2009-2012 Ford Escape Electronic Throttle Body Replacement

[@Jewell579]

Hey man, thank you for putting the time in to make this video for us. My 2009 Escape died trying to drive in to work this morning because of the throttle body. After some research, finding the part at a local shop, and watching this video a few times, my car is now fixed and will be usable for Thanksgiving tomorrow. :-)

[@nickolasconnor3661]

instablaster.

[@chriscline5716]

Same here 2023

[@jimscalm3231]

It definitely broke down weeks later in exactly the same fashion from the mass air flow sensor.

[@skiptownsend809]

I haven't even watched this video yet, but based on past experience with your channel, I have no doubt I'll be able to replace the throttle body on my wife's 2010 Escape. Every time I need to work on her car, your videos pop up and they are always perfect. It's to the point that I don't want to consider a vehicle for purchase unless I know there's a great KZbin channel like this to go with the car! Thank you!

[@FordTechMakuloco]

+Skip Townsend Thanks yes these are very easy to change.

[@swavada91]

@@FordTechMakuloco is this similar to the 14 escape

[@danschiess9788]

Did this fix this morning with my son. Little different on a 2010 3.0L XLT, but general concept the same. Thanks for posting this years ago. Good man.

[@sammiessaa1361]

Thanks for this video. 10 years later it’s still helping us noobs out 🤞🏾

[@svill931-7]

Thank you for sharing your video! I am a complete novice and can’t even change my own oil, I followed your video and changed my throttle body today. You saved me a lot of money and really helped me. Thank you!

[@koonelos]

Did you do the repair yourself or did you have a mechanic do it? Do you need to connect the car to a computer? Thanks!

[@Captain_Howdy99]

My 08 escape just had this issue, tore it apart and cleaned it all out and it was maybe an hour job for me, good video 👍

[@cliffordyawn4867]

I want to thank you for showing how to disconnect the electrical connection. This is one of the best explained videos I have seen. A lot of the technicians will show you everything except how to disconnect the electrical connection and explain

[@zacharymoore5555]

Thank you for submitting this to KZbin it helped me pick out the mechanic who actually knew what he was talking about. Almost went with the other guy and would have been disappointed when my car didn’t work. There’s a lot of knowledge in your video. Thank you very much

[@johnson554671]

5:45 Wow I love your explanation of cascading effects. Very informative.

[@HARLEY05FLHT]

Mak ... I bought a 2009 Mercury Mariner 3.0 V6 with 122K on it last Dec. I noticed it stalled on me a couple times and doing some research I thought it may be the Idle Air Control Valve but after doing a more research I found out that the second gen (09 to 12) it is built in the throttle body thus me watching this video. One more thing the symptoms is it only will stall at an idle in gear or not in gear ... and I noticed the warmer the weather the more it stalls ... it barely did it in the cold months. It will always start right back up and never had an issue while driving down the road. So I got a new Ford throttle body and did the change like you show. I did the reset for the PCM. Got it all back together and did the restart to let it idle and 10 minutes into the idle process the engine stalled! Restarted it and ran for about 5 minutes and stalled! After about 20 minutes of idle I drove it and when I came to a stop it stalled ... it did this a couple times. Pulled into the driveway and put it in park running and after a couple minutes it stalled. No check engine lights and nothing on the code reader. Do you have any idea what may be causing this. When the engine is running it runs smooth and idles about 700 rpm.

[@HARLEY05FLHT]

Update ... Mak I come across a video with the exact same symptoms that I am having (Ford Fusion Stalling at Idle) video. So, he is saying it's a low-pressure sensor, but this is on a 2014 Ford Fusion. Thought this would be the fix but I do not see a low-pressure sensor anywhere on my 2009 Mercury Mariner 3.0 V6 fuel line and the only thing I could find out was there is only a fuel pressure regulator in the fuel pump itself ... would you think this would cause the same issue? (Only stalls at idle in drive or in neutral.) other than that runs fine! Thanks!

