Wood's Expensive. Do THIS Instead.

[@WoodcraftBySuman]

Sooo many good tips! Best love letter to white oak, if I’ve ever seen one.

[@FortressFineWoodworks]

Thanks man! Maybe I'll try a UV hardwax oil sometime!

[@WoodworkingTop535]

I like your videos, thanks

[@timhonan4661]

I'm an old carpenter and watch a heap of KZbins on furniture building and finish carpentry. You have blown me away with your skill and attention to detail. Well done and keep up the great work.

[@FortressFineWoodworks]

Thanks a lot! I appreciate that very much from a fellow carpenter!

[@michaeldunkin8960]

Same. Beautiful work.

[@thenullco]

Totally agree. A cut above the rest and criminally undersubscribed.

[@ourtube4266]

The past tense of cost is cost when you’re using the word to say the price of something. Costed is the past tense of cost when you’re using the word to describe the act of estimating the price of something.

[@FortressFineWoodworks]

Thats very true! Thanks for the insight!

[@thedoorguycharlie]

I caught that too but his strengths are in other areas. I can't spell worth a s$#t but I can make a door closing sound like music.

[@genesmith555]

Omg, right? I lost 10 minutes of video wondering how such a well-spoken person would say this.

[@brianbrusnahan4518]

What hit me was that the tense was dramatically unnecessary as in "... the material cost..."

[@MadDog_Rules]

1. Simple past tense: Add -ed to the infinitive form of the verb for regular verbs. (cost or costed) 2. Past continuous tense: Form - was/were + verb + ing. (costing) 3. Past perfect tense: Form - had + past participle. (had cost or costed) 4. Past perfect continuous tense: From - had + been + verb + ing. (had been costing) You need to write the past tense of the word “cost”. The past tense of “cost” is cost or costed. The past participle of “cost” is cost or costed. The infinitive form of “cost” is cost. The present participle of “cost is costing. Can't believe i came to watch a video on woodworking and end up seeing the grammar police in these comments, who act as an authority over a word used in past tense and getting it wrong themselves. 🤣

[@terryatwater7961]

Hi! I'm a 63 year old woman who thoroughly enjoys watching you work. Both my dad and grandfather were craftsmen in the woodworking trade. They both would like you very much given your skill and attention to detail. Watching your videos brings back all those warm memories of my time in their shop with all the wood chips and sawdust . I enjoy watching you craft. Thank you.

[@FortressFineWoodworks]

I'm glad you enjoy it and it's an honor for me to remind you of your family. Thanks for watching!

[@andriy_moskalyk]

We do custom finish carpentry for almost 18 years. Always try to be the best. But the attention to details u have and dedication is just another level

[@FortressFineWoodworks]

That's a very humble compliment. I really appreciate that.

[@svonnestickley6311]

YES!!! I agree. This is what I want to strive to be especially since I am so OCD. haha But I love trying to make everything perfect. This was my first video that I've ever seen him so and it makes me want to see more.

[@JamesSullivan-ru4op]

Unbelievable how expensive wood is considering it grows on trees.

[@FortressFineWoodworks]

Very true. It does take a lot of work to get it from a tree into boards that are straight and dried properly though

[@inverness2323]

😂😂😂😂 Good one.

[@frankcornfield5915]

One of the best woodworking projects I have seen. Good to see how you deal with minor repairs during the build.

[@FortressFineWoodworks]

Wow that's great! I'm glad you enjoyed it, thanks for watching!

[@route13customs]

I haven’t had the pleasure of running into your channel until now. I would just like to say I really appreciate your commitment to quality of both your own and your potential customers standards. It’s always nice to see craftsman who take the time to create the best outcome possible in their own minds. Do we always have the best ideas or planning? Not always, but the process of figuring it out is the most rewarding part of our builds. Great work on this one. I’m sure it brought many more commissions because the attention to detail is definitely not overlooked!

[@FortressFineWoodworks]

Well I'm grateful you found us. Thanks for such a positive comment and look for our newest video coming out tomorrow!

[@Tom_Swift]

Quality work 👍 I always liked how slat walls looked then built a prototype for myself and quickly realized that having it behind the TV messed with my eyes, I would "blink" the stripes 😂 Basically, looking at the TV with the slats in the background leaves the impressions on your eyes, almost hypnotic. So I decided on not having a slat wall behind the TV, moving forward I would only put them in a transitional area or accent wall BEHIND the main eye view where you're not always looking at it.

