Ford Transit custom Engine service procedure 2.2 TDCI

Step by step Guide on how to carry out engine service on 2013 Ford Transit Custom 2.2 TDCI.
Engine oil and filter change, Air filter replacement, Fuel Filter replacement & Bleeding the system and how to reset the service light. Service carried out using aftermarket filters & 5w30 OE spec Engine oil.
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Check Euro car parts for filters etc - tidd.ly/3lIO7xA (use discount codes on site)
Check out the diagnostic machine I use - diydaly.co.uk/products/phoeni...
Genuine Ford full service kit Ebay - ebay.us/ADlCWM
Brake cleaner eBay - ebay.us/57pfYI
Tools :
3/8 Digital torque wrench - amzn.to/2PP9vpP
3/8 standard torque wrench - amzn.to/33eZsxj
Socket set - amzn.to/3eGx2Ak
Brake cleaner sprayer - amzn.to/2BLF1gX
Long reach 3/8 ratchet - amzn.to/3iJsADg
Ring Inspection Lamp - amzn.to/3gGWHcG
7mm hose clip tool - ebay.us/YgHMGz
Fuel filter removal tool - ebay.us/FsDXNw
Milwaukee 3/8 Drive Mini Impact driver - ebay.us/Pg8ilg
Oil filter sockets set - ebay.us/Kw9R5E
Shrader valve removal tool - ebay.us/5QpUCd
Oil drainer - ebay.us/EiIAxV
Angled funnel - ebay.us/k7dKN8
Oil capacity :
6.5 Ltr 5w30 fully synthetic engine oil
Torque settings required:
Oil filter cap - 25 NM
Sump plug - 39 NM
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. kzbin.info?...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay!

[@diydaly]

Genuine Ford full service kit Ebay - ebay.us/ADlCWM Brake cleaner eBay - ebay.us/57pfYI Tools : 3/8 Digital torque wrench - amzn.to/2PP9vpP 3/8 standard torque wrench - amzn.to/33eZsxj Socket set - amzn.to/3eGx2Ak Brake cleaner sprayer - amzn.to/2BLF1gX Long reach 3/8 ratchet - amzn.to/3iJsADg Ring Inspection Lamp - amzn.to/3gGWHcG 7mm hose clip tool - ebay.us/YgHMGz Fuel filter removal tool - ebay.us/FsDXNw Milwaukee 3/8 Drive Mini Impact driver - ebay.us/Pg8ilg Oil filter sockets set - ebay.us/Kw9R5E Shrader valve removal tool - ebay.us/5QpUCd Oil drainer - ebay.us/EiIAxV Oil capacity : 6.5 Ltr 5w30 fully synthetic engine oil Torque settings required: Oil filter cap - 25 NM Sump plug - 39 NM

[@ariantaria2065]

Your videos very well explained. Step by step including tools torque settings..not many youtubers like you. Thanks for your time and effort you share

[@diydaly]

Thanks 👍 feedback always appreciated

[@JohnJohn-xv5sx]

Litterally the best video ever for engine service ! It is clear well edited, complete, with tools references, torque,. Congrats man for this job that helps a lot !

[@diydaly]

Thank you very much! Comments much appreciated 😁🙌

[@JohnJohn-xv5sx]

Engine service done today ! Thanks again! Could you please made a video or juste answer the question about the rain comming from the bay that goes into the engine beacause of bad conception and leaks over the electronique module ! Did you guy got this problem to ? The rain drain from the bay to the wipers hole and under the plastic clips at the corner it goes on electronic just near the fusibles module

[@diydaly]

@@JohnJohn-xv5sx nice one, glad to hear it! Yeah I’ve come across that issue before mate 👍

[@lukemcgivern292]

Good detailed and easy to understand as usual 👍

[@diydaly]

Thanks Luke! 👍

[@dreiauge4553]

Thank you! Very helpful for my Transit MK7-Camper. With EU5 it hast nearly the same fuel filter like in the video!

[@diydaly]

👍👍 thanks for the comment

[@jamiekennedy804]

Great video, watched this then serviced my 2015 tourneo with ease.