[@JRG2877]

I want to seriously thank you for the vido, I've had my check Engin light on for a long time, then my 2010 ford escape 2.5 xlt started stalling on me and the idel was all messed up, I brought her in multiple times and my mechanic kept changing all kinds of sensors really the mass air flow sensor and few other valves....well it kept on doing it so I took to the internet and started doing my own research and found your video, against every body's suggestions I went ahead and changed out the electric throttle body myself and I am very pleased to say it's been over 200 miles no lights the truck is definitely running better it's fantastic. Well done . You should be very proud of yourself 🖒

[@koonelos]

Jeffrey, I have the same issue and don't know if I should do it myself or not. Have you had any issues since you replaced it yourself? Thanks!

[@robmitch1232]

Thank You I have a 4.6L and had the battery disconnected for a week or so. I used your relearn video and BAMMM... Runs like a champ.. Thank you sir for the kind person you are for helping people with all the would be very expensive problems that the steelership would take advantage of. Which I did call them and they wanted me to make an appointment... Ya Ok !!!

[@CalebBuxton]

Thank you so much for the posts! with this one, the PCM reset video, and a few others of yours I was able to diagnose the throttle body issue. I used your Amazon links to order all the parts and plan on doing the install soon! Thank you for saving me hundreds of dollars and providing some great information!

[@FordTechMakuloco]

Thanks for supporting the channel!

[@Vanni_x]

FordTechMakuloco hey sir, I have 2 a problems with my 09 Ford Escape xlt When I’m driving the ac is off and still the air is coming from outside to inside of the truck like the ac were still on. Do you know what’s the problem ? And also when I’m driving it sometime stops the speed by itself and start vibrating.. I have to turned off the truck and wait a little bit to turn it on and it works fine. Do you know what problem will be? Thanks I hope you can understand me lol

[@SomeCuts]

Thank you for these awesome videos. You have saved me a lot of frustration between the throttle body replacement, mass air flow sensor cleaning, clearing the PCM and the relearn procedure. Followed those and my 2010 Milan is running great!

[@jamietaylor3851]

Thank you so much for your in depth, easy to follow video AND for listing the parts used in the description...you just saved me so much money from buying the part at an auto store! Because of your easy to follow instruction, I can fix my car by myself and save SO MUCH $$...thank you!!!!!

[@Joshtheweatherman]

Thank you for making this video! Mine didn't fail, but it was extremely dirty, so I cleaned it with some carburetor cleaner. Now I can accelerate normally without surging in 1st gear.

[@littlejimi570]

Awesome video. You helped me alot with the theory of operation (break down part) where you talked about the relationship between the throttle body, air flow sensor and the transmission shifting well or crappy. Thanks so much.

[@fujimandkimyates3206]

This is also common issue on the Ford focus 07 and up..... I just did the same thing a few weeks ago. Clean the throttle body. Clean the air intake box. and also clean your battery cable if they are corroded. This made motor and transmission both happy. Stopped crazy transmission shifts ....

[@glennschock973]

All I can say is thank you very much. $129.00 and half hour of work and all good. THANK YOU for posting this video!

[@antoniopankey5581]

Where did you buy this part? I can't make an OEM number out on any screenshots, I do not know a great site to order this part at. Any recommendations? Or at least the part number?

[@sgerbig]

The code on my 2009 Escape says I need a new throttle body assembly. Unfortunately, my 10-year extended warranty ran out in October. The dealer gave me an estimate over the phone of $685. NO WAY. Thank you so much for your helpful videos!

[@mattlamb5183]

Bro!!! Thank you for this video! Saved me a ton of time and money. Totally fixed my issue on my 09 escape.

[@lambridder]

thanks for posting this video. it saved me a couple hundred bucks at the dealership.

[@koonelos]

Did you do the repair yourself or did you have a mechanic do it? Do you need to connect the car to a computer? Thanks!

[@k2060294]

Dude. Highly thankful with you. Excellent video! I never did this before but this video is easy to follow. My car performs as new!

[@mattgervais7926]

Appreciate this video greatly. Fixed up my 2012 Escape right away.