[@FortressFineWoodworks]

Oh wow! That's really good to know. I wonder if any of my past clients have that issue. Thanks for watching!

[@bristolwoodburners81]

Yep I've got striped wallpaper that has the same effect on me! Can't look at it too long!

[@InspiredCraftsman]

I've used a shop vac to draw glue into cracks. Just purchased 500 board feet of rift red oak for cabinets throughout my home. Huge savings over white oak.

[@FortressFineWoodworks]

That's a great technique. And I totally agree, rift red oak looks really nice.

[@r7j7t7]

Great idea. I use syringes with an 18 gauge needle but the vacuum idea sounds faster. Thanks

[@jeroenbeltman515]

I really appreciate your honesty in your video. Most videos make woodwork look so flawless and easy...

[@FortressFineWoodworks]

Thank you for that. I appreciate you watching and commenting!

[@e.schwarz]

I watch a lot of woodworking videos for entertainment, but I genuinely learn useful solutions to problems I’m likely to encounter from your videos. Really great work. Here’s hoping the algorithm catches on.

[@FortressFineWoodworks]

Wow, that's very kind! Thank you for taking the time to comment because it will help let the algorithm know!

[@Curtis3366]

Fantastic video in terms of showing every detail in such a short period of time, showing exactly all of the steps in an instructional way, that doesn't devolve down into a basic "how-to" video. A perfect instructional video utilizing more of a "show-don't-tell-method", that even includes working through various mistakes that inevitably happen along the way. I picked up on the fact that you had to make the center rail several times to get the perfect fit, and that makes me feel better, because I often have to make things two or three times before I get them just right, especially when I'm doing things for the first time, and I don't think that a lot of people realize that that's just part of the process, specially when learning, or building something new for the first time. Great job on the build and the content. 👍🙏😎

[@FortressFineWoodworks]

Thanks for the kind words! Glad you caught some of those things

[@terrywawro2951]

Who would have thought a wood stripped wall would involve so much detail. Well researched and well done.

[@FortressFineWoodworks]

It surprises me every time I do an accent wall

[@thomasweber1397]

I know I’ll be watching this video over and over again when I’m working on my projects. You’ve packed so much information in this video that for me as a beginner in woodworking it’s impossible to absorb it all at once. The final product looks fabulous. “Great job” would be an understatement 👏👏👏

[@FortressFineWoodworks]

Thanks a million! I get it, it can be hard to absorb every tip in one sitting. Watching the video multiple times also helps the channel. Thanks again!

[@STILLWILLPHOTO]

Some people criticize your expensive tools but they fail to see how down to earth you are evidenced by the Harbor Freight f clamps lol. You are a Real one

[@FortressFineWoodworks]

Thank you! I like harbor freight F clamps more than bessey. They have more grip on the handles.

[@lukecarter7906]

Man you absolutely crushed that install and made it look way easier than I know it was in reality 👏🏽👏🏽 Your finish is always a joy to see and I loved the door pulls 🫡

[@FortressFineWoodworks]

I appreciate that. The door pulls were more work than I was expecting

[@bethoughtprovoking]

Just one correction. A quality wood filler will not fall out. I’ve done restoration work and have found filler that’s been intact for at least 100 years. Also, an end grain patch will be far more noticeable than putty, which, when stained, is virtually indistinguishable from the rest of the wood. The trick is to use a water stain on your project first; water stain evens out the variations in wood colour and makes everything look better. Even if you’re after a light-oak look, use a light oak water stain to help even out the tonality differences. It’s amazing: you can even make sap wood look like heartwood.

[@FortressFineWoodworks]

I like using wood because it will change color over time just like the rest of the wood. I agree though, wood filler is useful

[@themydisplayname]

Wow, I know zero about woodworking. But I watched the entire video in amazement. What an incredible work you did! I love the attention to details and the finished products looks truly amazing!

[@bskelly]

You do some tremendous work. Love the attention to detail and the forethought in planning. Can’t believe you aren’t above 100K subs. Keep up the good work

[@FortressFineWoodworks]

Well thank you so much. By watching all of the way through, you help grow this channel!

