Ford Fiesta MK7 - Reverse Camera with Boot / Trunk release Install

Ford Fiesta MK7 Reverse Camera Install for Android Stereo
Reverse camera with Boot release link - www.aliexpress.com/item/10050...
Check out my Video on Android Stereo install
@@ Android 10 Fiesta MK7 Stereo / Headunit install and review - • Ford Fiesta MK7 Androi...
Useful Videos that might help with install
- How Reverse camera Work - • Car Backup Cameras Exp... ( Note you don't need to connect red wire to stereo reverse cable If you have Canbus decoder with stereo )
- How to use Solderless connections - • Heat shrink solder but...
- How to use T Tap connections - • Easily attach a second...

[@RacerJames76]

My technique for running camera cables is to use the rca to speaker lead adapters available from most car audio wire suppliers. Run 2 runs of speaker lead through the grommets using a metal coat hanger or long zip tie as a fish tool. Your local home supply store should have some hard plastic tubing used for refrigerator water supply. That makes a nice fishing tool if you do this professionally.

[@FatHead1979]

Very nice. Straight to the point, solid camera work i.e. everything that needed to be clear WAS actually clear. Keep up the good work! 👍

[@MrSimonmurray]

Followed this today with a successful install. It would have been a real challenge without this guide. Thans very much

[@surjsingh1129]

keep it up very clear and informative

[@acmthere3674]

Many thanks for your time, you did beautifully.

[@ishanperusinghe]

Thank you too!

[@cockylokie7865]

Just yesterday I did this. Took the misses and and I 7 hours. Looks fully OEM and didn't need to cut anything. Its not an easy install. Oh if you use the right hand side of the hatch. It doesn't have the original wiring loom.

[@ishanperusinghe]

Yep not easy at all . Hope the video helped

[@azehtamsang7781]

great video if the stereo has a can bus do u need to connect to the reverse light like in the video

[@ishanperusinghe]

Yeah you should as you need negative still even if the car can turn on camera from stereo and switch stereo to video feed .

[@taffofwales6814]

Nice video. Going to do this on my boys fiesta. You mentioned and point to the brake light a few times. Do u need to connect it there somehow and not just to reverse cam?

[@ishanperusinghe]

It’s in the video . You need to connect the power for reverse light to reverse bulb on car . This is so it’s only powered when car is is reverse and not all the time

[@eyeseeyou68]

You backwards leave the yellow and red intact, and feed the wires up the trim them do the connection at the top

[@ishanperusinghe]

Tried that . Was still difficult to do because of plugs

[@christinethompson2269]

hi there great video ive just received the camera and head unit you linked in your other video, i received no instructions with my kit, but i noiticed you mention connecting the camera to the brake lights i wondered if it should be the revers light. any help appreciated thanks

[@ishanperusinghe]

Yes it’s reverse light wires . I have highlighted which ones they are . This is so the camera is only powered when in reverse. You can confirm also with multimeter and some putting car is revrse and taking out . But colours should be same. Sorry I must have made mistake when talking . But it’s the reverse ones I have highlighted not brake

[@christinethompson2269]

@@ishanperusinghe perfect thanks for the quick reply much appreciated

[@isaacwright8303]

Ok so I have the Upgraded screen that came from the factory, how would I make that work? I don’t have the st however, I have the se. And I bought a camera very similar to yours but it goes in the licensee plate light instead.

[@ishanperusinghe]

Sorry don’t understand the question . What is se and st?

[@ishanperusinghe]

Wiring for all these Chinese reverse cameras are the same . Just follow video wiring

[@ra7671]

Would this and the head unit you used in your other video work in my 2009 fiesta Mk7 titanium?

[@ishanperusinghe]

Yeah it’s good . The main feature for me is dsp and carplay really

[@hanifhaja6275]

Does the reverse sensor beeping working like the original head unit that came with the car?

[@ishanperusinghe]

Yes oem parking radar should work . But that’s to do with headunit . You commenting on reverse camera install

[@emanuelaydin8915]

How did you manage to connect the wiring from the head unit back to the camera? ✌️

[@ishanperusinghe]

It’s plug and play

[@mike7444]

I have same headunit mate. So I just need to connect the yellow video cable from camera to headunit and ignore the other wires?

[@ishanperusinghe]

You also needs to wire power to camera from brake light as in video

[@mike7444]

Thanks. I have done as you did. The image is being displayed automatically when in reverse but the image is broken into 3. Do you know if I need to change any settings? I have same headunit

[@ishanperusinghe]

@@mike7444 try change setting to pal / ntsc or ahd and see if it fixes. Sound like freq or camera and expected on headunit is different

[@toiletgaming2005]

good vid but you made it WAYYY harder than it needed to be.. firstly i would cut the RCA at about 15-20cm from the camera then push it through the tailgate grommet and crimp on some 5€ 2pin connectors from the nearest autoparts store, same connectors for the boot switch if you feel like it, then for the rest of the 5meter rca: pull the headliner down slightly then pull back the grommet holding the wires to the boot and from the inside start feeding the wires towards the back of the boot and let gravity do the work for you, then simply attach your 2pin connector and youre basically done, just tuck the wires behind the headliner and behind the right A-pillar trim to headunit cutting the wires shouldnt be an issues as i doubt theyre shielded in any way on cheap chinese cams + and you can remove rear piece without pulling all the wiring out again

[@youssefelbouchini]

i have the same headunit and i installed my camera exactly like in this video but i still dont have a signal. am i missing somethin here?

[@youssefelbouchini]

i used a multimeter to check all the connections and that i have power on the 12V line when i put my car in reverse and everything checks out. I REALLY DONT KNOW WHYT ITS NOT WORTKING :(

[@ishanperusinghe]

Depends on the units video input . There’s different types AHD Cvbs . You might want to check you android head unit setting to match the input video signal

[@youssefelbouchini]

@@ishanperusinghe i have a cvbs version ill check some settings thanks for the info!

[@TonyVegas95]

how much it’s long the cable?

[@ishanperusinghe]

Which cable you taking about ? Unit I purchased in description

[@ishanperusinghe]

You get 6 meters I think . Regardless it’s a bit Short so possibly need to extended like I did