How to Install a BACKUP CAMERA in Your Car ( Do It Yourself guide )

[@JunkyDIYguy]

Guys, check out my latest video kzbin.info/www/bejne/i3iYZauqapuokNE

[@toculucian9340]

my friend, i dont understand where comes the red wire, u talk so fast...u can tell me where exactly please?

[@toculucian9340]

i mean the red wire from the radio

[@eazy2hate]

I hope you've improved at doing these kind of jobs lmao I know this was 4 years ago but this was trash

[@Jez1963UK]

Oh man, I thank you soooooooooooooooo much! I've just bought a reverse camera for my car and you showed every step I needed to be clear about, especially passing those cables through the sills! Most other videos miss that bit out! You sir, are a master! Thank you once again!

[@saabchaser]

Best instructional video ever..... Actually I really can't say ever... Cause I haven't seen every video.. but Iam so glad I happened to see your video... thanks for the step by step instructions.. Thanks.. now I feel that even a beginner as my self can install a rear view camera instead of paying someone else... Thanks for sharing

[@JunkyDIYguy]

Thanks buddy

[@jamesbourque6702]

Junky DIY guy

[@Csqd1975]

The best well informed video I have seen . I used to teach auto electrical in TAFE so well done.

[@stevestokes4206]

I bought a video camera backup system with the mirror and the camera and the wiring for $3 at Goodwill

[@MariaSanchez-zq4rz]

I'm a girl and you make everything seem so easy, even if I have to see the video 10 times, I will try it, thank you.

[@cstacks05]

Still the best rear camera installation video. A+ 1000 times

[@skip741x3]

I love how some of these install vids make it seem a peice of cake... it depends on the car... I just added one to a ford focus 2003 wagon and it was a royal pain in the ass.. fishing wiring thru the rear door hatch, then thru the rubber accordian connector to the roof area was a no go... no way an rca connector is going thru that accordian passageway which already had thick wiring in it... had to snip off the rca from the video feed wire, pass it thru, then connect to backup light then rip up more body moldings to get that wire up ftont, then had to resolder to rca back on.... took me hrs and hrs... also recommend doing a dry run before committing to the install... hook everything up to test wiring and camera..make sure it triggeers on reverse and camera shows on screen... that way you dont committ to installing a defective camera or bad wiring and have to pull it all out again.... i;d probably just turn my head and look over my shoulder vs doing this nitemare again.

[@baileywhanau]

This is my all-time favorite rear cam install too ! Great tutorial with good editing and video quality. AAA++++ Thank you.

[@curtisr57]

The Backup Camera kit I bought did not come with instructions. It did have similar cables to those used in your video. So thanks to you it works. :)

[@margaritameer6989]

OMG! Thank you! Now I see how hard it is and I won't even try it!

[@mohammadrezarasooli1783]

Thanks to your efforts, a professional installation with no problems.

[@aakashbikramrana323]

This is a very useful video. Now I feel much more confident installing the new stereo and also wiring the backup camera to it. Thank you!

[@WGPmetallica]

Had to find 6 different videos on how to connect the power wires to the reverse lights. Thank you for clearly demonstrating this!

[@williams6140]

So that extra red wire that runs of the yellow VGA cord connects to the power of the reverse light? As mine won't turn on when I put it in reverse but comes up when I push rear camera on head unit..

[@Pellude]

@@williams6140 I am having the same trouble, so what ended up being the case?

[@Pellude]

@@williams6140 did you end up having to connect the red wire from the vga cable to the positive wire for the light bulb?

[@Snacktime-km4bm]

You made it look so easy , great job ! I’m tempted in installing a reverse camera into my Aurion aswell now ! Hope all goes well

[@seasonsstarsstudios]

Thanks for the video! I’m definitely purchasing a backup camera for my 1999 Ford Taurus now!

[@Oldboyocto45]

Optimistic narrator. Great vid

[@SHAMEELMON1]

Hi dear, many many videos I watched but no one explain like u thank you so much and God bless you.

[@sonicx059]

Dude, I know this video is old but so far it is my favorite out of all the reverse cam videos I have watched.

[@Tony-112]

It's the best

[@17shakil]

Awsum man.. Now I feel brave enough to do this.. I really appreciate u man. It takes lot of affort and hard work to make videos like this.. Keep this coming

[@skatiaris62]

Bro, everything you do is so professional and imformative. Keep it up, i really ejoyed the video.

[@IlianNachev]

Excellent video and explanation, but my stereo does not have a “back” wire for the red wire from the video cable to connect to… Where do I connect the red wire that comes from the video cable in this case?