[@tmbchwldt3508]

Amazing project! One detail: for tearout prevention on your track saw, try lowering the green rubber-ish foot in the front. This presses down on the top grain and should keep it from tearing. Admittedly, this might also catch a bit on the slats

[@FortressFineWoodworks]

Yeah I agree, I usually do that when I don't want tearout on the right side of the blade

[@Gooneroo]

I admire that you do your job so well that it becomes an art.

[@FortressFineWoodworks]

That is the most "on brand" comment I've ever had. I appreciate it because I do treat woodworking as an artform. Thanks so much!

[@jdawkins111]

the art of reaching around behind the blade of a running table saw and shoving a shim clumsily in the kerf. that's van gogh level shit right there.

[@SpringHaIo]

I gleaned quite a few new tips and tricks from this video. Particularly cutting larger pieces for easier gluing and just cutting them down afterwards. The chamfered front edge of the cabinets really lightens the design and the inset pulls don't detract from that either. I've been using ash lately because it's just a little more expensive than red oak, but has the color of white oak and bit tighter grain.

[@FortressFineWoodworks]

I'm glad you got some good value! Ash is actually a REALLY GOOD alternative too. Well done

[@lightspeedguru]

The finished project looked great! Glad that you took the time to show us the mistakes and how you fixed them as everyone makes mistakes. Also, I would have enjoyed learning more about the finished cost and how much you were able to charge for this in your area. I know that some folks are uncomfortable about sharing these sorts of details but it really helps.

[@FortressFineWoodworks]

Thank you. I actually did share that, although you might have glanced over it. This project in white oak would have been around $12,000 in Colorado. But with all of the budget savings, the client only paid $6,500.

[@lightspeedguru]

@@FortressFineWoodworks Ah... I wasn't sure if that was the 'cost' of materials or the 'price' the client paid. Thanks for clearing that up.

[@SeaFanStudio]

This project turned out beautifully! You did a great job at disguising the red oak to resemble white oak.

[@FortressFineWoodworks]

Thank you! I'm glad you liked it!

[@jamesmoore1532]

Your local/regional supplier should offer S3S and S4S services. I pay .11 cents bd ft for straight line and ran through a double sided planer. On red oak i pay $1.20 per lf for 1.5" x 13/16 S4S ran through a molder. They also deliver for $25.

[@FortressFineWoodworks]

Yeah that's a decent deal. It might be a little more challenging to get them straight on the panels though

[@jamesmoore1532]

@@FortressFineWoodworks with red oak most if not all would be straight. Hard maple you will end up with some hockey sticks.

[@kylieb4836]

Your work is exceptional and I learnt so many tips through this video !! If I can offer a tip for glue-up? The point where you were worried about glue squeeze out? Take a small amount of glue and paint in the direction from the tape towards the glue up area of wood - do this all along the taped area and allow this to dry. You can then continue with your glue up. The extra glue you allowed to dry provides a seal so no glue ends up on the face of the wood.

[@FortressFineWoodworks]

That's a great tip! Thank you!

[@damienscabinetmaking4243]

Watching from Sydney Australia. The attention to detail is up there amongst the highest on KZbin and social media. Appreciate the soothing narration too, without noisy music or product plugs. It's great seeing a budget-smart alternative with Red Oak. Here, in Aus it's fashionable to copy Americans but since we lack native oak forests and having to import the timber some projects I work on end up in several tens of thousands. It's senseless nowadays and timber merchants have been price gouging since the pandemic.

[@FortressFineWoodworks]

Thank you. You are definitely right, most corporations are price gouging still, it's sad

[@damienscabinetmaking4243]

​@@FortressFineWoodworks It seems our commercial wholesale timber prices for American timber imports are 3-5x your local retail prices. It's crippling ands it's criminal, but what choice do we have? Especially since shops here have been stockpiling at pandemic prices it's caused mass staff redundancies and they say half of builders have gone insolvent. I guess if local customers didn't follow fashion trends but were open-minded to lower cost local materials there would be a chance. Red Oak may be one way.

[@geraldstanley9692]

Looks amazing! The before and after on that room was incredible. Also really like the way the door trim looks - super sharp. Great work!

[@FortressFineWoodworks]

Thank you, I'm glad you like the trim, it was a fun little detail to add!

