Ford flywheel removal and replacement

[@jonetten589]

This is the best view of a damaged flywheel that I've seen yet. Thanks for posting.

[@Oaky]

LOL!

[@BartSparrow123]

It's a flexplate. A flywheel is only on a manual transmission. Flexplate connects an automatic transmission torque converter to the engine crankshaft.

[@user-ih4no2pv3w]

I like that u showed what volt" goes to what.. that HELP A LOT. THANKS

[@analenard9709]

Thank you so much for your explanation you were the only one to explain it with detail loved your vid.

[@28samz]

Did you ever make a video showing the entire process of getting to the flywheel from start to finish? I have not been able to find one online…

[@chadpringle7885]

P.S.A. Never work on a car that is supported by cinder blocks, use jack stands that have an appropriate weight rating for the vehicle you are working on.

[@crayzchicken2668]

Maybe that's all he got 🤷

[@unclexeres]

You haven't lived until you had an automobile fall on. Better safe than.....

[@yawachannan3.065]

Great video I'm literally getting this done right now.

[@deliciousness8183]

Bro, please invest 20 dollars and buy some jack stands. Cinder blocks crush. It's a real thing

[@MrAvlandrew]

looks like he put his jack stands on cinder blocks... dicey!

[@gottahavegoalsset]

Safety first. Don't do this anyone. You CAN be crushed when something slips or fails .

[@phoenixcomunicacionestijua9629]

Thank you very mucho for the idea. Great help.

[@ryanbareither89]

Are those cement jack stands?

[@evangonzales4848]

i have to take out the transmission ? for the flywheel? im screwed

[@k-love2262]

I'm glad to see somebody's always having some screwed up to say andnegative. I wish I could go buy some that I need at any given time I just shit money.

[@patriciatorres6706]

Hi I would like to ask you a question what happened when I can see my flywheel from the bottom of my pick up it runs good shift shift when they should but when I bought it I didn't see that the casing covering the flywheel had a whole would it be okay or do I need to change the whole thing if you can help me and answer that I would really appreciate it thank you

[@bobbyogalde7866]

what's the torque specs on a Ford F-150 to the crankshaft

[@randallcarney1216]

Always put a new rear main seal and a new seal in transmission when removed

[@joshuaculp9417]

Couldn’t see a thing. I was watching The Blair Witch Project.

[@daniaann]

Thank you. 😊

[@lorenzojuarez4971]

Great visit

[@themetaphysicalaxe5506]

What caused the flywheel damage?

[@SeansNewWorld]

Is the engine a 5.4ltr? And what year

[@dim2035]

Thanks so much! I know it is difficult but the vid is hard to watch because of all the movement of your phone. Great info tho!

[@AndreaR12810]

What is the year, make and model of this car

[@brandonray4178]

Good view

[@mikegross1810]

i have a 1995 chevy truck 350 5.7 2500 flywheel wish side to put to starter side

[@utuber4841]

Use split ring lock washers on the crank hub bolts. Then torque the bolts to spec problem solved.

[@sjr7822]

couple hundred dollars two days DIY compared to 1000 dollars and someone else doing this job

[@djautomotive8738]

how you remove the flex plate from torque converter?

[@houstonmccelland9426]

6 bolts spin the crank 14 mm

[@jimmylucero7144]

Where is the spacer

[@ravimanna9690]

Hi can u tel.me wat causes d squeaking noise in D fly wheel area it's realy annoying an I can't seem.2 find it plx any help wud b appreciated

[@pony69y]

Probably is little bend

[@thegenius653]

I had that issue and it was the starter try replacing the starter

[@TonyMontana-ss4hq]

"Pilot Bearing"

[@randallcarney1216]

Automatic transmission does not use a pilot bearing.

[@nickdiesel8018]

torque specs please

[@jomofo42]

You removed a flywheel from an automatic transmission? That might be amazing.

[@wyohorseman9948]

Automatics are easier than manual transmissions because no clutch fork to deal with

[@mattadams1370]

If the camera was not like a fish in the water flopping. Get u a magnet and stick your camera in good place. 😆

[@deadmoney0166]

This is what mine looks like

[@BartSparrow123]

This has to be a Ford problem. Replacing the flexplate on a 2006 F150 right now. Why did Ford make the flexplate gear out of mild steel? Much easier to replace a starter drive gear than a flexplate!

[@MiguelGuzman-to2st]

Back video

[@josecastellanos4538]

Flywheel and flexplate is NOT THE SAME THING.....

[@sknerl]

Jose Castellanos True, but many of us get used to naming them the same. I googled the wrong name myself and it worked out was like...oh yeah, it’s called a flex plate. Good deal, he’s doing the same job regardless.

[@Jeremya74]

So is he showing us the flex plate or the fly wheel???

[@michaelsept]

I was told this would be really hard….. looks pretty easy

[@Dixieflinter]

That’s a flex plate

[@nick7.398]

So u need to remove the trans 😐 no way

[@allaroundvlogs12322]

Makalibat ang video yawa

[@mikepapillo5728]

hay kid ,, wheres the replacement

[@oblivian1308]

Flexplate*

[@jlamp3447]

No one even knows wtf your working on

[@nkel6111]

amateur ...pure rookie.