Ford Ranger / eBay 5 inch Lowering Kit $170 / Start to Finish

[@naception]

I have a 2000 Ford Ranger and a 2024 ninja zx6r. You sir, have great taste. 👌

[@lovelivegofast]

We enjoy the finer things haha 👍

[@DavidRamirez-kv9xc]

Loved every bit of this video. You are funny my dude and you went through all the struggles i always go through while wrenching 😂😂

[@rustandbeards]

After watching your video and seeing all the rust on your chassis, I am thankful to live in the southern US.. yikes!

[@erikstruss9327]

Yeah that thing's a rusted out fucking piece of shit. Rusted or not that's not even safe

[@gavanac132]

That rust is nothing

[@BradyBridges]

Thank God I live in South Mississippi lol

[@JohnAnderson-vc6po]

Bud, with you having the extended cab you're going to need the shim for the drive shaft to keep the pinion straight.

[@guskaheaku9356]

Please let me know more about this? I have a 95 mazda b2300 extended cab and wanting too go low

[@ikaikasrgnts8618]

Rust is insane. But, thank you for the video💙.

[@nedflanders5380]

Did you have to cut bump stops? Mines just sitting on them

[@MikeCain-w8t]

I wish they would make a lowering kit for a 2022 ranger xlt!!

[@leftcoastdrifter]

Looks great

[@tylertanner3716]

How low did the axle sit to the ground

[@juderamos1196]

Do you need a c notch in the rear and also a fuel cell? I have 3in drop leaf springs on mine and plan on going lower.

[@TherealWinterpillow]

for in the future. Clean the threads with a wire wheel before you try to take the nut off of the u bolt.

[@anthonyhess5855]

Buddy your sway bar is gone… I’m doing the same drop today, battled the rear half in the rain. Now to do the front tomorrow.

[@lovelivegofast]

Yeah the sway bar links were completely broken off so I pulled it off as I was waiting for links and doing other stuff. The finished product is worth the work!

[@anthonyhess5855]

Paid $1700 for my 5 speed beater with 159k miles. Looks to be in similar shape to yours

[@lovelivegofast]

Good find, this one was $700 lol I couldn't pass it up

[@anthonyhess5855]

You should do camber bushings next, that’s what my next step is. $40 to save the tires from being shot

[@blakemorris268]

Are those scallops and algea growing on ur shocks looks like the legs on an oil rig in the ocean

[@nedflanders5380]

How the hell did you get the coil spring off with a freaking wrench. I’m over here with a 1/2” Milwaukee impact, map gas, and a breaker bar with a cheater pipe. This is so unfair 😂

[@lovelivegofast]

I've done a couple now and just a wrench has worked on every one for me lol but every truck has different trials and tribulations 👍

[@jacksonkuehler671]

Awesome video my friend. I’m gonna be lowering mine with the same kit after watching this video. You answered all my questions… do I need new shocks -no. Is anyone else putting on this kit with a Midwest rusted out frame - yes. Can I do it in my driveway - yes. Thank you so much. After driving it for a month have you ran into any issues? What size tires are you running and do they rub?

[@lovelivegofast]

Haven't had any issues, I just have the factory wheels and tire size

[@jacksonkuehler671]

@@lovelivegofast the link you have for the Amazon kit, is that the same thing but with brackets you don’t need to modify? There’s a review on that Amazon product bashing the springs for not securing and being extremely dangerous? Are yours like that? I know in your video you showed yours being fine but go read that review and give me your opinion. Thanks

[@lovelivegofast]

Well when I initially looked at it, that Amazon kit looked like it would work. Maybe that one has its flaws too. Hadn't seen any reviews when I first came across it. I guess you could always do the eBay one and grind the axle flip brackets a bit if they don't quite fit out of the box. It's hard to know if the Amazon guy is correct or even knows what he's doing too

[@jacksonkuehler671]

Exactly what. I was thinking, maybe the shop is just a bunch of sissy’s haha. We sr out here throwing a 200$ eBay special on a cheap ranger it’s obviously not gonna be perfect. I think I’ll order the eBay one. Did you ever get your camber fixed? How hard was that ?

[@jacksonkuehler671]

@@lovelivegofastDid you ever have to do anything with your camber? Can you post a link for the kit or part you used to fix it. Thanks

[@classicstangbrn8964]

There is no wd 40 at least in your world .

[@davidcoronilla4295]

Description says brackets may need to be trimmed soo🤷‍♂️

[@wportillo95]

Would this kit fit the 98 "regular cab splash ranger" aka single cab 2 door side step?

[@AtomicReverend]

The axle flip and the rear will fit your Ranger... All small rangers actually but the front on your Ranger is independent suspension so it will need a different lowering spring and a lowering A arm. Your suspension started in 1998 and went until the end of the small ranger production which was 2012 here in the states. The kit in this video is designed to fit 1993 to 1997 Rangers with twin I beam suspension.

[@AtomicReverend]

They sell a lowering kit for your truck also and it is under 300 bucks for the front and rear for a basic kit and the plus side is you won't need a camber kit unlike a twin I-beam truck.

[@AtomicReverend]

One last thing in order to maintain a decent ride make sure to get lowering shocks with your kit, it's worth the extra hundred or 200 bucks for them.

[@JordanFran-J22J]

That was 27:43 mins of my life I wasted lmao

[@ashtonconley-jp7tv]

do you have a link for the kit?

[@lovelivegofast]

It should be in the description

[@deraldo313]

Good video but your microphone is the opposite of flattering

[@caughtafaygo]

Sounds fine to me. Get a better pc nerd

[@blakemorris268]

Rust will lower that sheesh

[@Ox78]

SSOoOOooO 💅

[@classicstangbrn8964]

Wait until you go to align that thing😂

[@Gmed11]

Wait what’s gonna happen?

[@ProbablyDj]

my '98 with 492k miles is in better condition than this thing. Good time to be in the south.