[@koonelos]

Did you do the repair yourself or did you have a mechanic do it? Do you need to connect the car to a computer? Thanks!

[@mchris1201]

Thank you for sharing your knowledge. You helped me in fixing my '09 Ford Escape. Runs like new now!

[@Vanni_x]

mchris1201 what was doing wrong ur Ford Escape ??

[@alejandrocabrera3380]

Thank you very much for the video really helpful... one question... about the car computer reset when you finish the installation... is that the only thing I have to do?

[@firozju80]

Yes

[@someguynamedrob]

Great video. I followed it step by step with no issues.

[@LanceWheeler-sr2xr]

So on an escape hybrid...how do I keep all the accessories off and keep it running, so that it will get to temp and learn all the trims?

[@ph3011]

Thanks for helping out! Did this job on a '10 hybrid. The relearn process is different. The vehicle idled normal right way. A little low idling, but not much. The car doesn't heat up unless under load as the computer is always trying to cut the ICE off and go into EV mode.

[@ferg1171]

just replaced mine with version d all fixed great work thank you

[@rworsley4909]

This is an excellent video and made it simple to change the throttle body on my escape.

[@willie-vj4ms]

Thanks my friend. Would it be a good idea to also change your aur filter if it hasn't been changed in a while?

[@wgrillojr]

I found not telling a shop what I think the problem is gets my repair done correctly. If I say what I think it is they seem to focus only on changing the parts I mentioned and not finding the actual issue. I wish I could find an honest place near me.

[@MCALL99]

Hey, great video do you recommend cleaning the body if there are certain throttle issues? I'm having issues after I change the battery the sensor struggles to "learn" the correct position of the valve and I'm not sure if cleaning it is a good idea, I could damage the sensors. Thank you.

[@jarredhowardii8669]

I was having the same problem. I looked into it and realized that Ford had a recall on their vehicles for this specific reason, so if you are having this problem take your vehicle to your local Ford dealer and they will fix/replace it for free.

[@muskwa8355]

The fuel needle on my 2012 Ford Escape was reading E although the tank was full. The dealer diagnosed the problem and suggested that I change the "fuel sender connector" (at an estimated cost of $700). Since I had already spent $100 for the diagnosis, I had a friend look at it (the "sender" is just below the back seat on the driver's side, and easily reached by flipping up the backseat)). He gave it a few shakes and the needle is once more working perfectly (2 weeks now). Could this be an electrical problem? Or some sort of shortage?

[@ericmayhood986]

I had a problem that resembles to the t with what you've talked about and showed in ur videos. My problem was a two pronged plug down in front on v6 engine was completely bare

[@1TELLAURA]

Thanks for this post ... I used this info to fix my 2009 Flex ... worked perfectly.

[@koonelos]

Did you do the repair yourself or did you have a mechanic do it? Do you need to connect the car to a computer? Thanks!

[@dangerousdave74]

Great video and very helpful for my Ford Focus 2.0 petrol over here in the UK. I just want to ask what the black plastic hex screw does on the throttle body and if it can be fine tuned using a scanner. I suspect mine is out a bit but I can't find any literature relating to the screw anywhere. Can you help me please?

[@hernanholguin]

hi, I really appreciate the info that you provide, it is very helpful; I have an Escape 2010, the engine blew and I had it replaced; after it was replaced it began shaking when idling at a light or just not accelerating; I took it to the mechanic and he said it was the gas pump,I replaced the gas pump, then the ETB, also the Air flow reader (or something like that) and the coils, and it has new spark plugs, and still it continues with the shaking; it does not do it when in Neutral; do yo have any suggestion? thank you in advance, HH

[@stefdero5672]

does this part fit on a 2010 Mazda Tribute with the ford 3.ol engine? Mazda seems to have a different part number for twice the price, but they look identical

[@MikeAldercreative]

Thanks a lot for this video. It was very clear and understandable. I feel like i can do anything when i have a good video example. This was great!

