Ford Fiesta MK7 (2008-2012) Door Card Removal & Powerfold Mirror Fitting Guide

[@ajuk7663]

This worked absolutely fine with my late 2010 fiesta, got myself a £10 screw and wrench kit and used a blunt metal knife instead of a trim tool, ordered the wing mirror off amazon. The only thing I'd mention: when you're threading the new cable from the mirror into the door, there's a special canal it has to go through, otherwise the cable will stop the window from going all the way down, quite a fiddle but got there in the end. Saved myself ~£150

[@Nigel5uk]

AJ UK yeah I ran into that problem, mirror lead preventing the window from moving all the way down. Earlier it actually pulled the mirror connector out and stopped it working all together lol

[@michaelwalsh9782]

@@Nigel5uk exact same with me

[@brianneal9204]

Thank you for sharing this video. My wife's feista front windows stopped working. By seeing that the switch could be popped out, I was able to see the connector had come loose. You saved us a couple hundred dollars in service labor. Cheers mate.

[@mazikeen7265]

Oh lawd how do you get the cables through the hole in the door? Been here hours ?

[@pef286]

I'm from the USA and trying to figure out why you need powerfold mirrors. Are parking spots that narrow? I like the "anticlockwise" word. Makes perfect sense, in US we use counter clockwise. I have a Fiesta with the manual transmission. Hard to find in the US is an understatement. I watched for removal of the door panel, Thanks

[@maniacmart]

Powerfold Mirrors have heating elements in them aswell as the ability to fold automaticly. So if you push the rear windscreen demister button it'll demist/ unfreeze the wing mirrors too :)

[@kieranwalkington1998]

Martyn Briant so do the non powerfold #oldpostrevival 😂

[@cactiiokok9789]

Great Video, just taken the door panel off to check why the speaker was rattling......there was a penny inside the door panel rattling to the vibration from the speaker. By the way there were a couple of screws on the panel side as the side cannot be popped off from the plugins

[@jacktrek5851]

I know this video is years old but what size torx bit?

[@green75ish]

Did this today and some points that do not really get explained in this video: *If you have a 2011 model the door-card does not just come off as in the video, there are 2 small screws on the lower L/H side of the door that have to be removed and are an absolute pain, in the end I had to leave them in which made the remainder of the task very onerous indeed. *When you put in the replacement wing mirror threading the wire through to the correct opening in the door is a complete pain in the ass and it would be helpful if you have some sort of tongs to assist you in this task. *The window will now only close 2 thirds of the way down and I have no idea why, looking at the previous comments it seems that this is a reoccurring problem. *Make sure you have the correct tools, TORQUE screwdriver with a selection of head sizes and a suitable spanner that can get inside that little hole which houses the retaining washer for the wing mirror. Overall this video is useful but makes the task sound easy which I can assure you is not.

[@d4tjr165]

I had no problems

[@FamilienHansen]

Hmm. There were two screws in the side of the doorcard that also had to be removed. I have a year 2011 fiesta.

[@nathDOTso]

Karl, Since making this video I found it was only myself that can program these mirrors. Sorry this wasn't made clear. If you email [e-mail] I may still be able to assist you.

[@buzz185]

Hi did you upload the mirror power fold activation guide?

[@nathDOTso]

Unfortunately as it requires modification of Ford asbuilt data it wasn't possible to make a guide. I can provide modified files on fiestamk7cruisecontrol.com if you or someone you know has Ford IDS to upload the file.

[@buzz185]

@@nathDOTso Hi can it be done with forscan? Yes if you could upload it to the sight that would be great, many thanks!

[@buzz185]

@@nathDOTso Would it be possble to add the fuse box with gem modules from the car the mirrors came from?

[@nathDOTso]

I haven't tried with Forscan, it might be possible. If you don't already have the right fuse box I wouldn't attempt it.

[@focuszetec53]

thanks nath for programming the mirrors and 6 speakers, great job

[@nathDOTso]

One screw in the top (behind a little cap, like the door handle) and 2 screw in the bottom.

[@tompoole7335]

YOU ARE A FIESTA GOD! Thanks man.

[@rileythechocospaniel9754]

Hi Nathan, what would I need to do to have this activated?

[@davidmacarthur2405]

Do you need to activate the mirrors or does it work straight away

[@markfish7705]

Trying this tomorrow cheers for the video!

[@MrJordanwain]

Looking at doing the cruise control and power fold mirrors on the new st as they are not an option in England, if I had both fitted would I be able to come to you to have both programmed at the same time? Thanks

[@SongOfNations]

Hi what is the difference for fitting the non power folding mirrors please.I am about to try it myself.

[@TheMoffBoy]

If you have a 2012+ fiesta, the R2 and R3 fuse are completely different to the pre 2012 fiestas. The mirrors are controlled via a separate module.

[@DSKbangervideos]

Dave Moffatt do you know which fuses are for the powerfold mirrors on 2012+ fiesta? I haven't the r3 fuse on my 2016 st so thought I couldn't have them. But after seeing this comment maybe I can. Cheers

[@sciroccomods]

@@DSKbangervideos Hi, 2 years on, and im looking to do this on my mums 2013, how did yo get on, thanks.

[@tjctpuppets2108]

@@sciroccomods have you done this yet?