[@greenyi2]

find a replacement video cable with trigger wires on both ends of it

[@affal1983]

Cool DIY video! Easy to follow, keep up the good work!

[@jonesappraiser1]

best DIY video i have seen in a long time. well done mate

[@BG-yq4rh]

Thank you for the detailed explanation, Well done! I have actually managed to install a camera to my Camry following your step-by-step video.

[@JunkyDIYguy]

you're a champion.. keep it up

[@BG-yq4rh]

I need your advice, any help would be appreciated! ... after installing the DVD player and the reverse camera, the steering wheel buttons are not working (the volume up and down buttons both cause the volume to go up). Do you have a way as to how to get them to work? I have a Camry Altise 2007. The brand of the DVD is EHOTCHPOTCH. Full details can be found in the AD on ebay www.ebay.com.au/itm/132294998061?ul_noapp=true Regards.

[@Pellude]

When you connect the positive and negative to the the light bulb wires, do you also connect the other red wire as well to the same positive wire of the light bulb?

[@greenyi2]

if your monitor/radio headunit has a trigger wire for reverse signal, you 'd better do this

[@alexanderbankowski5617]

bro this is not junky diy, this is very clean

[@Raj-nh3fc]

Pure bliss. Well photographed and explained.

[@walterdebarros]

excellent video from start to finish, great instructions and tips all the way down to theme song that I'm about to google for

[@oscaraguilar4218]

Excellent video. It does give me some ideas on how to do my car. thanks

[@muhammadamjad5762]

Fantastic really helpful for Bignors.

[@johng.6129]

great video, i just bought a cheap camera and this video will definitely be useful during the install.

[@ilkochulin7724]

Bravo!!! Excellent one. Nice and exact tutorial for the need. Will install similar camera and your video is the best one, shows precise the steps required for the installation. Greetings and big thanks from Bulgaria

[@thelavaflo]

Great job on explaining the installation process in your video. Very detailed. Thx

[@hutukaTB]

This video is the best one for backup camera installing with detailed instruction on wiring, very clear and super professional! Thank you so much!

[@2xtreem4you]

Great video. You gave me confidence to install mine.

[@mkhan59]

Excellent clean work and nice video, congratulations to you!!

[@stephensmith3834]

This video is so well done. Thank you

[@nobznezz]

Very good instructional video. One observation though, if you disconnected the negative battery terminal, how is it that the head unit was powered on right before you removed it? Just wonderin'.....

[@shahzadazzam]

Awesome, very well explained.

[@luisf.fernandez9911]

Thank you for the video, very well done. I think even I can tackle this project . keep it up.

[@rayonrose9818]

man you are the best I try it an work thanks man.

[@John仰望十架的栋栋]

dang, u r so much like pro mechanic, I may not have this much tools already

[@BJey-ui6ud]

wow... this video is what i need as diy project... really detail and reasonable instruction to follow... thanks may u will make such a good video like this in future... tq

[@johnly5702]

Has lots of good information, pros and cons. Good content 👌

[@richardmiels3402]

I've just enjoyed 2 of your postings; you are a funny guy and your content (headlights and reverse camera) is excellent. Good production values too. Great to see materials available in Australia rather than US/UK products. I'm hooked and have subscribed so more power to you!

[@mikedoldersum1506]

Thankyou so much men you made my day 🙏🙏🙏

[@ShadowZidan]

super informative, love your work

[@JunkyDIYguy]

Brown banana, love your channel's name man

[@niazmorshed8984]

if this is simple and easy, then these words gotta change their meaning asap.

[@JetKNINE]

When my mate and I installed a reverse camera in both our mazdas. His fuse popped and had to use a 15amp fuse for his to work. As for mine for some reason, I popped the fuse aswell, plus a 15 amp fuse we replaced it with. So my only option was a 25amp fuse which has proven to be the most reliable for my mazda. An now i have no issues, i dont if it's because mine is manual and his is auto. But the load on his car is different than what the load is on the system of mine

[@Rhandahl]

good video, However I recommend crimping for connecting wires in cars, it's the absolute no.1 solution in automotive applications

[@gteich04]

You mqke it look so easy!

[@CHixon]

Good explanation and complete. Other videos leave out critical steps dooming the installer to a botched job.

[@Gizmetti]

He connects to the reverse lights twice??? I'm so confused. Why can't you connect the trigger and power to the same light?

[@stoneyvanderhulst4257]

Thats what i am wondering two!!

