Foredom presents Wayne Werner's Motor Overview- Segment 1

[@desertdiva9771]

I have a Foredom that I bought in the eighties to do acrylic nails. It came only with a foot pedal to control the speed and I still love it. I have no idea where I bought it but it had to be a nail supplier. I hope that it never breaks down!

[@mkivy]

Thank u...I’m a novice jewelry maker and have bought 3 Dremels and none could do the job I needed done, so now I’ve learned I needed something more powerful...

[@aot9339]

2020 and I am really thankful finding this video.

[@tanaeatlee7989]

This video was extremely helpful to me in deciding what I need for my jewelers bench. Thank you!

[@AndThenShlack]

Thank you so much!

[@Dharlanna]

I would like to request a video on using the hammer handpiece and the various attachments that you can buy to go with it. This would be an invaluable tool I think but honestly I would love to see how the other bits can be used as well. I just purchased my handpiece today and am looking forward to it, but need more information please!

[@briarbodie8339]

i dont mean to be so offtopic but does any of you know of a way to log back into an Instagram account?? I stupidly forgot my login password. I would appreciate any tricks you can offer me.

[@azariahivan3939]

@Briar Bodie Instablaster :)

[@briarbodie8339]

@Azariah Ivan i really appreciate your reply. I got to the site on google and Im trying it out now. I see it takes a while so I will get back to you later with my results.

[@briarbodie8339]

@Azariah Ivan it did the trick and I now got access to my account again. I am so happy:D Thank you so much you saved my ass !

[@azariahivan3939]

@Briar Bodie you are welcome :)

[@catherine5064]

Can you use the hammer hand-piece with the SR on a lower speed to avoid burning the hand-piece out?

[@ForedomElectricCo]

yes

[@felixf5211]

I had a SR and now use a TX; I'm not a jeweler. The TX is used daily as a die grinder of sorts. The machine is essentially unstoppable. Handles 1/4" shanks with ease. As far as professional tools go, its cost is pretty reasonable, IMO. If you're buying a new flexshaft and debating whether a few more bucks for a metal pedal is worth it, let me assure you that it is - more control, noticeably easier to maintain a desired speed. I have a plastic pedal, too, on another machine. Wish I would have bought the metal one to begin with.

[@szymonpollak8096]

Hi! Which model of Foredom will be the best for gemstone carving? greetings!

[@LaoZi2023]

sounds to me like the LX would be the one that you want, wouldn't you? But then again, if the stones are large, maybe the TX?

[@szymonpollak8096]

@@LaoZi2023 probably TX will be better. I carve in jade, sometimes I need more than 5k RPM.

[@swwsociety1877]

Thank you, I now understand a lot more - which will help me choose what best to buy.

[@guidelineuk]

Can you put a speed control as well as the foot control???. And if not why not😎

[@Demon_Pilot_GT]

Id love a fordome. Maybe aome day

[@dianaalexander3506]

Hello I have a more than 20 yr old Foredam CC Series with 8 amps. It has served me well for a long time. I am interested in possibly using hammer hand piece to have flexibility in setting etc. What second Foredom would you recommend I purchase next?

[@ForedomElectricCo]

You can use an H.15 Hammer Handpiece www.foredom.net/product/h-15-handpiece-hammer/ with a 20 year old Foredom that is still in good working condition - if you run the motor at lower speeds (0-5,000 rpm). For a new motor we usually recommend an M.SR flex shaft motor which is 1/6 HP, runs in forward and reverse at speeds up to 18,000 RPM, and offers all of the power and speed needed to accomplish most every job. M.LX motor has a maximum speed of 5,000 rpm and is designed for drilling, wax modeling, and other slow speed applications - but for not when you need higher speeds. Another way to make sure your motor is running slowly is a dial control. C.EM for an SR motor, and C.EMX for an LX motor. We have dial speed controls for older - even discontinued motors also. www.foredom.net/product-category/flex-shaft-tools/flex-shaft-speed-controls/ We have live chat Monday through Friday 8:00 am - 5:00 pm (ET) on our website. Customer service can answer any questions you have.

[@johnlowry1055]

I use the Foredom SR flex shaft motor, and like the reversible motor, as am left handed, a real help. Also, have one about 30 years old.

[@sinistershenanigans965]

Hi Wayne Robbie from Liverpool England. Are the TX @ LK good for wood carving. And is there any significance in the Colour in the labels on the motors My SR motor is red. Cheers.