[@stewartschomberg9287]

Please explain as getting it retrofitted to my 2015 st

[@stewartschomberg9287]

@@DSKbangervideos Any reply?

[@Mathis092]

how do you activate the power fold mirrors

[@mowden85]

Hi, I had to change my wing mirror after driving it into a wall, it is not sitting flush with the door, there is a gap at the bottom between the mirror and the body work. Is there a way to adjust the angle of the sit?

[@grimmydevil12345]

Ensure you don't drop the wing mirror nut inside the door panel. I used a different nut i found to overcome the problem, but now the window does not open fully any more....

[@pata_law]

Ça m'a beaucoup aidé pour remettre la tringlerie de ma Ford Fiesta

[@gogiman5066]

Did anyone have any insight on how to make an adjustment to the mirror assembly to make it sit flush against the door? I'm getting ready to replace the whole mirror assembly on a Fiesta and the old mirror I'm taking off isn't sitting flush but I can't tell whether it is the mirror itself that is bent or a bracket inside the door.

[@lfdfdldf]

Hi Nath, have u had a facelift model yet? Is it just as easy to install powerfold mirrors?

[@nathDOTso]

I'll be honest & say as of yet no one has come to me with a new 'facelift' Fiesta or ST version so I can't guarantee compatibility. You'll also have a hard time getting a cruise control buttons that lights up blue as all scrapyards will have is the red version from the 2008-2012 Fiesta. But email me if you still want to go ahead :)

[@eugeneguy3080]

i am trying to see if i can fit power fold to a 2016 UK Kuga . I can get mirrors but would like to see if i have the right fuse box, there is 2 on kuga , one in front and one in boot area . Hope you can help out . Thank you .

[@peumyth10]

Hi, i had a fiesta from mexico ( us model ) without led signal. I can buy a mirror with LED that will fit? I saw the product in alixepress ( search Ford Fiesta MK7/ MK8 Reverse Mirror 2008-2012 ). tnxx

[@jamie-ox8sg]

so how are they activated

[@thefiestaguy8831]

Hi Nath, Seen you about on FOC Forums (my username is thefiestaguy). Just done this replacement today on the driver's side RH wing mirror, reconnected everything ok, except for one slight problem which is that the window (right side) goes most of the way down, and then stops. Once you try to go any further it makes a suction sounding kind of noise and doesn't budge. I watched it without the door inserts/cards in place and it appears when it gets stuck the rubber gromit attached to the cable itself (on the replacement mirror) seems to be sucked into the hole where it is pushed through, and I think that is preventing it from going all the way down. Currently waiting for the paint to dry on the primed plastic cover the kit came with and will then give that a second coat. Other than that, it's all gone very well, took about an hour and a half, fiddling around getting the plastic strip off above the torx screws on the door handle (not the door release), and removing the door cards was a pain.

[@paulbatchelor2442]

+thefiestaguy I assume you have already solved the problem given the time since the post but its to do with the route you have put the wire back. I replaced my wing mirror a year or so ago and has the same problem, it was the wire that was being caught by the underside of the window. The suction noise you hear is the gromit being pulled in. Take the wire out and re-lay it into a gap that is an inch or so further back and itll solve the problem.

[@thefiestaguy8831]

Paul Batchelor Hi Paul, i'll give this a go, i've noticed over the last few days that the right side indicator, electric mirror and window doesn't work, (this is the side that was replaced), i'm assuming it's an electrical related issue. I don't know whether it worked or not since I replaced the wing mirror, but it's definitely not working now. Basically seems the whole right hand side door has lost all electrical power, although i'm able to wind down the passenger's window using the controls on the driver's side, but not the driver's window or anything electrical on that side.

[@BeNnYmitsai]

hi ! witch relay's does this have ? what type ? someone as the link for a store ? thanks

[@TheXkrystalxx]

Nice, thx a lot for the help !!!

[@johnmcgrath4577]

how do i replace the drivers window regulator on a 2007 mk7 ford fiesta !

[@mikefrenchman4545]

do you know how to change the barrel of a 2009 ford fiesta?

[@nathDOTso]

No, sorry. Not something I've done before.

[@johncorbett2619]

Great video

[@MarkyCoops91]

Hello, I've emailed the address on how to activate the mirrors? I was wondering are you still able to help? Thanks

[@chemicals9820]

Nice

[@jamie-ox8sg]

so how do you activate them ?

[@hanoinguoi6927]

i want to buy motor folding mirror and cable connect on ebay?

[@warrenthomas9230]

Thank you had a coin stuck in my door made a awful sound when playing music 😂

[@davistorres3010]

@Muhammad Ernesto Shut your mouth :D

[@easysounds8260]

Still active on this? got some issues haha

[@soupnazi22]

Very useful vid, thanks!

[@Zherneb0h]

Thanks!!!

[@ramzicherni2931]

Merci de conseils

[@55emrecoskun]

i cant hear you

[@MultiTerryf]

Well explained try it tomommow

[@stk987]

👏🏻👏🏻👏🏻👏🏻👏🏻

[@nathDOTso]

Email [e-mail] for instructions

[@MrFluffyMusic]

please could you tell me how to take the plastic around the speed dials thanks

[@buzz185]

Hi did you post the power folding mirror activation guide?

[@nathDOTso]

No this did not get published as it later transpired that specialist equipment and coding was required.