In this video I show you how to remove a stuck on blower motor fan with tricks I have learned that work throughout the years. Check me out on Facebook- / 651813524932940
Пікірлер: 95
@JenTemcio6 жыл бұрын
We were really stuck today trying to get the fan off of the motor and yours is the only video we found that gave us the information we needed to remove it. We appreciate you SO MUCH!!! Thank you for the tips and for saving us $50 on a new one!
@superhemorrhoid38335 жыл бұрын
I'm 41 years old I've been working on ford my whole life and I can't tell you how many of these blower motor fans I have busted. Tried your tip work like a charm I'll never do it any other way thanks for the advice man much appreciated.
@DukeBiggsley Жыл бұрын
My blower motor just went out in my 1996 5.0 Explorer and I will be replacing it soon. Thank you for this video. This information will be of tremendous help.
@martincolvill5453 Жыл бұрын
You're a lifesaver! 90°+ and I'm having to put a new blower motor on in 98 CVPI. Was so frustrating. How did us driveway mechanics ever do this without KZbin in the 70s?
@RodCalidge9 ай бұрын
The hard way. Lol
@chadwoodhouse82548 жыл бұрын
thanks man! so much appreciation for guys like you that take the time to post helpful videos like this!
@shaunnymac3527 жыл бұрын
Thanks bud. I've been looking for a perfect video just like this one for days!
@wesleybaker68943 жыл бұрын
Thank You So Much; After Suffering Thru So Many Tubes That Just Showed Changing The Entire Assembly, This Video Was The Ticket 👍
@notnilc644 жыл бұрын
This video was very helpful! My replacement motor didn't come with a new retainer clip so I was able to use vice grip pliers to pull straight up on the clip to pull it off intact and able to be reused
@NativePrincess864 жыл бұрын
Thank you so much, I looked everywhere for what I needed to replace and came across this! Good help! 😁
@billtheunjust4 жыл бұрын
Thanks, exactly the info I needed. Short and to the point!
@Hotrod_haji8 ай бұрын
Great video! Was struggling on how to remove the motor blower fan on my excursion! You rock!
@MelSoCal20116 жыл бұрын
I needed this!! Thank YOU!!
@SergSpace6 жыл бұрын
Thanks a lot, man! I used just 2 screw drivers, was patient and it worked!
@sigimatte35765 жыл бұрын
Thank you for getting me on the right track. For a minute I thought I'd have to buy another cage because it was stuck on so tight. I held the unit by the cage and tapped the shaft lightly with a hammer until the shaft was flush with the top of the cage then used your method the rest of the way.
@omarpadilla7674 Жыл бұрын
Definitely helpful, once I saw how this worked and what was important I sprayed a bit of lubricant and I took a flathead and banged on the motor rod itself while my gf supported the fan and it popped right off. I attempted the pry method but I knew I would probably break it. Thank you!
@f1hotrod527 Жыл бұрын
Thanks. I don’t think I would have got this off without this video. If there is corrosion on the motor shaft, clean it off before attempting to pull the fan off. You have to be patient just as the creator says. Also the flat style pry bars work better.
@samcarter48753 жыл бұрын
Just cracked the fan of my replacement motor for my 2008 Expedition this video saved the day as far as reusing the old one greatly appreciated
@lonestarfriend8 жыл бұрын
Thank you very much. This was helpful.
@JeffInDFW9 жыл бұрын
Nice trick, thanks for posting it!
@joehemphill11949 жыл бұрын
thanks for the video man.. just saved me 20 bucks.. cheers
@crimsonsabers66983 ай бұрын
Hey thank you so much. I used your method and it totally works.
@italiatdkb2 жыл бұрын
You saved the day. Thank you for your video.
@eugeneirby2284 жыл бұрын
Thanks bro a life saver!!!!
@baldbull43972 ай бұрын
Worked like a charm thank you
@mdcecichannel43662 жыл бұрын
Thanks....worked like a charm!
@griffparker14665 жыл бұрын
Thanks! Helped me not break the fan blade on my 76 ford elite!