[@bradensonsoram4850]

Hi and thanks for the video. I have a 2010 Ford Escape XLS with throttle body issue. Just got the part in the mail. Beside installing and cleaning, any scanner or diagnostic tool used to reset the PCM? I would really appreciate your input on this matter. Thanks

[@FordTechMakuloco]

Follow my throttle body learn video

[@chelseyashtonzunti2696]

hi, thanks for the video it helped me lots. I changed the throttle body about 4 or 5 days ago and followed your video step by step however and my way home tonight it stalled out again at a red light. Any suggestions on what I should do next? No check engine light or wrench light came on. About a month ago I was having issues with the "check fuel inlet" and watched a few of your videos and the check engine light has not came on since. Could the canister purge valve have anything to do with this? I was going to change it but did not as that problem seemed to have gone away. Unless I got another bad throttle body from ford, but I am guessing not. Just when I was feeling comfortable letting my wife have her vehicle back safely.... thanks again!

[@pablogargallo8913]

same problems here... did you find the problem?

[@stephenhuff1647]

Hi FordTechMakuloco, the replacement part you recommend and that you linked to on Amazon is "DS7Z-9E926-D." The part I received from that link has a sticker on it that reads "DS7E-9F991-AJ." Is there any way to verify that the "AJ" part is OK to use instead of the "D" part? Should I return the "AJ" part and keep trying to find the "D" part? I chose the highest rated seller at that link, so I'm wondering if the "D" part is even available anymore. The Amazon page and the part box still show the "D" part number. Thanks.

[@nimar6425]

thank you for all the videos. on a 2010 does the throttle body act as the IAC as well or is that separate? Extended crank then start problem. followed this (cleaned throttle body and MAF, reset pcm, etc.) issue persists. thx

[@abl001]

Thanks for the video. What kind of bolts are those which hold in the throttle body? lost one like an idiot while changing it out.

[@dannielledickinson672]

Thank you did Ford ever place a notice there was an error indicating issues with throttle body

[@ken0077g]

Excellent video, very informant , clear , easy to understand, ....Thanks for posting.. !!!

[@norcor5284]

Would the learning process and draining the capacitor for the PCM work the same for a 2010 Ford Taurus SEL V6 3.5L with a push start?

[@FordTechMakuloco]

Yes

[@mounbakko5871]

… great education… good teacher.. thank you

[@curtisanthony8578]

Great video and information on the throttle body. I just replaced mine and finished the test drive. Only issue I have encountered is after i pulled into my driveway, I put the car in park. I slightly tapped the accelerator pedal and my RPM's went up to 2000, came down to 1500, back up to 2000, back down to 1500, then came down to around 900. Did not experience any surging during my test drive.

[@FordTechMakuloco]

+Curtis Anthony It was still learning the throttle angle and was trying to prevent any chance for a stall out.

[@curtisanthony8578]

Good deal. Next day it drove and idled like new. Thanks.

[@r-k-9_128]

Thank for the video, My 2008 escape is having throttle body issue as well. Wanted to ask if the 2009-2015 throttle body is compatible with 2008 or is it a different type

[@MichaelAlvez]

I own a 2008 as well and I'm thinking it uses the same one? Body style of 2008 is same. Hopefully +FordTechMakuloco chimes in here?

[@donaldhollums3278]

I have a possible up coming job for replacing the throttle body on a 2010 Fusion with the 2.5L. I don’t believe it is the hybrid model. All your described procedures showed be pert near the same, correct? What about the idle air control motor, is that a necessary replacement or only if it’s not functioning?

[@drdbailey]

I have a 2013 Escape. Ford maintenance says the throttle body needs to be cleaned. I would rather do it myself than pay the $150. Is the removal essentially the same in the 2013 as it is with your above video? Ours is a 2.5 liter, S model. Thank you in advance.

