Ford key programming PART 2 - FORScan

FORScan with the OBDLink EX cable, progrmming a new transponder key to a Ford Transit Connect van firstly checking the orginal key on the keydiy KD-X2 then using the key programmer in FORScan to make a replacement. Will the key programming work THIS TIME?
4d63 transponder chip programming
Subscribe and get more great videos weekly
/ @rmautodiag
OBDLink EX cable
amzn.to/3adoPlE
forscan.org/home.html
Picoscope 2 channel scope
amzn.to/2C8MeYt
Picoscope 4 channel scope
amzn.to/3gvFWRB
Uni-T multimeter
amzn.to/3bSDT7J
rmautodiag.com
home
/ rmautodiag
Disclaimer:
Due to factors beyond the control of RMAutodiag, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. RMAutodiag assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. RMAutodiag recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RMAutodiag, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
As an Amazon associate, i earn from qualifying purchaces.

[@jacenjason3880]

Thanks for the video, I had the same issue with transponder, but luckily I had bought two other ford keys for a different ford, keys didn’t program first time, changed the transponders then no problem. Car starts no issues with both keys. Thank you.

[@madgin1]

Great video. Good to see you can use the 4d63 from an old used key👍

[@rmautodiag]

Thanks for the comment

[@claremadgin]

👍 love your new apprentice! 🥰

[@rmautodiag]

Thanks for the comment

[@danielivaneza8358]

Game changer!

[@keymad4]

The first chip was blank, you had to generate a code and load it onto the chip, second one worked because chip was already coded.

[@ahmdsiml]

thank you for sharing

[@ianh5300]

Great video, thanks for the explanation. Do you need to already have a working key to do this procedure? Lost key and no spare, will have a new key cut to operate the ignition barrel and connect forscan but will it still program or does it need to see a working key first? Many thanks

[@MrD2cracker]

Hi bud great video, I've managed to program a new key but would love to delete the lost key. Do you have a video of doing this? Keep up the good work

[@To-Masz]

I have 2 cards for mazda cx 9 from 2008. I have a problem with keyless go. Once it works fine and in a moment I have to start the car with a metal key. The key flashes red while driving. Not when the immo is flashing and I can't start the car. I suspect that it is the keyless module or the fault of one of the antennas. Can I use a forscan to reprogram my cards? Is it safe?

[@iraklisichinava6514]

Hello, I have only one key. I tried to program and I can no longer drive the car. Is there a way to program a single key?

[@keyauto83]

Bonjour juste une petite question je voulais ajouter une nouvelle clé sur une Ford Mondeo 2002 j'ai utilisé une puce 4d60 40bit le programmateur indique bien clé programmées et rajouter mais la voiture ne démarre pas d'après vous d'où viendrait le problème merci

[@adamsmith4292]

Great video, well explained. Do you know if this procedure will work if you only have a spare key (non fob). I have a original Ford fob key second hand to be coded to the car.

[@rmautodiag]

Yes should work. Thanks for the comment

[@southernvapersden1304]

Will this work for a keyless entry as well?

[@gtempo4673]

hey mate do you know if this will work for a ford expedition 2004?

[@wilts43]

Hi I have a 2002 Mondeo & Forscan. And I need a spare key. I don't have that key-chip-identifier gadget............. is it essential? Thanks

[@gregorypiercesr.2769]

Will this programmer work on a 2010 ford Ranger in the USA?

[@kurtchambers5767]

Great Video! Thank you! Just have a question. Does the new key you progammed work as an original oem key or is it just a clone?

[@rmautodiag]

Works as a new key not a clone

[@xnetcascais]

hello. i have a question. im trying to do the same following this video but when clicking start in PATS (Run Service Procedure) I get error message "PATS programming has been started" + "Service procedure as been interrupted" - but i did nothing. the system does not go through and this is loop every time i press "Run Service procedure" button. Any tips? tks (just a highlight that in "Service Procedures" menu I only got 3 options "Module PCM - PATS Programming" ; "Module PCM - Change Fuel Injectors Factors" ; "Module PCM - Read Fuel Injectors Factors" )

[@marcosreis5969]

Hello, I have the same problem here with a transit 2016, how did you go through?

[@EagleKeeper86]

Are the 4D63 80 bit transponders backwards compatible to the 4D63 40 bit transponders?

[@rmautodiag]

I believe they are supposed to be backward compatible

[@Richard-bw2nb]

Hi was your 4d63 chip that worked 40bit or 80bit?

[@rmautodiag]

It was a 40 bit chip

[@Richard-bw2nb]

@@rmautodiag thanks!!

[@mariaalesanndra]

How may Pats key can you program? Thanks

[@rmautodiag]

Up to 8 if I remember correctly

[@mariaalesanndra]

@@rmautodiag Thank you.

[@barkatakiutpal]

Can forscan do second hand ecu swap of ford ecosport

[@ApolloVIIIYouAreGoForTLI]

I've read some have been able to do ECU/PCM swaps... Search the forum

[@labradormcgraw]

Not bad. But I think your apprentice could've made lighter work of it - I'm sure I saw her shaking her head at one point when she was watching you. 😁😃