[@ClevesBackyardWoodworking]

sr or tx for wood carving? I use dremel 4300 and if I can save some money up maybe looking at one of those.

[@ForedomElectricCo]

Our best advice is to go with a model within the Series SR. Series SR flex shaft motors are 1/6 HP, run in forward and reverse at speeds up to 18,000 RPM, and offer all of the power and speed needed to accomplish most every job. Keep in mind that our motors are rated at continuous duty or maximum efficiency and NOT maximum output. If we adopted the max output rating used by other manufacturers, it would qualify as 1/5 or 1/4HP.

[@morrissanz5589]

Me interesa un motor de estos donde lo encuentro.

[@bixewoschtfighta]

I sometimes see SR Motors with red labels, where is the difference to a blue label SR Motor? Thank you

[@ForedomElectricCo]

If it is a real Foredom, the red label is 230 volt which is the type of electricity more commonly used outside the US. There are also knock off Foredoms that have red labels that could be any voltage. We do not honor warranty repairs for fake Foredoms and you can't count on our maintenance and replacement parts working for them. Usually information about electrical specs is on the back label.

[@fingernailfreddy7335]

LX looked to have a lot of runout considering the cost.

[@felixf5211]

FWIW, I've indicated two #30 handpieces - a bit over 2 thou runout. I did see the same thing as you and suspect the burr's shaft wasn't terribly straight.

[@kaibilbalam7151]

I am a wood carver, which one you recomend!? Thank you!!!

[@ForedomElectricCo]

H.SR Motor, H.44T handpiece, C.FCT Foot Speed Control. Kit K.5240 has all 3 plus rotary accessories and other useful items. www.foredom.net/product/k-5240-woodcarving-kit/

[@paulmacneil2619]

@@ForedomElectricCo I am getting one for lapidary work bit I'm not sure what kit if any is available for that purpose. Any thoughts would be appreciated.

[@yamahonkawazuki]

ive got 2 of these. one for my jewelry and watch work, and one as a spare. cept I cant find a #20 chuck key. know where I can find one? that particular foredom is a tad older but runs flawlessly. congrats on making a flawless tool for tradesmen of all types. Aaron

[@yamahonkawazuki]

ive got both the tx and the sr. and one other one in a box ive ye to use. I to use the 1/3 on jewelry with very minute touches to the foot control. been able to polish quite easily without issues. quite nice pieces I must admit. and yes the handpieces alone are NOT cheap. I wont abuse them to destruction.

[@krisdavis602]

Awesome very helpful thank you I was going to get an SR but I'm a stone carver so TX it is 👍

[@richardvouriot6766]

I wish this tool wasn't so expensive I'd love to get one

[@albertoromero214]

United States or, China made motors and components ?. Thank you

[@jubaamazigh6863]

Bonjour monsieur, je suis artiste sculpteur sur bois, et je suis à la recherche d'un d'un appareil FOREDOM professionnel pour le bois, à votre avis le quelle de c'est appariel pour sculpté le bois ?.

[@ForedomElectricCo]

Nous avons beaucoup d'outils pour la sculpture sur bois. Merci pour ton intérêt. www.foredom.net/product-category/flex-shaft-tools/flex-shaft-kits-sets/woodcarving-kits/

[@StephenJonesDXCIRCUITS]

Where can you buy these motors and shafts. Thanks !

[@sunshinelady53]

Stephen Jones if you live in the US Rio Grande has them

[@StephenJonesDXCIRCUITS]

Thanks Loma Rothmund

[@aliv1908]

Could these be used to chase cast iron sculpture? With carbide burrs?

Hello, I do not know how to speak English, I need a handpiece for my motor foredom is for the old ones over 20 years with me

[@matt1343able]

you can find used or new one on eBay.or search( Riogrande)they sale jewelry supply(tools)

hola, no se hablar ingles, necesito una pieza de mano para mi motor foredom es de los viejos mas de 20 años tiene conmigo

[@dawnbickel3086]

yes I like to find out where I can get a flexible shaft cuz mine broke and I've been trying to look on KZbin for a Foredom S Series flexible shaft I need a new one and is there anyway that you can send me a phone number or an address or something that I can get a new shaft I would really appreciate it my name Steve mentusky thank you very much

[@felixf5211]

Foredom.net

[@jamalshikder293]

sel possible Bangladesh

Answer me when you can, I thank you

[@bayronlopezvaldez5395]

mucha platica y nada de accion

[@100gvolpe]

mi piace ma per favore un commento in lingua ITALIANA GRAZIE.