Ford F250 F350 Sunroof Moonroof Glass Seal Replacement, How to Replace Sunroof Seal

PayPal for one time donations:
www.paypal.com...
You can order it on ebay, check out the best deals:
rover.ebay.com...
Replacing sunroof glass seal on a 2013 Ford F250. Please like and subscribe!
Genuine OEM Ford Sunroof Glass Seal 5L1Z7851884AA

[@joseandrade_official]

Thanks for this video. Hopefully this resolves my small leak.

[@Alex-vp1ps]

It's fun to hear a Russian song by DDT😁

[@Rick-vc4xn]

That’s what I need to do on my car a lot of places don’t want to touch it. Don’t know why is a Toyota Camry

[@literailly]

Thank you! Just replace glass with a salvage piece. Went in fine, but seal was shot. Yours is only video i could find for replacing the seal.

[@mjramster]

Followed your steps and the replacement went very quick and successful. Thank You!

[@musagencay4338]

Hello, I am writing to you from Turkey, the video is really nice, I have a 2008 model Ford C Max and I need a sunroof wick, where can I get it, please help.

[@ipartoutstudio]

Not sure a wick is

[@A1EXowns]

Mine is at the dealership now for the panoramic sunroof. The seals are bad and the price to fix it cost right at $3800+tax. I’m mind blown that a five year old truck is having this issue.

[@ipartoutstudio]

Wow sorry to hear that!. Hope they do a recall on it

[@touncy1533]

thinking i can actually do this on my 2002 svtf.. not leaking, but air flow is driving me nuts.. thanks for the non intimating vid lol on how to

[@Backfire10]

What made you replace the seal? Was it leaking? I did mine and I also cleaned out the 4 roof tubes. Nice Video. Thanks for sharing.

[@ipartoutstudio]

Yea leaking badly.

[@Backfire10]

@@ipartoutstudio check the drop tube if leak continues.

[@ipartoutstudio]

@@Backfire10 thanks. Yea we flushed them with compressed air. Some were clogged as well.

[@lilsnavelz]

You say 4 roof tubes...I cleaned my front driver front pass and still have a leak.. there are 2 more drain tubes up there?

[@Backfire10]

In all four corners

[@timothycisneros3905]

Dame good video!!!! Thank you guys.

[@reggeckmann3993]

What year? Is f150 sunroof the same. I have a 14 limited with bad gasket

[@ipartoutstudio]

13

[@michaelflaherty154]

Nice video! One tip for getting the 2 ends to fit is to fit the 2 ends together and press into place (about 1" from each end) before installing the extrusion on each side (the next 5 or 10 inches). The extrusion is designed to be a little bit too long (they usually shrink over time) so you have to compress the extrusion on one or both sides. If you can first fit the 2 ends and then some extra material on each side, you have a longer area that is getting compressed so it usually goes better.

[@ipartoutstudio]

Thanks

[@JasonWW2000]

I don't believe this type of seal has two ends, it is a single circular section with the ends bonded together.

[@RemmikRotus]

@@JasonWW2000 -Correct, the seal is a joined loop. The proper method, with any rubber seal is to never pull/stretch as you install it. I was cringing right when he started cause I knew how it would be when he got to the last part. This also can throw off the corners a bit. I applaud that he made the video though. In this case, I would have wrapped the entire seal around the frame first, even if one has to temp tape at the corners. Then try to get all four corners started (about two inches in both directions). Then go to the middle of one long side and install there moving out only one inch in both directions. Choose either right or left of there and go to the middle point between a corner and what you just installed there, working out right and left till you get all that portion in place. Repeat this on the remaining sections and it should all go in without bunching. It also helps to add a bit of silicone sealant to keep it from ever shifting and helps fight shrinkage. I work with high end doors and windows that have some crazy seals normal fenestration products do not.

[@Zanehoward88]

Great video! Thanks

[@מאורקשני]

Perfect work, well done to you, can you please help me I'm looking for rubber for the window of the car Hyundai Santa Fe 2011

[@ahmedsharafi191]

Nice work

[@Dareal6trey]

What are those latches that connect to the sunroof glass? I’d like to order them for my 06 Dodge Charger. Can you please tell me the name? Thanks. I just recently purchased the sunroof glass but i dont know the name of those parts i need to connect the glass

[@hectorchavarria633]

Great video. Need your help! do you know if the sunroof panel glasses from a 2021 F150 super crew are the same as previous year model? I know the part number changed, but cannot see any different other than the controllers... do you know? I have both panels broken and the 2021 part is out of stock with not ETA! but I measure the glass from another F150 from previous year and it is the same length! par number for 2021 is ML3Z-16500A18-A and the part number for a 2020 it is Fl3Z-16500A18-A any thoughts I will really appreciated as dealer does not help.

[@ipartoutstudio]

Sorry no idea. No way to know unless compared side by side

[@asharibshah4328]

Brother mine one is getting stucked at closed position then I force it with my hand to open it get stuck from the back the position where it goes back please guide what to do ? The body and seal when contact to each other it get stuck it's due to seal ???

[@ipartoutstudio]

Try to realign the glass.

[@asharibshah4328]

Brother mine one is getting stucked at closed position then I force it with my hand to open it get stuck from the back the position where it goes back please guide what to do ? The body and seal when contact to each other it get stuck it's due to seal ???

[@ipartoutstudio]

Might need to be readjusted. The glass. Lightly loosen up the screws and move it.

[@elliottk2518]

No seal adhesive needed?

[@ipartoutstudio]

@@elliottk2518 no it clips in

[@markchambers8641]

I’m having a hard time getting the glass leveled outside on top

[@ipartoutstudio]

You need to loosen it and adjust it 2 ppl

[@PaintingRosesBlack]

Can I do this to a 2012 focus with a moonroof?

[@ipartoutstudio]

It's very similar on all cars

[@PaintingRosesBlack]

studio ojstudies on cool. Thank you very much

[@happymonarch]

I just want to know how you got the part so cheap. I have an '06 Mariner I need to do this on, and the part is $400!

[@ipartoutstudio]

Get the factor part number and Google it

[@happymonarch]

@@ipartoutstudio Yeah, that's what I did. To order it directly from Ford would be $600! I have no idea why this part is so expensive. It's 78502A90.

[@ipartoutstudio]

@@happymonarch should be able to find it on Google cheaper.

[@ipartoutstudio]

I think your getting quotes for entire glass with seal. Try to get the seal onlu

[@happymonarch]

@@ipartoutstudio It's definitely possible, but how would you interpret this link? parts.ford.com/shop/en/us/body/glass-windows-and-related-components/weatherstrip-sliding-roof-panel-6577805-1

[@THETERPZ]

I got anxiety watching this video, this guy teaching , struggling .

[@ipartoutstudio]

Make a better one. Waste your time making a video for others to talk sh.... about.

[@bearbull88]

​@@ipartoutstudio Didn't look like you were struggling at all to me. Looked like it was pretty straight forward. Maybe to someone that never does anything for themselves it would be surprising seeing it done? Hmm, anyhow I appreciate the video, I was about to take mine into the shop but I'm going to replace this seal first. Thanks!

[@ipartoutstudio]

@@bearbull88 thank you

[@bearbull88]

@@ipartoutstudio Have you ever replaced the seal without taking the glass out? Looks like it could be done.

[@ipartoutstudio]

@bearbull88 no haven't tried