[@bobbray9666]

With all the equipment you have, you should add a power feeder. Makes ripping long boards a breeze. It will save your arms and possibly your fingers. It will also prevent saw blade nips when you stop ripping a board to reposition your grip. Best investment I've made when I built all of the millwork and cabinets for our new home build. You can also move it to your jointer. Just position it on the outfeed. I used mine as well on my router table. I have a 1/4 HP feeder but a 1/2 HP works better for long wide hardwoods. I bought and assembled a magnetic hold down from MagSwitch for my feeder, so you don't need to drill holes. This only works for cast iron table saws and jointers since the sheet steel of portable contractor saws is too this for the magnets to take hold and stay put.

[@FortressFineWoodworks]

That's great advice. I haven't gotten one since I figured it might take away from the video aspect

[@bobbray9666]

@@FortressFineWoodworks If you're not demonstrating proper table saw techniques, I don't think anyone cares to see a board being ripped more than once. You don't need to install a riving knife on your saw when using a feeder since kickback can't happen. The feeder, at worse, would stop feeding and then you can insert a wedge to get it feeding again. I'll use my feeder on any board more than 4' long. The magnets make it easy to slide the feeder into position and lock down. The Magswitch Power Feeder Mount is $819 now regular price but it provides over 1700# of break away force. I see a prototype listing there too for under $500 that has the same hold down power. I have no relationship with MagSwitch but their stuff is really useful. If you make a lot of stuff a power feeder is the best accessory investment. No feather boards, no riving knife or Clear Cut fence hugging wheels are needed. The safety aspect is huge, unless you throw your back out trying to lift a 100#+ feeder!

[@GunnyNinja]

I didn't come here to build a $6000 wall either.

[@FortressFineWoodworks]

Well good thing you can take these tips and build whatever your heart desires! Thanks!

[@selfbuilder8647]

Unlike others, you show making mistakes and how you fix them which is really useful. It's easy to know how things should go, harder to work out what to do when they go the way they so often do.

[@FortressFineWoodworks]

Very true, it's all part of the story

[@rjthomasindyusa]

I built furniture, built ins and features for clients for many years. It's a ton of work. I couldn't imagine recording a video at the same time. How much longer do you think you spend everyday to set up the camera to tell a a story?

[@FortressFineWoodworks]

That's a great question. It doubles my working time

[@mr_ceallaigh3311]

the finished look of the wall is similar to the way I've planned for a room in my house, so this was pretty informative

[@FortressFineWoodworks]

That's good! Thanks for watching!

[@jasonbissonnette2331]

So beautiful! And great repair, you would never know that you glued on that board. How you got those slats and gaps to line up just blows my mind. You are such a craftsman and as I have said before, your videos are amazing. Thank you for the content.

[@FortressFineWoodworks]

I can tell you really appreciate creators, and that means a lot to us. Thank you for watching and taking the honest time out of your day to comment! You always have amazing things to say and they make a difference!

[@danielberrett2179]

The whole thing coming together at the end on the wall is just too satisfying. I covet.

[@FortressFineWoodworks]

Thanks so much for watching!

[@GlenDomulevicz]

Cool project. Thanks for the tips, measuring in multiples and using water at glue up. I really enjoy the music you employ Thanks for sharing.

[@FortressFineWoodworks]

Thanks! I'm glad you got some juicy details!

[@T_Jonesy]

Wow, that is some beautiful work. I hope your customers appreciate what went into this build and install.

[@FortressFineWoodworks]

Thanks! These customers are among the best. They are also return customers!

[@T_Jonesy]

@@FortressFineWoodworks I can totally see why they're return customers. The quality of the work is just amazing. Cheers!

[@daanw6270]

This is how you make cheap wood look expensive: have 20k worth of woodworking equipment 😂

[@FortressFineWoodworks]

More like 120k in equipment. But it's the intention that counts

[@daanw6270]

@FortressFineWoodworks still amazing work btw 👌

[@Foster_The_Wild]

Spindle alone was probably over 20k

[@tomruth9487]

One of the best youtube woodworking projects ever. Beautiful work and perfect installation. I don't get why white oak is so trendy and red oak is lost in the shuffle.

