutoGlassRepairCorona I have to replace these side pieces for the windshield. Do I need to use an adhesive?
@AlfredosAutoGlassRepairCorona3 жыл бұрын
@@MBeeezzy yes you’ll need to glue them down with urethane or epoxy.
@grumpysgarage47904 жыл бұрын
I wonder if there is a glass technician in the NY/NJ area that does same the type of quality glass installations that you do. Not really impressed with the glass installations I have seen by the mobile truck outfits, as the windshield is an integral part of the vehicle safety structure. And I don’t like leaks and moldings popping off.
@cindiaz16284 жыл бұрын
Where can you order the moldings??
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Cinthia Diaz email me I could help you get them. alfredosautoglass@hotmail.com
@glassman15494 жыл бұрын
Just get the 1843 S4 kit. Done and done
@pauloaneiros84824 жыл бұрын
you guys know whether Gorilla Glue Primer works or not? Thanks
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Paulo Aneiros no I would buy a urethane primer if you’re using urethane
@mikeysworld47204 жыл бұрын
Mine flew off today on the highway
@Movieman19653 жыл бұрын
That's how I lost both of mine as well! Sucks! I haven't put new ones in yet because I'm concerned the highway winds will rip them off again!!!
@MannyScans Жыл бұрын
You forgot to cover the top hole that was previously a spot that was hole for the OEM molding clip. The better kit comes with a rubber gasket to cover it. That truck might have water damage in the future.
@jlillieify3 жыл бұрын
Holy knights of columbus, that kit from PRP costs $415. They dont even have it in stock. I'm going with the Doormans off Amazon for $220 both sides.
@RCSxMaverick7 ай бұрын
Cheaper than the $1100 the dealership wants to replace both
@meleroatl86024 жыл бұрын
stupid ford design👎
@32srt32 Жыл бұрын
why did ford make this terrible cover!
@bigskyguyatjuno4 жыл бұрын
These Ford Explorers are pieces of CRAP! Interior door molding delaminated, this windshield molding blew apart driving down the highway. Molding under the hood made a loud roaring sound driving down the highway and cost hundreds to have them fix a "Factory Defect!" VERY poorly designed plastic junk with very sloppy engineering.