@kermitefrog64 Жыл бұрын
Great idea. How old of a Ford truck is this off? I have a 1964 Ford f250 and I need to check to see if the motor has gone out since it will not come on with the switch in the cab.
@izzatrusli70523 жыл бұрын
Thanks Bro! Very helpful 👍
@saulolvera903510 жыл бұрын
Very handy tips. Thanks for taking time and posting. Love to see more on ford windstar.
@FordTechMakuloco10 жыл бұрын
I will make more as they come in for sure.
@patriciabunnell58265 жыл бұрын
This trick worked perfectly. My hubby had it off in just a few minutes. He was totally lost before coming across this video.
@rosemaryescobar81736 жыл бұрын
Dude that was so helpful going threw this now
@cjheiseriv3 жыл бұрын
Thanks buddy, helped a lot.
@michaelminnick783211 ай бұрын
Always a help👍
@joneayers Жыл бұрын
Great video
@juliobolivar9085Ай бұрын
You are the best, thanks
@markk36525 жыл бұрын
A thin coating of silicone grease on new shaft makes it easier to come off in future blower motor replacement, either for you- or the next owner.
@dylanvedia67053 жыл бұрын
Worked for 05 yukon denali. Thank you sir
@diev97096 жыл бұрын
You are awesomeness . Thanks guy
@sadiaAbbaas2 жыл бұрын
Thank you so much, it works for me 👍
@matthewbarnes49405 жыл бұрын
Exactly what I was looking for
@daddyfuntv Жыл бұрын
Great tip for the screw drivers or crow bar. Needed this.
@joepublic4069 Жыл бұрын
You are the man
@juliobolivar9085Ай бұрын
saludos desde Venezuela, gracias a tus videos he podido reparar muchas cosas de mi pick up, f150 2006 5.4 3v
@GS-kh5seАй бұрын
Great tip thankyou
@southwest45523 жыл бұрын
Thanks this was helpful as I am tryna get it off rite now n put it on my new blower motor
@ryankane71774 жыл бұрын
New blower motor comes with a new clip and gasket? Where? Is there a secret compartment in the box?
@HylianOverlord2 жыл бұрын
Didja buy the Motorcraft one?
@ryankane71772 жыл бұрын
@@HylianOverlord probably, because it's the spiritual successor to FoMoCo
@HylianOverlord2 жыл бұрын
@@ryankane7177 what are you on about?
@ryankane71772 жыл бұрын
@@HylianOverlord I generally buy the Ford stuff when I can. It used to be called FoMoCo, now it's called Motorcraft.
@HylianOverlord2 жыл бұрын
@@ryankane7177 I knew that I was referring to the way you went on a none sequitur.
@rambo007110 жыл бұрын
thanks for video man
@patriot4usall3 жыл бұрын
Can you please do one on how to access blower motor on 2015 ford Transit connect
@ericbradley98238 жыл бұрын
Do you have a video on how to replace a Blower motor for 2007 Expedition with Automatic controls? Everything say pull 3 bolts....but that's not the case on mine.
@franzbodmer3301 Жыл бұрын
Thank you, thank you, thank you !!!!!
@hieuhn999 жыл бұрын
Thanks I was afraid to pry on mine cuz it looked so fragile and that thing was really stuck on there.
@brianblithe22719 ай бұрын
Most peeps are just getting aft. market ching ones with fans so they dont have to do this but i dont buy any of that crap ( autozone parts mostly dont even work out the box) if i can get oem. My quest, is though are you saying the fan is obselete ??? because when they get old they explode in the housing, but i def, want oem motor and ill buy, if have to an aft. market later just for the cheap ass fan. thanks ford tech, and if you can answer quest,........ are fans themselves (mine 2003 f250 5.4) obselete ???
@hollystlocal22422 жыл бұрын
Bruh I had trouble getting the fans off my blower motor for my accord. Used two long flatheads and held it with my legs lmao. Thank you bro.
@billbadsha6695 жыл бұрын
Thanks pal... I was bashing the shit out of it... You saved my Bacon...