[@FortressFineWoodworks]

Thank you very much! I agree, I was one of the people that hated red oak, but now I have a new respect for it

[@tomruth9487]

@@FortressFineWoodworks When I first started woodworking, everything was done in rotary red oak, yuck! I recently did a kitchen in rift sawn red oak and there's such a difference in the two cuts of oak.

[@octothorpian_nightmare]

Great commentary here, love the structure of the video too. So many are just a half hour of tool noise and a big reveal at the end. New sub!

[@FortressFineWoodworks]

Thanks for the sub! I appreciate you watching!

[@paulkemp4559]

Really good to see the problems/mistakes and the solutions, so many how to videos present perfect work all the time and that’s not reality in any business

[@FortressFineWoodworks]

Very true. Projects are always filled with problems and solutions. Thanks!

[@gary457]

I can't begin to tell you how satisfying this video was. I am a subscriber now. Amazing work and attention to detail. I would give you one tip... When putting silicone or adhesive on, put it in circles. It's a mirror install trick. It will create a suction when you push the panel to the wall

[@FortressFineWoodworks]

Awesome, thank you! I learned that circle trick years ago from a contractor. It works pretty well, but I never really noticed a difference in installation or adhesion other than the circles take more time.

[@InspireWoodcraft]

Man, this turned out so good! Attention to detail is everything and I’m happy to see someone else has it too! Literally the only thing I would have changed is having the cabinet sides line up with the slats, kind of like the door trim. But I’m a little ocd, soooo… 😂 Great work!

[@FortressFineWoodworks]

That would surely be next level!

[@TroyWarr1980]

Great work, man! This was the first video of yours I've seen, and I love the extreme closeups of cuts and glue-ups. It really shows how the wood fibers react and the seams close up in a way that I don't usually see.

[@FortressFineWoodworks]

Thats great that you like those. I will be filming like this more from now on. Feel free to subscribe and I'll see you on the next one!

[@svonnestickley6311]

If I could have done a WOW instead of a thumbs up I would have so I will do an OMGOSH! I am thriving to be a very precise woodworker and finding your channel is just what I needed to see. I LOVE THAT you take A LOT of time showing up close detail and explaining in detail. Some videos just kinda tell you what they did but don't really get close up enough or really show exactly what they did. I ESPECIALLY like how you explained to stop your router before you get to that outside corner right before the handle. I WISH SO much that I had a planer that was that wide. That would be awesome. I only have the DeWalt DW735. I also liked the tip to put water on the crack before you put the glue in there so you won't have glue stain. The Blue Painters tape was a good tip too when you don't want the glue to seep out onto the inside corners. I actually learned the hard way that Green Frog Tape is better and even though it's more expensive, I'll tell you why. I tested the two to see if the Frog Tape was any better than the Blue Painter's by putting each along the very bottom edge of white baseboard moulding and then a strip of tape right along the brown floor lining the edge of the floor so that it's perfectly aligned so when I spread my caulk along the bottom edge of the baseboard it will look really good. (Note: I wasn't adding shoe moulding). And even though I made sure that both tapes were pressed down tight. Sometimes, the Blue Painter's tape failed and let the brown caulk on the white baseboard the Frog Tape NEVER failed. So, by spending more money on the Frog Tape I would have actually saved time knowing I wouldn't have to go back and get the brown caulk off the white baseboard after I took the painter's tape off. Using the French Cleat system for the Back was genius! That made the cabinet really sit flat against the wall but also added strength to the holding power. I recently just bought the Dowelmax Jig and ABSOUTLEY LOVE it. After doing much research before deciding on which dowel jig I was going to purchase I bought the Dowelmax. Not only is it very well engineered but they have the BEST CUSTOMER SERVICE! I had to call them so many times because I had lots of questions on what pieces I really needed to buy and when I couldn't find an item on the website they helped me. It was also SO REFRESHING that a person actually answers the phone and you don't get an automated phone tree. I literally was on first name basis with this guy and he didn't rush me off the phone and was VERY patient. I love that you used dowels! They really are a great choice. All I really want to say is... I CAN'T REALLY SAY ENOUGH about how much I loved this video. I also actually liked when mistakes happened because you showed us neat ways to fix them and when you had the bug hole or the one spot where you had to put glue and wood dust. The project really did looked like White Oak when you were finished.

[@FortressFineWoodworks]

That's truly awesome that you gained so much from my content already! I will have to give frog tape a try again (I used to have problems with it coming loose). Thanks for watching and I hope to see you back!

