Ford Superduty. Upgrading to LED lights. Ford F-350 Flasher Upgrade

[@markmyers8752]

Wow, sifting the fly poop from the pepper really paid off! Of all the videos I have watched for this job, this is EXACTLY the video I needed to see to do this. That is EXACTLY my dash. That is probably EXACTLY the procedure the techs used back when our trucks were new. No tools, no contortion, no blind feeling with arthritic fingers. Just boom! In and out. Thank you a thousand times.

[@gregstevens3530]

I wish we were neighbors I would shake your hand. You made this so much easier than the 10 other guys I watched . Thank you so very much.

[@thebtgshow]

Your a rockstar man😎 truly appreciate this video

[@carolinawestern3875]

Got the same issue w/a 03 Ford F250. Owner built a custom, steel, flatbed for a welding set up, with L.E.D's. 3 button type on each side, and 6 ovals with a 14in center cluster, across the back. The turn signals blink fast, and all but the headlights stop working Not far in it yet but I've found 2 blown fuses, and a lower than factory gauge wire. With cheap splice connectors, you'd find at a dollar store and come apart with a light tug.

[@raybishop4121]

What year is your F350, and where did you get the trailer brake controller? I like it!

[@covetthecamper2289]

2007 with the stock brake controller. (Tow package that includes the 2nd alternator)

[@johnkillen588]

THANK YOU!

[@covetthecamper2289]

👍🏻

[@outdoorswithlarryrobin]

any issues With the Ford? Hauling my Lance on a 2003 Dodge 2500 Ram now 231,000 miles, we with be looking for 1 ton soon

[@covetthecamper2289]

I really like my 2007 F-350 now. Keep in mind that I’ve done a ton of upgrades. Back in 2015, I did the full 6.0 Bulletproof including the head studs. In 2018 I did the a full stage 2 heavy duty build on the 5R110 transmission. Along with the suspension upgrades, I’m very happy with the performance and reliability. I did most of the work myself excluding the transmission so it’s nice to know I can do the work if/when needed in the future. The new Ram, GMC, Chevy and Fords are all really nice but all have their own issues. I’d say, go with what you like and learn to do the repair and maintenance work yourself if possible.

[@juliushalmos3531]

I have an 03 dodge also but it’s a 1 ton single rear wheel in my truck campers too big for the single wheel so I just found a used dully axle and installed that. Just make sure you get the springs for the 1 ton (I didn’t so my airbags work extra hard to level everything up) you can do that with your three-quarter ton also. I did this work because my pick up truck is paid off and I did not want to make payments on another truck

[@dontblameme6328]

Don't buy a newer one with DPF regardless of brand.

[@Turtlesoup669]

Thank you

[@lazaromartinez4780]

Sooo if I put led switch back turn signaling the front of my f350 do I need to do this so it blinks normal?

[@covetthecamper2289]

In most cases, yes.

[@juliushalmos3531]

I need to do the same thing for my dodge pickup how do I know which relay I need to get from the auto pats store and will I need one for my brake light also because my turn signal and brake lights are separate turn signal flasher is really fast and the brake light comes on really quick and shuts back off

[@covetthecamper2289]

I think it’s LL552 or LF12 for Turns and EL12 for Hazards on the Dodge Ram 2003. Your local parts store will know.

[@shagmail]

I had a bulb burn out on the rear turn signal so I bought rear LEDs and that same flaher. Works perfect, no hyperflash EXCEPT for one problem. When i turn the truck off (ignition) the relay starts clicking at about half the speed of the normal flash. None of the lights actually flash but the relay clicks. I tried a BWD flasher sitting in the parking lot of Advance auto where I bought that flasher and it does the same thing. The factory ford flasher doesn't to that but hyperflashes. I have no idea why. Now I'm driving with the stock flasher and the lights hyperflash.

[@justthejuan8160]

Same here

[@elmerrodriguez9894]

I couldn't find it on a ford f250 year 2012

[@covetthecamper2289]

2012 model year does not have a relay. Blinkers are done through the BCM. You’ll need the ForeScan interface to change.

[@elmerrodriguez9894]

@@covetthecamper2289 Thanks a million for answering. I got crazy trying to find it.

[@elmerrodriguez9894]

@@covetthecamper2289 may you please do a video about it?

[@minez4088]

I am unable to locate the flasher relay for my 2008 f250. Can you give me some advice?

[@jeremyd419]

​@@minez4088you have to do resisters or forescan programming. I have a 08 as well