[@joxosea]

Me three

[@djshaneod]

He did connect them to the same light. The first connection was to supply power to the camera when in reverse, and the second was to trigger the head unit to switch to what the camera is seeing. Could connect them at the same time but he did them seperately. Same same 👍🏻

[@poleongriffis4262]

Great tutorial 🤙

[@hanisameer774]

Thank You , it is very easy .

[@PaekSukis]

This is some good quality content. Thanks for making this video. Keep it up!

[@robertramkumar1325]

Great video for diy.

[@supot707]

precise, full in details ,the best video......

[@jessestrum]

thanks for sharing your knowledge

[@alex234l]

Pro level installation, video and editing. Super

[@jennifergarcia-mr6xx]

awesome video i can use for my daughters car. will you ever do one for a truck? I need help with my truck. thank you

[@Eire-]

Great video fair play man 👍🏻

[@justenhansen]

Fantastic video 👍

[@Zerpersande]

There are wire splice T-connectors that just snap on to the desired power wires.

[@petekane2501]

Great & helpful video . Well executed video with Step by step & photos Thanks

[@lloydboone7185]

Great instructional video ! Thank you 😊

[@DJ-qm2rh]

Very precise! Excellent video!

[@bradlybelle5676]

Great video. Just installed mine & it works great. Thanks.

[@saidbouaddi5532]

Thanks for the great job! Good luck, buddy.

[@popoymotmot]

Thank you! I will definitely go for the rear view mirror as it's the easiest to set up

[@wiskenstube]

Thanks sooooo much 🔥💥💥🔥🔥👍

[@themikeymikechannel2947]

You can also use any back up camera with night vision and with bnc or rca to a DVR system around your house and or view when away from home plus if you paint the shell of the camera and blend the color with the house they become unseen!!!! **A CHEAP HOME SURVEILLANCE SYSTEM IDEA** What great idea huh?????(💡)

[@natashamb24]

How do you know which is the live wire and the ground wire?

[@Ppp-kk6hw]

Cheers gringo. What's best budget cam out there. Any good brands

[@imperialthugg]

fantastic video and information.

[@tgahshaktsang6554]

thanks for video !!

[@jzastoria]

Great videos

[@motorspark2.0]

thanks bro.... great job

[@gachiBass]

1:23 i just can't get over this stock song I legit cannot separate this from the rats, like it's etched into my brain. fully jerma-poisoned.

[@papi1999]

The imposter is sus

[@freeukraine850]

Very good work! Thanks!

[@Mau365PP]

Can you do one for a bird view 360 camera system please? I can't find a diy guide for this, please 🙏

[@kevinkidneyy]

Wow!! This is a good video thanks man

[@mosajan9112]

How are you feeling to make

[@mohamedsh4093]

Dear thanks a lot for your video

[@HuntaKiller91]

the perfect explanation that i need..im gonna share this and do u mind recommending the best reversecam with nightvision?

[@yolandayolanda1032]

Thank you, very informative video! The best on KZbin :) although I am scared to play woth electrics myself :( i bought dash cam rear and feont for £28 off amazon but I assume I will pay more for installing rear camera 🤣

[@clarkkent2220]

Hey aren't you the same guy that does the fingerstyle guitar tutorials?

[@hassemsadiq]

Awesome vid Can u install camera axactly in the middle or can it be a little to the right or lefts thanks

[@wangjidan1718]

as what i can see on the road, most of them will be on the left side

[@jenniferfernandes9267]

might be a silly question but will messing with the reverse light cables at all affect the vehicles MOT?

[@diagnostikacartruck1398]

GREAT JOB and better is all list of your device which are take in video , best regards and i want more and more videos :)

[@abrhm1986]

Great video, I am about to do this on mi car, I have got a new android stereo.

[@jackw3235]

Great video 👍👍👍👏👏🤘

[@zonadelocos]

Do I really need to use solder? Or its opcional just w the tape is enough?? And thanks a lot for your vid I’ve been looking for it a lot of vid out there but no one is specific Thks again

[@ThaiNguyen-tb9zl]

Optional

[@DavidS-vi2xn]

How many hours of work did this take ? That is, (1) How many hours of research ? (2) How many hours of labor (find equipment & install it)?

[@akashmax9407]

thankxxx broo its most valuable video

[@Ridoshke]

Thanks. You are my hero :D

[@fig4snick]

So got a question... I have a head unit and installed a rear view camera... It works for 2-3 seconds when I get to reverse and after that lines appear in screen and then gets a black screen!!!!

[@tonyvice4244]

Is soldering really required ? What happens if I don’t?

[@ubiskenasduseikenas]

you connected camera power + and - to light. But what you had done to red wire from camera? you did not even connect it to + light ?

[@tonyvice4244]

Thank you!