[@knightwizaed6921]

Thank you changed mine out per video instructions, thank you

[@shannonstringer5266]

Anything on a 2014 escape 2.5l idle hunt/surge/fluctuating and intermittently stalling. Even with new throttle body. Please and thank you

[@davidlewis545]

Hello, I having trouble with my 2015 Ford Escape Titanium 1.6 turbo. 145,000 miles. I’m having surging / pulsing while accelerating, even on cruse also. I’m not getting any lights or codes. Just wanted to rack your brain on what could be the likely cause. Thank you!

[@laurielewis5577]

On my dash board the little wrench light came on and all my research suggests that it's the throttle body. So my question is does that light come on for other things or is it defiantly the throttle body? I don't wanna replace it and it be something else.

[@MsJoytay]

Laurie Lewis did you have to replace your throttle body

[@MrFatcat23]

Check out Ford “Customer Satisfaction Program 13N03-Supplement #2. This 13N03 isn’t a recall but the dealer will replace the throttle body at “no cost to the customer” according to the supplement. This CSP 13N03 also describes the “Wrench Light” and what it means.

[@TheSamo4u]

thanks for posting such a video, I have replaced the brake booster in my fiord edge 2011, after replacing it brake issue solved, but another issue raised which is I can't speed up more than 40 miles its like even if I accelerate harder still won't let me please advice or give me guidance to the causes of this issue, appreciated bro.

[@percyford2448]

great video very helpful. will disconnecting the battery on a 2011 fusion v6 3.0 SE flex fuel reset my pcm and relearn my throttle body because I think it is causing my car stall in-between 40mph and 60mph. I replaced the spark plugs fuel pump maf sensor and this is the third throttle body in a year and a half from the dealer.

[@samifiat2471]

my ford flex is doing this. I followed your vid to the tee. including the relearn process and still wrench. any ideas? brand new throttle body too!!

[@bigmittengaming1590]

I'm having issues with my 09 Escape. Going from red light it will barely go staying at 10mph then it will jerk and go up to 5000 RPM and accelerate real quick. It will also also stall when turning on residential streets at times.

[@FireMedic541]

What could cause a tick from the intake boot next to the throttle body. It’s not oil pressure or valve related. Sounds and feels like a sensor. 2012 ford escape 4cyl non-hybrid

[@jessicagrooms581]

Could this cause the intake air temperature sensor to be showing on coder with mass air flow sensor? We changed MAF sensor already still showing MAF sensor and Intake Air Temp Sensor but having all symptoms of throttle body.

[@hightechrednech]

Is the procedure more or less the same for an 09 Mariner Hybrid? I googled that and your video was the first to pop up

[@FordTechMakuloco]

+hightechrednech yes

[@RyanFGNM]

This plug for the throttle body looks very similar to the plug for my 2011 f150 5.0. I couldn't figure out how to unplug so I left it plugged in and moved the throttle body off to the side. I had to do this to take off the Y connector hose I was replacing hose seals for the quick release hoses. My question is this the same way you would remove nthe plug for my model year?

[@moralesruben974]

what problem does the vehicle have to change that article greetings from mexico

[@davidnaisuler5743]

First driving lesson with my son, switch sides, hose blew out while he was driving in the parking lot, his comment was “it’s funny how they make these cars so much easier to go than to stop“, when we switched back I was like holy moly WTF lol! Front left, brake fluid everywhere, still had consistent pedal so babied it home, stopped at the car parts store on the way and picked up a set of all four hoses, replaced them the literal next day. The other three looks just as bad as the one that blew. Easy brake job btw.

[@apgkpsdgksd]

which are the faults to change the part??

[@specfever2]

The part you list indicates it will work on both the 2.5L 4-cyl and the 3.0 six. Does that make sense? Advance Auto sells a Dorman throttle body for about $350. Yours seems to be an OEM Ford part for less than $60!

[@specfever2]

I bought it from Ford for 60.

