Foredom presents Wayne Werner's Handpiece Choices-Segment 3

  Рет қаралды 114,187

Foredom Electric Co.

Foredom Electric Co.

Күн бұрын

Пікірлер: 37
@shanesplanetshane3795
@shanesplanetshane3795 2 жыл бұрын
Thank you SO much for keeping American quality alive.
@Rumifor2000s
@Rumifor2000s 3 жыл бұрын
Very Helpful!!! Thank you 🙏🏼🙏🏼
@RioTechs
@RioTechs 10 жыл бұрын
Great video Wayne, really great stuff here. Thanks for sharing. Mark N Tech
@geraldmartin8195
@geraldmartin8195 5 жыл бұрын
Thank you, Wayne. It's really good to watch a demo made by someone who really knows their product.
@trkx444
@trkx444 Жыл бұрын
Thanks for this helpful video. I am wondering can the DREMEL 225 flex shaft be fitted on any of the FOREDOM SR series? Does it work?
@brucetripp3331
@brucetripp3331 2 жыл бұрын
Hi I bought a foredom just lately and turn it on and the hand piece wouldn’t spin, after ringing the supplier I took the end piece near the motor and found the grub screw was tightened and the piece in between wasn’t connected to the motor. I can’t believe each piece is tested. As being new I was hesitant to pull it apart due being new and under warranty. I ended up doing it but it cost me 45 minutes of wasted time.
@johnmay3266
@johnmay3266 4 жыл бұрын
Do Foredom handpieces only fir Foredom flex shafts? I have, what can only be described as, a beginner look-a-like and I would really like to purchase a more comfortable handpiece and slowly add Foredom pieces until I can afford your system. I'm retired and on a fixed income so I can only spend small amounts at a time. My current handpiece looks exactly like yours with the three-jaw chuck.
@gaduches
@gaduches 11 жыл бұрын
Great info, Well done. I'm getting my 2220 kit today to work on my Koroit opals. Wish me luck.:o)
@mkivy
@mkivy 5 жыл бұрын
Good day, i was lucky enough to find a whole set with this motor in my late mothers. Lapidary set. What do i need to do before i even start to work with my 🧰 tools? I found the motor, tubing,connector and several tools. So before i turn it on what should i do with it?i have just started soldering my jump rings and cleaning all my silver jewelry...now I will shut-up, and watch...any suggestions will be helpful...good day sir.
@ForedomElectricCo
@ForedomElectricCo 5 жыл бұрын
You are lucky to find one! Our KZbin series on Foredom Basics is pretty old, but the instructions tell you all about maintenance. The motor might need cleaning. The shaft might need lubrication or replacement. Our website has lots of supplies even for older discontinued motors. We have live chat on our website www.foredom.net and our customer service team is helpful and knowledgeable. They are here M-F 8:30 - 5 pm. Customer service does not review all the youtube questions. They will have questions for you like: what model is it and so forth.
@rickcox3806
@rickcox3806 2 жыл бұрын
OK can you tell me a number or a name or a site to go to to be able to get a complete set of the Fordham wood carving set I’m talking everything that way you don’t have to keep ordering pieces by pieces
@kaibilbalam7151
@kaibilbalam7151 4 жыл бұрын
So i just purchased a kit foredom cost me 500$ plus, so today i was using a new burr, n did what i had to do, when i was done i try to change the bit n i couldn’t get it out, so bad the lil, key that goes in the hole of the handpiece bent now the lil key is stuck in the hole n the burr in it🤦🏾🤦🏾🤦🏾🤦🏾🤦🏾🤦🏾soooo frustrated cause its soo expensive can you or someone help or have any tips “ how to fix it or what to do” 🙏🏾😓thank you!!!
@ForedomElectricCo
@ForedomElectricCo 4 жыл бұрын
Our sales manager is working on this problem. He got your message. This is very unusual. We never saw this before!
@kaibilbalam7151
@kaibilbalam7151 4 жыл бұрын
Foredom Electric Co. thank you for your quick response, i put the burr or tip in the hand piece n used it for about a min. N then i stop to change the burr, n from there on i just couldnt “unscrewed “ it with the key that comes with it, very strange, cause i used the handpiece before n all was fine....another thing I noticed is that the hand piece gets really warm almost hot after using it for about 5 mins. I saw the tip of the shaft has extra grease.,..... it is very frustrating cause this set wasnot cheap at all., so i didn’t expect this problems so soon on a band new equipment!? Anyways thank you i really hope you guys can help me!!!!!! 🙏🏾 thank you again!!!!!
@Applepie409
@Applepie409 3 жыл бұрын
Slimmer hand piece better for me having a small hand and for finer setting work. Why so many hand pieces especially the chunky ones. Need to try before you buy. What time you save in the quick release you could lose finding the right hand piece unless you just have a couple.
@VitaliyKhomich
@VitaliyKhomich 3 жыл бұрын
Do you guys have a 90゚hand peace? I am looking for one to port 2 stroke cylinders
@ForedomElectricCo
@ForedomElectricCo 3 жыл бұрын
We no longer sell that. You might be able to find one used, though.
@nilaray
@nilaray 4 жыл бұрын
