Ford Mustang Repaint Part 4 , clearcoat Application Using the IWATA W400

In this video i will be taking you through the clearcoat Application Stage on this Ford Mustang Repaint using the IWATA W400
#Passion4Paint merchandise now available head to our site at
teespring.com/...
If you have any questions feel free to ask away and as in any video i will do my best to answer you all.
I hope you guys enjoy and dont forget to like and subscribe
/ tonys_refinishing
or like our facebook page
/ tonysrefinishing
/ tonys_refinish
Support our channel in making bigger better content / tonysrefinish

[@pintandocochesalberto]

Buen Trabajo!!! Ha quedado muy fino, yo ahora uso la Sagola 4500 Xtrem que tampoco va mal pero la IWATA será mi próxima pistola de pintura

[@jaymes1383]

The FLG4 Gun came with the 1.4 and the Dekups starter kit and the extra1.5 tip so just kept with them and they work well.

[@madihatahir]

nice to see you back in action on you tube tony , taz .

[@TonysRefinishingTV]

+madihatahir thanks man just trying to figure out an upload schedule around the work and then things will be back to normal again

[@Velvethamma]

I would agree that the PPS liners do slow a gun down a bit... It almost makes you want to turn the fluid out or go to the next larger fluid tip. At least I find it to be that way on my Iwata LPH 400

[@TonysRefinishingTV]

+Velvethamma yeah i found it slowed me down alot more than i like they work perfect but i dont like to change so much of my style of painting just for the cup change just dont think they suit what i wan tbh

[@dongil123]

+Tonys_Refinishing Hi tony great work and explanation, I gave up with the pps system a year ago, Just far to expensive for the benefits they give, once you add £70 10 to 20 times a year it just seems unrealistic for the sake of extra time in clean up and keeping filters clean ect Anyway rant over lol great work Tony keep the vids coming all the best Mike.

[@bespartyjny]

Nice, Mate

[@tonygoulart3693]

Very nice work! if you were in CALIFORNIA I would be using you to paint my Cars. we are doing full restorations on two cars at this time. Our painter is very good, but i like your openess. keep sending those vids thanks

[@TonysRefinishingTV]

Thanks Tony, what cars are you restoring, and there will be plenty more to come

[@tonygoulart3693]

+Tonys_Refinishing 1974 chevrolet caprice 4 door hardtop and a 1965 Ramber American Convertible. both in body and paint now. original colors.

[@TonysRefinishingTV]

very nice cars buddy

[@SaqibKhaliq]

Great vid, enjoyable to watch. Pps seems to leave a lot of waste which is a shame. If you had two collars, you could pop one off and bolt the nect one on. Love my GTI pro. So looking forward to seeing a review on the Pro Lite.. when you find some time between jobs. Thanks!

[@TonysRefinishingTV]

+Saqib Khaliq already started filming with the prolite so it wont be long before i get that up lol

[@jaymes1383]

Good job on the pony 'stang.

[@TonysRefinishingTV]

+Jaymes thanks fella

[@jaymes1383]

Sweet! use dekups system when doing BC/CC but use other guns for single stage or enamel paints .Every gun has its use & purpose.

[@TonysRefinishingTV]

+Jaymes yeah i may look into the dekups

[@abdulghafoor1106]

Hi tony new subscriber just saw the rs turbo video by Luck just been through most of your respray videos LOVE the way you work i would like you respray my Mercedes 500 sec 1989 Been putting it off for nearly 5 years looking for the right person with passion

[@TonysRefinishingTV]

Thankyou and welcome to the channel my email is [e-mail]

[@v8man350]

hi tony super job on the mustang, did you get to post part 5 yet as I cant find it

[@TonysRefinishingTV]

+v8man350 unfortunately we had to finish on part 4 as I was unable to get the last footage needed I'm afraid

[@v8man350]

ok mate thanks.

[@David-ty1xz]

When you spray clear on one side of the top of the car, and then finally make it to the other side, is there a point that if you wait too long you can get a dry edge?

[@TonysRefinishingTV]

+David S hi David yes your right you could and on the first coat it's not an issue but if you've seen the mini video I've got up then if I got a dry edge anywhere I'd just use some fade out thinner as soon as I'm doing spraying to remove and dry edges as in repaints sometimes it's hard to keep the wet flow easily so fade out thinner makes for an easier option to blend those out and. Only takes a minute

[@David-ty1xz]

Yes I saw that, very nice tip. This fade out method will work on clear just as well as a single stage paint? Thanks so much for replying.

[@TonysRefinishingTV]

+David S yea David and 2k paint this will work with so your direct gloss colours and clear also with no issues just always best to use high pressure and a small amount of fluid and dust it on otherwise things can soon go south lol

[@toshtwentythree195]

a part five if ya want it ???? are you mad ??? If ya dont do a part 5 i will cry...are you going to do a review on the pro ?.. When you work all them hours we will understand if the videos slow down,,,one more thing mate....GET SOME SLEEP...take care mate

[@TonysRefinishingTV]

+Tosh twentythree (tosh 23) haha il get some sleep mate dont worry about that , and il edit that part 5 up then too lol, ive just filmed the pro being used today tbh and il grab a review video on it soon with a dark motor so you can see it better cant fault the gun tbh

[@toshtwentythree195]

excellent...did you get it for a good price ?

[@TonysRefinishingTV]

+Tosh twentythree (tosh 23) i bought the prolite from spraygunsdirect mate with an order for a project im starting soon , i get all my guns from them as ive found the service and price the best around but i dont get an added discount or anything lol i buy all my guns full price and for the money i cant fault this prolite dam good gun

[@seasonedtoker]

Ever wondered what 3M means? Everything costs 3 millions...

[@TonysRefinishingTV]

To true lol