[@cameronbridges6729]

I have an 07 f150. 4.2L with an electronic throttle body and am assuming the process is the same for the relearning process. Can you please confirm this for me and tell me what equipment if any that I need to do the relearn. In addition, I ohm'd the pins for the pot in mine for the feedback and did a sweep check on it and it went open several times during, this is what is making me think the TPS in the electronic throttle body is the problem

[@DontBIink182]

How do I reset the memory on the PCM before I "learn" by idling? 2010 Ford Escape XLT 2.5 4cyl

[@buckyswider1]

He has a video for that! kzbin.info/www/bejne/noukpKKnotabmq8

[@AC-gu7rg]

Do I need to let my 2011 mazda tribute 2.5 liter engine run and sit idle fir an hour after replacing the throttle body ?

[@TheFareastbeast78]

Replaced throttle body and mass air flow sensor and air filter having same issue ( losing power and kicking hard into gear ) any other suggestions ????

[@williammccann8815]

I have a 2011 Ford Escape 4 cylinder. I changed out the throttle body and spark plugs also did the pcm clearing. Has 96k miles and needed it. My problem is that I have a slight gas fumes coming from my vent. What's the issue?

[@wgraves72]

Did everything but it still won’t start only codes im getting is the one for this issue po122 I replaced both throttle body and mass sensor. I can’t get it to start still. Should I like at something else. Was driving fine until it stalled on me at the mall had the battery checked and it was bad so I replaced it now I’m at this point 🤦🏽‍♂️

[@LeeAdler12]

my wrench light comes on which brought me to this. i went to AutoZone and quite frankly they didn't seem to know anything. they suggested I buy a cleaner and try that. do you think that will stop the light from coming on and prevent my escape from biting the big one??

[@carlosalbertolopez1300]

I have a 2008 escape hybrid, would it be any different from this procedure, father than get the correcto part?

[@iridium3rk]

Hi could the Throttle body cause vehicule stalling in highway? And 10 seconds before vehicle stalls speed indicator go down to 0 speed while in highway? For speed indicator i think the instrument cluster is fine because when i start the car all needles do the right left swipe and the speed indicator problem happened 2 days ago before stalling while in highway too with needle go to 0 and odometer stop counting milage. Thank you !

[@edcosta8417]

I had the throttle body replaced on my 20012 Escape 2 years ago at the dealership. It's starting to stall again. Is it common for the throttle body to fail repeatedly? Same symptoms same wrench light on.

[@joshlara1582]

Had trans leak in the condenser and jumping rpm when idle would drop escape would surge fixed the condenser first so when I relearned the throttle body I could let it learn on load also drove fine for a week today idle jumped stalled out on me twice got it to parts store for a obd reading shoot 02sensor code bank 1 and 2 both sides sensor one never had a irregular idle and stall for a 02 sensor gonna check for a vacuum and exhaust leak any advise

[@EliasVoorhees]

Hi. I have a 2009 escape with hybrid 4. I’m getting a knocking sound only under hard acceleration or going uphill. Very smooth otherwise. No check engine light, only the wrench light intermittently. Any ideas??? Thanks

[@dan86B]

Does the 2010 3.0 have an idle air control valve?

[@adnaniddo2494]

my 2009 ford escape shuts of while I'm at a red light could this be the throttle body

[@FordTechMakuloco]

If non hybrid yes that or the canister purge valve.

[@rickyhiebert2766]

@@FordTechMakuloco Ok thank you I will get them checked. It does it only when you go hard off the line

[@1fnjo790]

@@FordTechMakuloco, I Got a 2010 escape3.0 w 145K runs fine but that just shuts off intermittently at idle.(No check engine light, wrench symbol or PCM codes).The Fuel trims look fine and see nothing out of range . I cleaned the MAF sensor and throttle body earlier and cleared keep alive memory to relearn but did not resolve. Had guy order a Ford Throttle body and I just put on the new Ford Throttle body on it, disconnected inspected the PCM connectors and no green death. Reset keep alive memory to relearn new throttle body , now the stall is happening more often than ever. I kinda doubt the canister purge valve is causing this issue though. Weird that I'm not seeing any Fuel Rail Pressure pid on my Maxi Sys ELIte and had some goofey cylinder acceleration variance rather than misfire counts.