Great info..QUESTION..you talked about all the handpieces mostly in reference to the SR....are there any that ONLY work on the TX or that WONT WORK on the TX? I need to place an order for a 2" angle grinder....trying to figure out which 30 handpiece to get for my TX as well as which handpieces work best for it besides the 44T HELP anyone?
@ForedomElectricCo
@ForedomElectricCo 4 жыл бұрын
Just looked you up on Facebook. You can use any of those handpieces in the video on a TX - I could see your maintenance photos. You would need a H.30 to use the Angle Grinder. Thanks for contacting us. Our work hours have been a bit messed up lately (with all the extra cleaning etc) but we are staying careful and well. Take care!
@GulsahOlmez
@GulsahOlmez 8 жыл бұрын
hello, how come there is no video available for your H.9D Handpiece, PowerGraver and the motor - hand-controlled and the foot-controlled units? I looked everywhere and cannot find any video, information regarding this tool and how it works, tutorials on how to cut channels, stone setting, bead work etc. It is making it hard for me to blindly purchase this tool that I don't know how it works when your competitors are constantly releasing videos. I contacted your company twice but haven't received any information on this tool. Can you help please? thank you
@ottazoubek3279
@ottazoubek3279 3 жыл бұрын
Hello Otta Czech Republic, I have a question, the ALI Express have FOREDOM outboard engines for $ 40-50, is it original from the FOREDOM company ???
@brianlegrand826
@brianlegrand826 11 жыл бұрын
I am Looking at the H.50C Hand-piece.... Every time I search this site for you segment I do not hear anything about it. Could you give a good opinion on this model? I would like to use it for Rock carving and wood carving... I am not sure the collet usability it has?
@safaririchard1353
@safaririchard1353 7 жыл бұрын
I just found out this top great tools. i would've to by the H.15D hammer Duplex spring, can i get it on amazon?
@olegpetelevitch4443
@olegpetelevitch4443 2 жыл бұрын
I have 5 !
@nuciide
@nuciide 11 жыл бұрын
I've had my 30 handpiece for 3 years and I have noticed that it no longer runs true. Is it possible to have the handpiece repaired? Or is it just more economical to purchase another 30 handpiece? I know it isn't a problem with the coil - it seems to be more an issue with the axis inside the handpiece or the positioning of the three claws. Any suggestions?
@zia786rajana
@zia786rajana 5 жыл бұрын
Hello sir I am a gold smith. Plz tell me about the necessary things and where can found them in Pakistan.
@markiestephens8741
@markiestephens8741 7 жыл бұрын
Is the H.52 no longer available? I can't find it on Rio or on the Foredom site.
@lindabanning140
@lindabanning140 6 жыл бұрын
I don't think so. I can't find anyone who sells it. I think it had problems and it was discontinued.
@ForedomElectricCo
@ForedomElectricCo 5 жыл бұрын
it was discontinued.
@lindabanning140
@lindabanning140 5 жыл бұрын
@@ForedomElectricCo Maybe you need to update the video again. This guy is really putting the hard sell on a product you dropped - Not good marketing.
@ForedomElectricCo
@ForedomElectricCo 5 жыл бұрын
@@lindabanning140 Right, we will discuss. The majority of products in the video are still being manufactured. The H.52 was popular, but we did not manufacture that one ourselves and had no control over it being discontinued. Thank you for your feedback on our marketing. Happy New Year!
@SOVEREIGNDesigns
@SOVEREIGNDesigns 7 жыл бұрын
beeen looking for right angle hand pieces for porting small 47mm bores ?
@pijnto
@pijnto 10 жыл бұрын
the good thing about consumer laws in Australia re the duplex handpiece Foredom have to warrent by law
@lindaravenwind8880
@lindaravenwind8880 9 ай бұрын
11:10
@davidhaney1394
@davidhaney1394 5 жыл бұрын
if you save me a couple of mins a day , by the end of the week you saved me 14 mins ........
Cheap Foredom Alternatives. Testing 3 Vevor Flex Shaft Motors.
12:22
All About Flex Shafts / Pendant Motors and Handpieces
11:49
Andrew Berry
Рет қаралды 168 М.
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН
I'VE MADE A CUTE FLYING LOLLIPOP FOR MY KID #SHORTS
0:48
A Plus School
Рет қаралды 20 МЛН
«Жат бауыр» телехикаясы І 30 - бөлім | Соңғы бөлім
52:59
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 340 М.
What WOOD You Make? DIY Wood challenge Collab!
30:56
DIY DONNA
Рет қаралды 57
When to Buy and How to Mark Your Tools
7:56
Adam Savage’s Tested
Рет қаралды 230 М.
Foredom presents Wayne Werner's Motor Overview- Segment 1
6:04
Foredom Electric Co.
Рет қаралды 168 М.
Woodcarving with the Foredom SR - Honest Review & Demonstration
13:49
Cornelius Creations
Рет қаралды 42 М.
Flexshaft vs Micromotor
8:32
Foredom Electric Co.
Рет қаралды 27 М.
You Won’t Believe What We Found! Inside the 900,000-Mile Engine
20:37
Dave's Auto Center
Рет қаралды 724 М.
Foredom Handpiece Choices
10:54
Romanoff Store
Рет қаралды 22 М.
Maintaining the Foredom Flexshaft with Melissa Muir
6:44
Foredom Electric Co.
Рет қаралды 31 М.
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН