FORD SUPERDUTY NOSE SWAP FRONT END CONVERSION KIT F250 F350 F450 EXCURSION McNasty Customz

[@enriquegonzalez760]

You have made a lot of people life easier. Thank you!

[@bajamedic]

Keep it up boys, not in the market for this but what an awesome kit.

[@cap-mookie4780]

Yuze guys definitely did your homework! Very timely I might add - my '00 Excursion is getting upgraded. I'll be getting this kit for certain! Thx!

[@MrRanvic]

Cap- mookie any updates??

[@LamzLamz714]

Whered u purchase the kit? How much?

[@garykerney2488]

Great vid. I am looking for an excursion right now to do a conversion. I'll be buying your kit as soon as I do

[@austintomecko8178]

Great video! Really explained a lot of the questions I had about this swap.

[@eddiephothirath7512]

can you make a video for the 08 conversion?

[@hutchesonchris42]

Great vid, thanks for taking the time to do this. 11:11 don't arc that wrench on that battery

[@JMRRebuilders]

Good stuff. We are looking to do a 04 excursion. Thanks for the content.

[@TheTravelingTrucker96]

I’ve been following you for a while and love what you do but I have a question I want to do a conversion on a 2001 f350 but I want to put a road armor bumper on and was wanting to know if it will be possible

[@1curt12]

Awesome product bro. It takes time to figure out all the fab details

[@A1FBG_Mexico]

Definitely helped me make up my mind about my 03!!!

[@joeuscanga7235]

Great video. Are you guys going to come up with a 2016-22 kit in the future? Thx

[@puch7261]

i have an 06f250 how much will the kit cost to make it look like the 16 or 19?

[@David-pb1dz]

Thinking about doing a full coversion on a 7.3 excursion

[@bryanmitchell2014]

2000 f350 7.3 haha same right now

[@tommymulliniks9850]

If I’ve got a ranch hand style front bumper, can I still use my bumper with this kit?

[@jwfmechanical9864]

You dont see american built this way.... way too go!!! I am definitely buying!!!

[@nitroitch]

Great idea, project and video on nose swap. I’m definitely going to do this, but before I buy the front cap, What about doors for my extended cab 2001 as well as 8ft bed. Are they direct interchangeable to later model that would match the nose update? Or will they also require fabricated modified parts and if so what do you have?

[@McNastyCustomz]

all doors from99-16 bolt on and look the same. newer beds also just bolt on no mods needed

[@nitroitch]

@@McNastyCustomz ok great. I’ll be ordering from you: Fender kit, hood hinges kit, bumper kit with rail boxing. Anything else you suggest?

[@cowboys4life24]

Will you be able to attach a ranch hand bumper/grill guard replacement with this conversion? I don’t see where the tow hooks are on the video, or if this conversion takes them away?

[@trevormoen3488]

Hey, can I get tips on the inner fenders

[@WittedJewel00]

Is it possible to keep my tow hooks with the conversion

[@MiguelGonzalez-bx1zk]

Dam bro good video do you still sell this kit

[@leroijr407]

Can you do the same video for the 2008 conversion? That style will be what I buy from you. Its more rugged looking on my dually. The 2011 dually looks wimpy. The 2008 has the appearance of a wayyyyy larger grill next to the headlights and is WICKED SICK

[@amosholloway]

Very impressive! Can't wait to get my 99 F550! 4oe doe

[@billythegoat4793]

Sorry i didnt catch if anything was needed for the drip tray infront of the windshield? I will be buying this kit would you let me know everything needed for that thanks

[@specdoutrigs4336]

Explained everything on point

[@outlawcustoms3624]

I’m in need of assistance I have a 05 f-350 dually the cab is kinda rusty tor my liking however I have a complete cab with front clip completely assembled that I would like to sit on my 05 frame , who has done that kind of conversion & what all would I need to make it work as far as my harness & ac lines due to my 05 blower motor assembly being on the outside & on the inside on the 08 cab also the computer is mounted to the inner fender on the 05 & in the firewall on the 08 same as air filter is in the opposite side please inform me as to what to do to make the 08 complete cab & front fully functional on my 06 frame thanks

[@ALEJANDROLOPEZ-yz6tq]

I have a 2005 excursion and want to do the conversion to a 2016. How do you go about in wiring the new headlights to the old harness. Is there a harness kit to do the conversion? And if so could you please provide feedback on it. Thank you and awesome work by the way. I'm really looking forward in doing this conversion.

[@duallylover4566]

Do I trim the inner fender plastic?

[@dasteufelhund]

That accent blew the nose of the truck right off!

[@stephenlofton8389]

It might be because he had to drawl a line across the bumper mounts. He had a good idear in all the working of the mounts.

[@toryjones4415]

This video leaves a lot out. You will definitely need to cut a lot more metal out for the headlights to fit. Hood hinges will need to be slotted much more than shown. Upper fender mounts inside door jamb not addressed. Top fender supports where they attach to the core support had to be cut off for fenders and headlights to fit. Grill support will need to be moved around until gaps are correct. Be prepared to take parts on and off several times to get gaps as close as possible and by doing so expect the inserts to spin rendering them useless. I was a mechanic for 20 yrs and a paint and body man for several years. I have built many cars and trucks. I thought this kit would save me a lot of time but after 4 days of installing this kit and modifying the kit, I finally got a decent finished product. Not perfect by any means but acceptable for now.

[@flyman1185]

Why would I want to put pots on my truck?

[@jackhumble4867]

I have a 2000 f650 and i want to put the newer 2016 front end on it do you have any advice or pointers?

[@ramosivan407]

I wish they made a bumper conversion for f150

[@1g4u]

Dope 👍 Where is the shop located? Thanks

[@og6340]

I’m wanting to freshen up m 08 f 450 with 2012 bed and front end . Where do I get the kit to make it happen ?

[@wilmercampos5673]

I have a 2006 do I have to cut more that what u suggest? For the lights and fender?

[@jeffmedina4568]

Very nice demo

[@dracodrake45]

I'll keep this in mind if i buy a 99 to 03 superduty

[@biohazard7276]

can you swap a 2008-10 front end on a 2012? I'm interested since I lime those front ends better

[@leroijr407]

Exactly. They are wayyy better.

[@Deezulpwr]

Headed to your website now!

[@travisgelb5618]

When does the 2017-2018 brackets come out?

[@millerbartlett3453]

The doors are different

[@neomansia561]

Does anybody knows if I can use the old hood hinges and fender liners when using hood and fenders from a 2010 f350 to a 2002 f350?

[@lindomoreno7652]

where is your workshop

[@Sailor_23]

where can I get the fenders and the hood? to go with the conversation kit?

[@edwardfrazier8047]

Hey sir will I also need this kit for a 2008 model f550

[@joshcordova9413]

Do you make a kit to do a 17 front end conversion?

[@jr303official]

What if I wanted to go to a heavy duty steel bumper

[@erasmoanguiano2934]

Have you improved your painting for the brackets

[@hugavet3049]

Can we the brackets painted McNasty Green? OR can you ship them raw and I'll paint them myself?

[@FERNANDOBBC]

Will this conversation work on my 2005 F250 Gas Engine?

[@McNastyCustomz]

yes sir

[@alekso.6428]

McNasty... Do you have any instructions on cowl + wiper linkage swap as well? I have completed front end swap using your brackets but now got stuck with cowl & wiper linkage. I would really appreciate it.

[@McNastyCustomz]

Aleks O. we have a video for that also on this channel

[@chrisroberts2617]

Do u do f150 kits

[@gregorygraham9181]

Niceeeee where you located

[@rfreemanmodeling]

*I have an Excursion that I'm ready to do this to, I'd like to use the fender that you're using on the truck not the Excursion (F550 fender) because my wheels are very wide and I want to be able to get as much coverage with the flare as possible. My question is how can I get a matching flare for the rear? It's gonna be very noticeable if I leave the rear fender flares unaddressed. Please tell me there's an option for the rear flares, I can't find anything.*

[@rfreemanmodeling]

@McNastycustomz I'm ready to purchase, just need help for the rear flares if possible.

[@McNastyCustomz]

just a quick search and i found these www.amazon.com/2000-05-Excursion-EGR-Rugged-Fender/dp/B00M9E0K7S

[@keithboyer3210]

Very cool, I'm planning to do this to an 05 Excursion. I will definitely be ordering your kit. How much do the new body panels cost?

[@rolandthethompsongunner64]

Might want to find out before buying a kit to put them on your truck.

[@wilmercampos5673]

For the hood lifts do I used the originals?

[@JonJones-lb7nd]

How long does this approximately take to do start to finish?

[@albertofreire6458]

I need purchase full parts cabin FORD RAPTOR used rebulding year: 2018-2020

[@mattread6587]

Will they support an aftermarket steel bumper?

[@petercokely640]

Can I buy just the right fender bracket?

[@demonwaker22]

Will the super duty brackets work on the Excursion? Im trying to find a 2016 excursion front end conversion but i can only find 2017+

[@McNastyCustomz]

Yes they do .. visit our website

[@scrapyardbuilder1989]

He said “open up the rear hole”

[@carlspackler91]

Giggity

[@nick-kf4zj]

so how much is the kit for a 08 swap and do u have to buy a new hood??

[@dwheeUSA]

Hey McNasty. How much it will cost if you guys do this job at your Garage from A yo Z including parts?

[@McNastyCustomz]

$2200 labor to install nose, no paint

[@dwheeUSA]

@@McNastyCustomz How much you estimate it with parts?

[@Sleepvroffical]

I bought it,and my grill sits too high. So it makes my hood sit too high. I did it exactly like the video.

