Fork and gemstone rings. Jewelry from silverware. Flatwearable Artisan Jewelry

[@jillfugate2827]

Newbie here and your presentation is wonderful!

[@suewilson3812]

I thank you for an amazing tutorial, wow, so informative!

[@cmjudco]

Thank you Suzanne!! Awesome video! Beautiful rings! Great to hear your voice again! 🥰

[@caroljohnson3559]

Thank you for using the sterling tines. I was flustered after finely dipping into the sterling stash and having left over parts. It like leaving money on the table .

[@FlatwearableArtisanJewelry]

Glad I could help!

[@pharmycat10]

Fabulous video. Easy to follow along, and I love that you didn't remove any of the video so we could see how to rectify any issues along the way. Thank you!

[@FlatwearableArtisanJewelry]

I felt it was a valuable teaching exercise. I am not perfect and this shows that along with how to take an error and make it work.

[@kimhull5496]

Thank you for another GREAT teaching video. We all appreciate your willingness to share your expertise. I love that you kept in all of the extra work you had to do - good to know that even with all of your expertise that sometimes it doesn't work out like you intended. That gives us newbies hope :)

[@FlatwearableArtisanJewelry]

You are so welcome!

[@maggiebannenberkowitz9254]

Love these!!!

[@ArticAkita2830]

Very pretty set of silver fork prong rings!!

[@paulabelongie7262]

Thank You Suzanne I'm learning so much by following your videos.

[@FlatwearableArtisanJewelry]

Wonderful!

[@Luis-dr2io]

Caramba!!! Usted es muy artista, lindos trabajos, ha viajado bien!!!. Gracias por compartir un abrazo desde Lima Perú!!!

[@heidilv34]

Thank you Suzanne. These are beautiful! Your tutorial is so clear and easy to follow. I love that you kept in the part about bevelling the tines.

[@FlatwearableArtisanJewelry]

You are so welcome!

[@teresaarledge7193]

Another great teaching video. The rings are gorgeous. Thank you for leaving in the extra work part. That was very helpful to me. Somehow I also get a bevel. Thank you for sharing all your knowledge and time ❤️

[@FlatwearableArtisanJewelry]

Glad it was helpful!

[@darlenechaney6989]

Simply Beautiful 🤗

[@tjones5372]

Another gorgeous piece! 😊

[@janholland8667]

Beautiful!

[@FlatwearableArtisanJewelry]

Thank you!

[@jazzyrose3257]

Thanks for sharing great work

[@FlatwearableArtisanJewelry]

Thanks for watching

[@Michelle-rd9oe]

Nice video. Very informative 👍 😀 I would like to figure out how how you cut the forks. And I was wondering if they are plated silver or thoroughly sterling. How to figure it out...the stamp marks?

[@FlatwearableArtisanJewelry]

Jewelers saw. These are all sterling. Most sterling is marked on the back as "STERLING".

[@jirup]

Great rings! If you restrict the flux to the area you want filled, you'll limit the solder spread. Or you can paint the outer edge of the target area with ochre to achieve same.

[@donnaguidry9246]

Do you sell them they are Beautiful just AWSOME.😀😇

[@chandyscreations4211]

Can you do this with silver plated forks? Where do I find hard/med solder? Is the solder sterling silver?

[@FlatwearableArtisanJewelry]

You will have less than satisfactory results. The amount of filing, sanding, multiple levels of soldering, etc. are all going to damage the plating. You could remove the plating and re-plate after but that all increase your time and cost. We carry pre-cut solder chips in hard, med, easy, and x-easy in a convenient flip-top box on our website. We also carry the same solders in wire form. They are meant for use with sterling silver. www.flatwearable.net/home/soldering-station/

[@dwgmisty]

Great video thank you Question why did you not use your vertical sander instead of manual file?

[@FlatwearableArtisanJewelry]

Not everyone has power tools so I'm trying to show how to do many tasks with simple hand tools.

[@wallishome]

Where did u get the pre made settings from I would love a web site and ty for sharing this I am just getting started I'm a newbie I have not made my 1st one yet...

[@FlatwearableArtisanJewelry]

www.flatwearable.com

[@caroljohnson3559]

How difficult is using the snap settings on emerald or square/princess shapes?

[@FlatwearableArtisanJewelry]

All of the snap settings I have used were very easy.

[@eleanorjentas798]

These are gorgeous. Where d u buy white compound?

[@FlatwearableArtisanJewelry]

We carry it on our website. www.flatwearable.net/home/jewelers-buffing-polishing-compounds/

[@IWH777]

LOVE YOUR VIDEOS I AM BENG WATCHING THEM ALL RIGHT NOW AN THIS IS NUMBER 31.... WOW LOADS OF INFO..... FEELS LIKE IM IN A SILVERWARE JEWELRY 101 CLASS [[WOULD LOVE TO BE THERE FOR REAL THOUGH HOOT HOOT]] TY TY TY👍👍👍👍👍👍👍 QUESTION::: DO YOU NEED A BIG MACHINE TO BUFF THE JEWELRY OR CAN YOU USE A DRAMEL TOOL TO DO THAT AN GET THE SAME OUT COME??? ARE YOU SAYIN MIGHTY FLUX OR MUDDY FLUX??? THE REASON I ASK IS I AM HEARING IMPAIRED AN HAVE A HARD TIME WITH SOME OF THE WORDS PEOPLE SAY.. HAS NOTHING TO DO WITH ANYBODYS WAY OF SAYING THINGS ITS BECAUSE THERE ARE SOME THINGS I CAN NOT HEAR IN THE WORDS SO EVERYBODY IS DOIN FINE WHEN THE TALK ITS JUST MY HEARING THAT IS THE TROUBLE...

[@cathylowery8931]

How did you cut the forks off so smooth? What did you use?

[@FlatwearableArtisanJewelry]

Jeweler's saw

[@donaldwhynot5106]

How did you make the jig to bend the ring

[@FlatwearableArtisanJewelry]

It's the Flatwearable Silverware Bending Press. www.flatwearable.net

[@rethamcdonald8841]

Can you please tell me what the pickle pot consist of

[@FlatwearableArtisanJewelry]

Sparex at www.flatwearable.com