Рет қаралды 118,729
Video on how to restore a wrench. Here I am restoring an old rusty German wrench. In this restoration I removed rust, sanded, buffed, and applied paint.
▬ What did I do ?! ▬▬▬▬▬▬▬▬▬▬▬▬
In this video, I put the wrench in a bath with rust remover. Next, I sand the surface to create optimal conditions for the primer. Before priming, I mask off all areas that shouldn't get any color. The next step is that I apply the primer and, once dry, paint it with hammer blow paint and a brush. After removing the tape, I polish the mouth of the wrench to a shine. I top off the restoration by tracing the numbers and characters with white paint and a toothpick.
▬ Good to know ▬▬▬▬▬▬▬▬▬▬▬▬
I've always felt that old rusty wrench. That's why I can't say exactly where I got it from. Since it is already so badly worn, you can also see the mark of the company that made it. That's why I can't say anything about that either. In principle, this restoration was just a test. I have to say it wasn't that easy, you had to see if the picture was flickering (due to the exposure), the neighbor is quiet, no music is nearby, and so on in order to achieve a wonderful result. Because it was my very first restoration, I am very satisfied with the result! You too?
I used the following tools: cordless screwdriver, wire brush, tape, knife, rust remover, primer, top coat, orbital sander, file, toothpick
It took me about 9 hours to restore, without the paint drying time.
▬ Chapter ▬▬▬▬▬▬▬▬▬▬▬▬
0:00 Look at the old wrench
0:35 Remove coarse dirt from the wire brush
1:10 Place the wrench in rust remover
2:28 Work the mouth with sandpaper
4:43 Polish the mouth of the wrench to a shine
5:44 Prepare for the coloring
6:30 spray on primer
8:50 Color in with a hammer blow
12:34 Polish the surfaces again
12:58 Copy characters and numbers with white paint and a toothpick
14:46 Look at the completely restored wrench
▬ Did you like it? ▬▬▬▬▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!