[@zachariahriddle1563]

Did you ever work this problem out?

[@yasmincampos1755]

I have a 09 ford f 150 that I want to convert to 2016 will this rock how do I get in contact with u

[@McNastyCustomz]

we do not have anything for a f150 sorry

[@willdurrant9826]

So notch the frame 1 1/4 inch front the front of the frame in

[@amtrckrdave]

I have an 03 f250. I found a front clip from an f250 diesel. Will the conversion still work?

[@McNastyCustomz]

yes it will

[@leonelocana3653]

Muy bueno .....exelente .. los llamare desde Panama

[@keithpankey7090]

Any for the 97-07 swap to 2008

[@tonycaro623]

I have a dually 2007 I need a new conversion from where I can buy it

[@McNastyCustomz]

Tony Caro mcnastycustomz.com

[@leroijr407]

Get the 2008 style.

[@winolaautomotive1131]

Does anyone know if this would cause a state inspection issue? Specifically for PA state inspection?

[@McNastyCustomz]

swapping the front end? never herd of anything like that.

[@robborges2160]

Just discovered this. I'll be giving you a call

[@Gofast8954]

I’ve got a 2002 F250 7.3 id like to convert it to a 2014 Is that possible ?

[@McNastyCustomz]

yes . kits at mcnastycustomz.com

[@juankilozada2935]

Hey I have a 99 super cab not the dual cab does it matter for this conversion with everything you used

[@nicholaslandolina]

Juanki Lozada Probably not

[@iaves1383]

Anybody have a parts list for 07 f250 to 11-16 front end as far as body panels and will I need an 11-16 hood?

[@McNastyCustomz]

at the top of our page in the instruction section we have a full parts list, mcnastycustomz.com

[@joestamper5649]

how much for the kit and bumper kit 06 f350

[@dogoargentino1420]

How much you charge to do the same frond end on my f350 2000?

[@McNastyCustomz]

please contact us via phone for pricing 774-225-7325

[@LifeWidBlack]

Will be ordering one

[@edwardfrazier8047]

How much is the kit looking for it

[@papichulo110029]

What's a nut cert?

[@nathanbollinger5371]

Decent Videos👌

[@abumuhammad40]

Where u located

[@rustybrowneye]

i have a snow plow on my truck, i wonder if this kit would still work. i doubt it

[@durancarrera]

Tha braket work for 2017 ?..

[@McNastyCustomz]

no

[@juliangutierrez4064]

I have a 2003 Ford excursion and I want to change the front end how can I do that

[@McNastyCustomz]

our Bracket kit allows you to bolt on the newer upgraded front end visit www.mcnastycustomz.com to order

[@fordnut4914]

I actually like the old nose better. Looks more rugged.

[@harrington6225]

Great video!! I have 01 EX where can I find that bumper,to fit your kit do your kit come with new bumper,also did owner replace cowl,and wiper motor!!#2016frontswap

[@yo-ge5xm]

I'm sure it's different in all states but do you have to tell the town or something like that to convert the trucks look since it won't look anything like it did

[@luckyred831]

no. The only thing that matters is the vin number on the body. the body vin number indicates identification of a vehicle. everything else is considered a modification. my avatar is a 1959 f100 truck body mounted to a 2015 race car. they call that a restomod specifically. this is a simple body mod.

[@fordnorriss]

Cant find hood or fender or grill someone let me know where I can find all the parts

[@JosephSamsor]

Chris Norris maybe just try a ford dealer. Or junk yard. You can find bits and pieces that look brand new for cheap

[@slyr1]

can anyone bring there truck over so you can do the install? And if so what would it cost

[@abumuhammad40]

How can i buy from u

[@livingoutloud2115]

I have 2003 ford Econoline i want to do a conversion to a 15 front end where can i purchase a kit

[@808gunz9]

I read on the E Series from 92 to now it's the same, just need a braket or cover or something to bolt on but it's literally the same

[@getblown7891]

How much are the kits?

[@ask_X87]

How do u order

[@Chunkylifehealthyfuture]

Whats the website of the kits?

[@McNastyCustomz]

mcnastycustomz.com

[@stevedemoe1359]

Anyone els doing this in 2024 😂

[@McNastyCustomz]

we sell 10 -20 kits a week.. so yes..

[@BenjaminHernández-c6f]

Any Phone num,?​@@McNastyCustomz

[@santoscoss3126]

Where are you located?

[@McNastyCustomz]

assonet mass

[@frankvacanti5277]

Can i just pay you to do it for me? 02 F250. Side veiw mirrors too

[@McNastyCustomz]

we are not taking installs in at this time.

[@jtsmg]

How much is this kit? Can you guys do a video for the 2008-2010 conversion. I have all the parts to do my 01 conversion..

[@McNastyCustomz]

All kits and prices can be found at mcnastycustomz.com in the store section.

[@hugoremes903]

McNasty Customz