[@diydaly]

Glad it helped

[@bennoben1653]

Great video mate , thanks for sharing 👍

[@diydaly]

Glad you enjoyed it

[@ianmaclean9567]

Great video very well explained many thanks

[@diydaly]

Thanks Ian 🙌

[@castrolgtx5064]

Much appreciated thanks for sharing the video 👏💥

[@diydaly]

Thanks mate 🙌

[@kevinbond3088]

Excellent video. Thank you

[@diydaly]

You are welcome!

[@ifell3]

Got me subbed. Looking through your videos to see how good or bad these engines are now!

[@diydaly]

🙌🙌👍

[@paullynch1938]

Great video dude

[@diydaly]

Thanks 👍👍

[@bobbrown9783]

Great video clean and very well articulated I also have warning signs of passenger rear door open when I’m turning right and rear brake light fault (bulb is fine) any suggestions on how to fix this please

[@diydaly]

Thanks! Afraid I’ve not had many issues with them faults

[@Mr-D-Rickman]

Great post Ty

[@diydaly]

Very welcome

[@alanrumford3254]

good man 5 stars

[@diydaly]

👍thanks

[@SimonLloydGuitar]

the best engine for a transit..no stupid wet belts or adblue.

[@diydaly]

👍

[@user-paullynch]

@@diydalycouldn’t you just press the fuel valve when on position 2 to save removing the valve dude or have I missed something 👍🏻

[@diydaly]

@@user-paullynch yes mate just abit cleaner with the pipe on

[@user-paullynch]

@@diydaly great video mate , doing mine some time this week , thanks dude

[@diydaly]

@@user-paullynch thanks

[@gavh888]

thanks good video

[@diydaly]

You're welcome

[@matthewcampling488]

I really appreciate the time and detail of your videos mate. Very very helpful. I’m about to do the fuel filter on mine. My Haynes manual mentions all sorts of stuff about priming the system using a hand pump, do you think this is necessary? Seems so simple the way you did it!? Have you ever had any issues doing it your way? I’m wandering why on earth the Haynes manual suggests it if you can do it so simply by connecting a pipe and a container like you did! Thanks again for helping others with your videos, your efforts don’t go unnoticed! 👍👍👍

[@diydaly]

Thanks for your comments! Much appreciated .. yeah you won’t need to bother with all the Haynes manual stuff! I do it like this all the time, it’s mega strait forgot and I’ve never had any issues 👍👍

[@matthewcampling488]

@@SimonLloydGuitar yeah… that’s fair. They can sometimes have so good bits of information for the amateur DIYer like myself. I used them a lot many years ago, but as you say maybe they’ve gotten worse over the years. Arguably not as good as an OEM workshop manual. Why I appreciate videos like this, decent forums and actual mechanics that work on cars day in and day out sharing info online. 👍

[@sam_i76]

Hello! We have very similar van and i have a question about battery replacement. We have one batt under the drivers seat and my question is,can i just plug old off and install new like we did with old cars or do i need some spare power for it when disconnect battery? Thanks for this great and simple video!

[@diydaly]

👍 you can just unbolt and replace

[@sascasasca9879]

Perfect

[@diydaly]

👍

[@MrLoyalss]

Is it not possible to run the fuel pump to vent the fuel system?? I always do so at Volkswagen

[@diydaly]

Doesn’t work very well on these

[@justintime1307]

Howbcan the timing be done, why does the cover need changed while doing the new chain

[@diydaly]

Because you can’t get them of without damaging them usually

[@lovepreetsinghhanjra1997]

👍🏻👍🏻👍🏻

[@diydaly]

Thanks mate 😁

[@Neil-Aspinall]

I can't get over the rust on screws and underneath?

[@diydaly]

Standard ford haha

[@Neil-Aspinall]

@@diydaly Is this to today with the Transits or did they address some of the rusting issues later?

[@diydaly]

@@Neil-Aspinall there not as bad as the older ones tbh

[@Neil-Aspinall]

@@diydaly That's good to know as I am thinking of purchasing a 2020 model.

[@user-nt5ji7ee9c]

zmrde sindej ten airbox