Focus Mk2 Secret Menu!

[@nseni679]

Some numbers that you see are written in the hexadecimal (Hex) number system. At 3:26 you see fuel percent 002B, which is equivalent to decimal number 43. So your fuel tank is 43% full.

[@GentilsGarage]

Makes total sense, thank you very much for the clarification

[@nseni679]

At 3:30 Engine temp. might be the coolant temperature. The gauge can show numbers only between the range 60 to 120, but the car computer reads the temperature of 30C from the sensor.

[@GentilsGarage]

Ok, I see now

[@macbook9084]

Great thank you for sharing found it really useful 👍

[@GentilsGarage]

Thank you

[@pdtech4524]

All very useful info. Cheers.

[@GentilsGarage]

Glad it was helpful!

[@nickvandepeppel8466]

I got error code D900, what does this one mean because it’s not on your list. And also my navigation system is suddenly not working anymore, it is stuck on the loading screen with the ford logo. Is this maybe why I got that code. Do you know how I can fix it?

[@GentilsGarage]

Sorry, can't help with that ás the list of codes I had was limited. Have you removed the unit and disconnected it? Might need a few minutes to be unplugged from power to reset

[@kevowski]

Interesting 👍🏻

[@GentilsGarage]

thank you

[@ciaranlefebvre0579]

Does it go back to the normal menu every time u turn car off ? If not how do u go back to normal engine , thanks

[@GentilsGarage]

Yes, it goes off after switch off

[@YarmouthMark]

Got any experience activating cruise control?

[@GentilsGarage]

I’m afraid not. All I know is that you need Forscan to activate it after you install all the other bits.

[@johnfitzpatrick9994]

Thanks Gentil that's great 👍

[@GentilsGarage]

Cheers

[@ZoranMisic-g8u]

Hi, I have 2009 mk2 Focus with display like on the video. I can't find steering mode setup - standard/sport/comfort. Is that extra option ?

[@GentilsGarage]

Strange. It's not an extra option as it's something built in on all cars with this display

[@atouse]

Hello, I also have a focus and it is titanium, my friend has a titanium x and he have electronic steering. In titanium and below, sensitivity adjustment cannot be made due to power steering.

[@aleksandarilijevski2651]

@@ZoranMisic-g8u you can access this when your engine is turned on, but not moving - you take the “rotating” controls on the left hand side of the wheel (the ones where you want to see the fuel consumption, temperature etc.), but when it’s idle you’ll have the “your settings” menu item showing up (unlike when you’re driving) - here you press the button to enter, and the first menu item will most likely be the steering mode). Found this on my ford focus mk2 flexifuel from 2007 :)

[@brianfearn4246]

This could be due to yours having a belt drive hydrolic power steering pump . Some models have electronic power steering 😊

[@Wenutz]

Where is the list of error codes? Cannot find it in the description box.

[@GentilsGarage]

sorry, i was under the impression I had uploaded it. its a list of menu functions, with only a handful error codes.

[@RoBika096]

It doesn’t enter into test mode for me. I did everything like you. Can you tell me why?

[@GentilsGarage]

Sorry, no idea. It always worked for me

[@sonoftokwa]

I have just started restoring my mk2 and know so little about it. Apart from the under chassis, I am deeply trouble by how fuel thirsty it is. Any advise you lot can give me to improve it? Thanks

[@GentilsGarage]

what engine you got and is it manual or Auto?

[@sandorszekely6612]

Szia,ez működik 2005 mk2 1,6 tdci nél is.Mert nekem más az óracsoportom,azaz régebbi.Köszi a választ.

[@GentilsGarage]

Sorry, I don't know if it works on those

[@raftonpounder6696]

Thank you!

[@GentilsGarage]

Yore welcome

[@Nyiomi-c1g]

I hear like a sensor noise while I'm driving, Why is that? The same noise at the end of the video

[@GentilsGarage]

Sorry, no idea what it could be

[@roryks]

I get the same thing. Not continuously, but if I go over a particularly bumpy road the sensor will chime and the "i" light will flash. I wonder whether it's a faulty connection, but trying to explain the problem to my mechanic is proving to be a losing battle.

[@brianfearn4246]

Try turning off the chime using the menu setting button on the indicator arm 😊

[@mgtechblender]

How to check the highest speed of your last ride, not the max speed of a car but of your ride from the last idk, few hours

[@GentilsGarage]

I think you need a separate software plugged to the OBD port for that

[@nareshsonithaleshwar3197]

How to access hidden secret menu if the car is keyless and not manual

[@GentilsGarage]

I think you just press the start button once while you press the OBC button

[@nareshsonithaleshwar3197]

@ Thanks, will try tomorrow without starting the car (I mean without pressing the brake), see if I get access to it

[@fordgarajankara]

❤👍👍👍

[@GentilsGarage]

Thanks

[@J-PoN]

👌

[@GentilsGarage]

Thanks

[@JAMESBOND250100]

Can you not understanding . So easy that you this please dutch subs. Then i can read.

[@GentilsGarage]

you have to select the CC button on the video itself and it will translate to your app language. sorry, but i cannot add subtitles automatically a sthe video is set to english, so the KZbin will automatically translate to Dutch by selecting the CC on top