Ford F-250 Bolt-on Upgrades - NAPA Perfect Additions Truck Part 2 - Stacey David's Gearz S9 E2

[@BackPainGarage]

I can appreciate that shows like this are what I grew up on watching on the weekends. But man am I so thankful for better "shows" out there like Vice Grip Garage that are real and authentic. I'll always like Stacey's videos, but all they are is a 20 minute long commercial more or less.

[@BoostedPastime]

the budget these guys have is usually more than the average joe can afford, love watching smaller channels because sometimes these get depressing, its good to see them tackle more down to earth projects.

[@mattshansen9814]

Vice grip garage.......... Better.....,..That's your opinion. Stacy David keep up the good work 👍👍👍👍👍👍

[@mattshansen9814]

Maybe you should boycott the show..... I guarantee you won't be missed...,.

[@BackPainGarage]

@@mattshansen9814 Neither will you buddy. I'd wipe my ass with your opinion if I could.

[@Vincent-ke5zn]

Very cool and original design on your project truck

[@ghost13829]

love this show man! been watchin ya for many years

[@tobygathergood4990]

So far on this build, I figure it's cost somewhere between 12 and 15 thousand $$$ to get there. Living in Canada, this would be at least 50% more than that, and you're adding even more stuff. Your definition of "a fortune" is considerably different than mine, that's for sure.

[@Goostradamus81]

I understand the aspect of showing what you CAN install in a truck. But there was alot of money spent on the generator/compressor in the back of the bed, why did they then install another compressor for the air bags? When they could just run a dedicated line off the air tank, or just fill nozzles for the bag Also for the few extra dollars of the tiny compressor, why not save that and do a full turbo-back exhaust system. Love the show, just a few odd-ball questions Cheers

[@NarfBLAST]

Anyone else at 14:00 think, "But you already have an onboard air compressor?"

[@jamesfitz1227]

NarfBLAST yea

[@scotts045]

I’d just run lines out the back so I can justify the $1500 air compressor lol

[@BigPaco213]

Finally a full Episode!!!!!

[@wadecookston1605]

When cutting exhaust, you could say, “there’s more than one way to skin a cat(back)” lol

[@armandopatane5343]

Once again you make everything look simple

[@davidgenthnerjr4995]

Great video Stacey, been waiting since February for full episodes of season 9 to come out. That big shop crane you use for projects like Heavy Metal, who makes it and how much would I have to dish out for one? I got a 1979 F350 4x4 that needs a cab replaced and heavy flatbed removed and would love to have one so I don't have to borrow a tractor or skid steer with forks.

[@colehalford1893]

He sounded like my mother when he said “Oh there’s all kinds of stuff to do.” I turned my head and said “Mom?”

[@robbanta2979]

“without spending a fourtune”.... ok

[@charlesihne3001]

Good for you

[@Cpt.BEARDless]

@@charlesihne3001 hush child

[@sethmarrs3327]

he dropped that exhaust system and walked away like screw it, ill just run it with an open cat.

[@royalwins2030]

Seen pics of turbos after many miles with k and n s on them.... didn't look to pretty. Flows more air and more dirt apparently

[@trackpackgt877]

You're absolutely right about k&n I'll never run them again I had one in my old pickup truck and I send oil samples to Blackstone labs and they kept telling me I had an air intake leak because there's a lot of dirt in the oil I couldn't find an intake leak finally I ditched the K&N and put in a paper filter next Oil sample Blackstone said my oil is clean didn't have a bunch of dirt in it like before that the filter was the problem letting too much through the K&N is not worth the tiny bit of horsepower you get you're losing filtering ability

[@gt4th]

What happened to the sheet sweeper? You were putting a rear end in it and that's the last thing I can find on it. Awesome build. Dying to see it finished!

[@the_w0rkshop419]

Hi +staceydavidsgearz ! Awesome episods ! Lovme the truck even if it don't left much space ! Eon't you think that you should upgrade your cordless drill ? Why don't a usa made DeWALT brushless drill ? Or Makita if you prefer

[@KGeezydad1]

Stacey did you have modify the air lift system since you installed a lift kit?

[@jennBourne]

Is it just me or did he add the new lift blocks to the factory lift blocks?

[@bobbymatheson5807]

Stacey David is putting things on this truck that people might want to see but at what price ? And Napa is 1 of the most expensive to buy auto parts around ! Just how much where all those tool poxes you but on that truck ? I can guarantee they cost more then average guy can afford ! And along with all the other things you put on this truck !!! A guy like Vice Grip Garage is more based in reality then this !!! Vgg is more of a real man's needs and budget .... this show just reminds me of a rich man's play ground then a reality show on how to build or improve a working man's truck !!!!

[@bassmatt4792]

Wouldn't be a Stacey David automotive tv show without throwing old parts into a pile on the floor

[@tobygathergood4990]

I'd love to see this done on an old '88 to '92 7.3 IDI naturally aspirated F250, mechanical IP and NO electronics.

[@truckersnitemare9354]

I've seen that truck around Texas

[@contralul]

1.25 speed on the intro sounds perfect

[@tylersmith293]

Love content. Now you have no bed space.

[@hulkincredible3155]

how about doing a 2001 Chevy Blazer zip update 4.3 I'm making a cycling motor I would like to my money hasn't been as their

[@waynes.2983]

K&N's are for racing because they let dirt pass pretty badly. In racing that's ok because engines are rebuilt regularly. Don't use K&N in your daily driver.

[@markrich3271]

You would think the oem setup would take in colder air from the fender.

[@well_as_an_expert_id_say]

Mark Rich more chance of sucking in mud or water and hydrolocking the closer to the wheel well

[@markrich3271]

Didn't think about that your right.

[@zachtheripper124]

Lol. 120 horsepower and 240 torque with a tuner? If only it were true.

[@joebufford2972]

All of the way Stacy was doing a makeover on his brother pick up. It's like dudes. You got to change this and that and then you get some chicks!

[@diggLincoln]

6.4 powerjoke worst engine of all time

[@LayzeeGiant]

So much $$ sunk into the worst diesel ever made. But hey, it’ll look nice on the rollback lol.

[@shaun710]

My thoughts exactly

[@Maleekus]

it's common knowledge, or so I thought, that the 6.2L GM diesel was the worst diesel ever made

[@mamoudoundiaye9788]

Why he called him Steve Erwin

[@zacharygras]

Best way to get the exhuast off on bolt everything and kick the shit out of it works everytime

[@peterdragon6367]

Wish it wasn’t a 6.4

[@josephf593]

Your keeping the dpf on the wrong vehicle..

[@Grainsauce]

Ya there is no way you get 15hp from any k&n air intake maybe 5 at the most!

[@richardthompson5313]

no one can afford this stuff get real who has 40,000 to put on a 7 yo truck

[@josephf593]

Your keeping the dpf on the wrong vehicle..