@bucklenutz48064 ай бұрын
Thank you
@martinvaldepena485 жыл бұрын
I have a question I have 2004 ford f150 the blower motor stopped working an my ac compressor. I took out the blower motor an tested it with a battery it worked fine I also checked the connection to it with key on the plug has no 12 volt power to it is there a relay that controls blower an ac compressor or a fuse. thanks for your help nice videos.
@rahrah80765 жыл бұрын
Martin Valdepena hvac Fuse
@benjaminvazquez697 Жыл бұрын
Thankyou!
@georgenettlesjr14662 жыл бұрын
How do you take it out of a 61 Thunderbird?
@johncork33829 жыл бұрын
worked thanks ~
@FordTechMakuloco9 жыл бұрын
John Cork I figured it would help someone.
@dfjdfk5 жыл бұрын
Thanks!
@actiaslunatn77292 жыл бұрын
I was confused regarding the clip. So I ended up using a pair of pliers to bow it into a concave shape to get it off, and then used a 5/16 socket to knock it back onto the new one. This was on a 1994 Cougar.
@stephen051319885 жыл бұрын
Thanks! It worked. Got the sucker off.
@TheWagonDudeАй бұрын
You saved me hours of profanity.
@zzrock1310 жыл бұрын
Thank you!
@FordTechMakuloco10 жыл бұрын
No problem!
@golemcoreable8 жыл бұрын
wooow 😁. it works like a charm with patients. i was clueless like a cave man. but i did it like tony stark(IRON man) way lol. with my thighs holding it and use a long screwdriver one side and turn and lift a lil and repeat 🔂.
@32fordcoupegirl855 жыл бұрын
omg, 98 navigator, black box?gear box? under glove box, needs moved out of way to get blower motor out, how do we do this?
@brentmaveric49815 жыл бұрын
I just got a bolt and tapped the motor shaft till it was flush. then a smaller bolt that fit inside the cage. came right off....from a 1990 Aerostar van. use a spray lubricant as well before u begin .
@spo7k8 ай бұрын
Saved my ass also tap the top part with a piece of wood
@tomsteffs65114 жыл бұрын
Thank you, i need to replace my blower motor in my Dodge neon, and no one sells them with that cage and except you no one shows how to remove that wheel/cage.
@spartus77632 жыл бұрын
For those who are removing this " wheel " as he describes , I did and I did another thing ... I took a hair dryer and blew it on the face of the plastic wheel ... blew on it with dryer for around 1.5 minute ... right ? It came right off applying pressure on it as video states to do . I guess heat helps
@impleasen Жыл бұрын
He forgot to mention the most important tool. The vise clamping down and holding it while you do that
@Jefford71710 жыл бұрын
My 07 fusion does not have a cabin air filter, is it a good idea to open the blower motor housing to clean it? Do i have to pull out the dash to do that? Thanks
@FordTechMakuloco10 жыл бұрын
Not really needed unless you park under trees or drive a dusty gravel road often. You do not have to pull the dash.
@MrDonny274 жыл бұрын
Spray somem Wd40 it make it so easy
@joelrios65079 жыл бұрын
where do i get a squirrel cage???
@FordTechMakuloco9 жыл бұрын
Joel Rios I know the dealer can get them.
@johncork33829 жыл бұрын
Joel Rios Amazon has them
@vicentegonzales38523 жыл бұрын
Tada!!!!
@uncle_creepy27433 жыл бұрын
hahaha new clip :)... so another way is to ask a pair of hands to hold the fan and tap on the axle with a lil hammer, motor is fucked anyways so ... that always werks for me
@TheBlkac14 жыл бұрын
Probably should've cleaned the wheel off before putting it on the new motor and reinstalling back into the car or truck....
@FordTechMakuloco4 жыл бұрын
If packed with enough dirt or debris to cause an imbalance yes but that was not the case with this unit. Here's why you don't want to clean it, you see those little black clips randomly placed on the fins? Those are balancing weights, do you really want to risk knocking those off by cleaning it thereby causing an imbalance and terrible vibration all because it looks dirty so you just couldn't leave it alone.
@myalaskalife58375 жыл бұрын
I am a Ford guy but that is the only thang i don't like about them