Ford Focus Third Gen - Front Bumper Removal How To Guide Mk3 (2011 - present)

[@edilbertoduarte9221]

Man the patience you have doing the job and recording at the same time thank you

[@christophercrawford3636]

Thanks for taking the time to record all steps both to remove and replace the bumper. Really made the job so much easier.

[@jakemir]

Thanks for taking the time for this job! I really don't understand the 4 thumbs down, this was a lot of work, and a great, detailed video. I was trying to replace the oil filter and was surprised at the number of bolts to remove to get to the filter. I left the parts off after the last oil change so I guess i will have to see if I loose fuel economy. Thank you again.

[@brettverbick6196]

Thanks brother, this video was a great help for fixing a collision with a snow mound that busted a bracket and pushed the bumper out of its seating. Its definitely a lot easier by the looks of it when there aren't icicles and snow all over the undercarriage.

[@happywrenching]

+Brett Verbick Glad the video helped :)

[@kleighstudios]

Yes! Thank you!. My bumper was hit by a semi tread on the interstate and you just saved me a lot of money. I can totally do this myself now, like I usually do on cars I've owned.

[@joew9392]

Mine is damaged a lot more than that, needs bumper cover, at least one fender, the hood, windshield and the steering wheel. Not sure if mine is worth repairing...

[@joew9392]

I forgot to mention a few other parts it needs, like a headlight assy and all the brackets plus the inner fender stuff...

[@Ry96ugy]

How long did this take you? Im doing this on tuesday and I need to plan a little bit?

[@EAADetailing]

If i wanted to replace the plastic front bumper pieces with a honeycomb grille does the bumper have to come off, or can i get at the pieces from under the car?

[@michaelcosentino8271]

Great video! is it possiblec to get a picture of the screws that were circled in yellow? the guy who "FIXED" my bumper did not put them back, instead he decided to use lumber screws and made his own holes.

[@robertdavis6708]

Great Video. I'll be installing a tow bar plate tomorrow and this vid is all I need. Once again son, thanks.

[@Super-650]

Excellent ! Exactly what I needed to know, especially the bumper bracket. Thank you. o/

[@okaythen001]

Is it the same method for 2014 Focus ST? Going to attemp to change the intercooler. thanks for the video

[@tonyfresh1]

Can anyone tell me what the plastic box behind the APF is called? Mine is cracked and want to replace it but not sure what its called.

[@genegilbert3605]

i am trying to add a lightbar behind the grill and thinking about cutting the middle plastic tubing in front of the radiator, wondering if i do decide to cut, what would be the negative impact if doing so?

[@drewstergion3649]

Gene Gilbert wanting to do the same. did you ever get around to it?

[@expirAnce]

What is the name of the part that is on the top of the bumper. The first thing that you start to remove after the headlights?

[@yungjavfromaz]

Does the top plastic panel thats connected to the top of the bumper come off?

[@LORDRA1DEN]

One of the things that pisses me off about my Focus, that my 09 Rav4 Limited doesn't do is how much b.s. you have to do. I need to change the horn on my Focus. Apparently Ford felt this much effort made more sense than mounting it on top. How long does all this take start to finish including putting it back, an hour?

[@MihaiMangu8]

Where are the crash sensors? Should we worry about those?

[@enjoyyourself4120]

What are the names of the plastic that goes on the lower radiator support

[@jamileepiatt9760]

do you have a video on replacing the radiator that vehicle, thank you

[@SasukeUchiha-ef9jl]

Whats the part name that the bumper support clicks into?!?!?!!? im continuously looking everywhere but i cant find it :(

[@bryantmontano2975]

Hi do you know where the front impact sensors are located?

[@shahidbaig43]

hi my ford galaxy 2011 diesel showed an engine management light. later with diagnostic the message was... "Lost communication with active grille air shutter module A". what i need to replace? temperature sensor! regards

[@chris_520x4]

I’m at the junkyard watching this, thanks!

[@thecurtisreport]

any idea on the easiest way to get to the horn. I think I need to check the wiring or replace.

[@Sh4neT]

No bumper removal necessary. Use a pry tool to pop off the passenger side black triangle grille on the bumper. Horn assembly is right under there and just held in by a connector and a single bolt.

[@joshuaphillips4740]

can u get to the horn by taking out the headlight or would it be best to go underneath

[@jaredshelton4718]

The only way to get to the horn is by taking off the bumper completely

[@Tylnorton]

Jared Shelton. Well shit.

[@Sh4neT]

@@Tylnorton no bumper removal necessary. Use a plastic pry tool to pop off the passenger side black grille triangle from the bumper. Horn is right there.

[@Dignitas1234]

why is your coolant level below minimum?

[@idontthinkso9029]

The front ends up on ramps, so think about it

[@matthewtallman656]

How to i remove the grill with the two chrome slots. I want to black them out.

[@THR33SIXX3MPYR]

Hey, you can buy window tint film to cover the chrome strips. Just apply the film and then trim it to fit.

[@karlbrgemller595]

Vis hvordan udskifter xenon pære

[@cvirga1]

Is this the same for the focus ST?

[@martinlopezrod2946]

Do i really need to have that thing that covers the engiene from below... because mine broke and i took it off.. but my dad says that i need it.. can i buy one somewhere?

[@happywrenching]

Not going to hurt anything if you run without it. It is there to reduce noise, increase gas mileage a little bit, and offer protection from water and small debris. To get it replaced you will have to go to through the Ford dealer.

[@eearley1984]

do you have a video on how to change a horn on a 2012 focus

[@jaredshelton4718]

If your horn stopped working, it's probably a loose connection but you have to take off the entire front bumper to even get to it.

[@John.redcorn420]

what about to replace the radiator fan do i need to remove the whole front bumper ?

[@princeduties2991]

Jesuz Bernal no

[@Fordfocusstmk3250]

Was going to buy an intercooler for my ST... This looks like a right headache NGL 😢

[@revampted]

I got a busted assembly foglight do I really need to take off the bumper?

[@happywrenching]

No need to take off the bumper. Take off the two under-body covers and you will have access to the fog light.

[@wemasc]

revampted i need put cable foglight in bumper. i do not take off bumper ?

[@eriks1475]

Thank you from Germany

[@danielfata56]

The best

[@pvp9044]

Thank you! It was very useful.

[@vinland98trance]

very helpful video, thanks man

[@nopnoi8797]

Thank you it very good.

[@michellecleland5685]

Very nice video, thank you.

[@d1szturbe3d]

Great tutorials! Subbed!

[@sk8trnate24]

Thank you so much lol

[@cbgames7317]

Great video!!!

[@princeduties2991]

Nice work!

[@berdnikovandrey1]

Спасибо дружище!!! очень помог!!!

[@TorkiNoor]

very help , thanks you + big subscribe

[@chrisnovy3448]

Good video.

[@skyscraper37]

Awesome!

[@genacrocodile1532]

А русских комментаторов нет что ли?

[@ابومحمد-س7ج4ذ]

سيارة فورد غير جيدة دائمة الحماوة

[@edilbertoduarte9221]

You're a brofessional

[@BaggedFRC]

Somebody buy this guy a 3/8 drill with a torx bit, lol.

[@jp7489]

Lots of plastic👍

[@colezink3443]

first

[@oscarescobar4904]

Hey is it the same for the 2015 focus?

[@jaredshelton4718]

should be, it's the same platform

[@sk8trnate24]

Thank you so much lol