[@djungo1]

Hi.i have 2008 Ford Escape hybrid and I replaced TB but I am getting very poor mpg. Do I have to adapt TB like this or I have to take car to a dealer for adaption,thanks

[@chrisrae4401]

Awesome buddy thanks big help ....I will replace mine ...grateful 😊

[@lgarzza1]

Good video good explanation 👍 thank you

[@christopherdemastus2953]

How do you reset/relearn a new throttle body on a hybrid? The engine will shut off in a minute as part of the hybrid electric motor cycle.

[@ted3400]

I have a 2012 Ford Escape 2.5L with 119k miles. There is a bad vibration when I sit at stop light in drive. Gets a little worse when air conditioning is on. But if I'm at the stop light and shift to neutral or park then there is no vibration. It seems the more load at idle at stop light then the worse the vibration. I have changed the two motor mounts. Still vibrates. I have changed spark plugs. Still vibrates. It has something to do with the idle (electronic throttle body?) because if I barely increase the RPM at stop light in drive then the vibration starts to go away. Any suggestions would be helpful as to what is the next part I should change.

[@brianbuell5569]

Your videos are always the first I look for when I have to fix something on my Escape or Focus (which is thankfully rare!) My 2012 Escape with the 3.0L and 80K miles will sometimes crank a while before the engine fires up. Battery is only about a year old, and it sounds really "snappy" when it cranks, so I don't think it's the starter or battery. I also noticed a little more vibrations in the cabin than it used to have, which I thought was a motor mount issue originally. Think this could be an issue with the throttle body? No check engine light is showing up. Thanks!

[@sasquatchnunu506]

I'm having same issue now with my 2010 escape everything you listed cranking delay, to rattling while driving. I was told engine mount, did you ever look into these things?

[@spongebue]

​@@sasquatchnunu506 on the long crank, it turns out there was a TSB about it. Basically it was a side effect to a recall repair in the throttle body. I brought it back to a dealer (different one from the recall repair) and they were pretty familiar with the problem. As for the rattle, I really don't remember what caused that or if it was even fixed. I think I just got used to it. Sadly my Escape was totalled 3 years ago in a bad, bone-headed accident but Captain Jack performed beautifully when we needed him to most.

[@Imblessedustress]

Love this video thank you keep it going bro!! 🎉

[@jonnyf3452]

Good video man. Very informative. Thanks.

[@MrJeffbbc]

Looking at buying a 2009 Ford Escape. Checked the ford website with the VIN and the throttle body recall has not been fixed. (Field Service Action Number: 13N03) It has 154,000+ miles on it. Will the Ford dealer still fix this recall for free? Please, let me know if I have to pay for the fix, so I can use that to negotiate a discount off the Escape.

[@NobodyUR]

What's more likely the tps to fail or the body itself

[@shaylynnhoward2357]

I need help with advice on my 2010 focus

[@jamesparry151]

I have a 2008 3 Litre V6 Ford Escape. Would I be correct in thinking the parts haven't changed much for the 2009-2012? Ford have said that I'd have to replace the "Throttle Plate" also as I can't get the part individually, and thats $500. Can anyone shed some light on this?

[@gime8148]

I did this on my f150 and it was shaking like crazy! Should I have let it idle longer than a minute?? Iz this normal???

[@threadednarrative]

The link you have here for the part doesn't seem correct. It has a picture of a throttle body but says computer module, and the price is only $112? Do you have any updates on where to purchase? Thanks.

[@FordTechMakuloco]

+Kalei Meyer that is absolutely the correct part the title is wrong. I have even ordered this and it is indeed the latest ETB for these engines.

[@threadednarrative]

Thanks. So the part is only $111.00? Because when I call sherwoodparts and ask for a 2010 Ford Focus throttle body they say it's $430 something. They say they don't control how Amazon sells their products.

[@FordTechMakuloco]

This video is for the escape. The latest throttle body for your car is Here- amzn.to/2a5yACd

[@funnytv2887]

My 2009 ford escape XLT shifts fine one day next day wont shift right could this be the throttle body?