[@ExpectMiracles55]

That;s one hell of a post. I enjoyed so much about your enthusiam! Carpentry is one of my passions and I can tell you're very passionate about it too, hence my reply. I wish you great joy in your learning and growth as a carpenter!

[@rrpp1425]

Excellent end product, tutorial and video production.

[@FortressFineWoodworks]

Much appreciated! Thanks for taking the time to comment

[@revolutionautoworks777]

Like the design overall, the precision though... another level. Great job and you can see the results from your planning and design.

[@FortressFineWoodworks]

Thanks, I appreciate that! I hope to see you back!

[@jak493]

Whilst you have amazing woodworking skills and build some incredible furniture, to say ‘do this instead’ when your tools alone are worth more than the finished project means most of us can’t when the toolset of an average diy fan doesn’t come 10% close

[@FortressFineWoodworks]

I appreciate your thought. The phrase "do this instead" is referring to the fact that white oak is expensive, so use red oak instead.

[@ronaldpomeroy9861]

This is so perfect - I’ve been wanting do this exact thing in my main bedroom with a suspended chest of drawers instead of a media cabinet. The wall configuration is almost identical to what’s in this video. So many great design and execution tips! Thanks!

[@FortressFineWoodworks]

Well that's perfect then! Good luck with your project!

[@melsyoutube]

the thumbnail is so cute, i had to click

[@FortressFineWoodworks]

I'm glad you did! Thanks for watching

[@FortressFineWoodworks]

Give another video a try. I'm sure my content wont be a let down

[@mikeg3317]

GAY

[@V1N_574]

So cute I wanted to subscribe but I was already subscribed 😭

[@justtestingonce]

Simp!

[@jacobf88]

I would have had to relocate those light switches or hid them somehow. The craftsmanship of that wall is too great to slap plastic over covers over it. Amazing work.

[@FortressFineWoodworks]

That makes sense. They seemed to match and blend in with the black trim and TV so it worked!

[@shaunbailey1033]

I really can’t believe you still only have 29k subscribers! Your patience and attention to detail are fantastic to watch.

[@FortressFineWoodworks]

Hopefully the odds will be more in our favor as we move forward. Thank you for watching, listening, and commenting! It helps more than you know!

[@jesperth.petersen8386]

Awesome work, and I’m really impressed about how well the edge safe turned out. The overall look of the wall is exquisite!

[@FortressFineWoodworks]

I appreciate that!

[@atomicsmith]

Wow! Beautiful work and great attention to detail.

[@FortressFineWoodworks]

Thanks so much!

[@nondanelson9553]

Your voice is very soothing to me. I enjoyed your shared philosophy on how we each get to choose the quality of our work. God bless your family and your ability to continue woodworking.

[@FortressFineWoodworks]

Wow, thank you! I appreciate you taking the time to leave a positive comment!

[@sigung01]

Look, you're a smart guy, I love what you've done here. That being said, language is important, and it's especially important with regards to your public image. With the greatest of respect, I would like to inform you that he past tense of the word "cost" is "cost", not "costed".

[@Limosical]

I came to leave this same comment, great video but this hurt a little every time I heard costed. Costed would be appropriate if somebody was calculating the cost, eg Sally costed the festival supplies before sending it to the organiser.

[@FortressFineWoodworks]

Thats very true. I didn't even realize. Thank you

[@FortressFineWoodworks]

I appreciate everyone's attention to detail!

[@Ekrindul]

​@@FortressFineWoodworksYou shouldn't. They aren't correct. While costed isn't commonly used that does not make it improper. A simple glance at a dictionary will show you they are mistaken. Costed away.

[@TroyWarr1980]

​@@FortressFineWoodworksI'm glad you took the feedback in stride and didn't feel accosted

[@mortenhansen9651]

This is so amazing and inspiring. I like how you also shared the mistakes you made in the proces and how you solved them. That just makes it even more impressive. True craftsmanship!

[@FortressFineWoodworks]

Thanks for the feedback!

[@vitalmakhdum]

Wood is expensive..so make sure you have 10k worth of equipment

[@FortressFineWoodworks]

More like 100k but here's an accent wall I built with far less machines kzbin.info/www/bejne/n6HCoZaOn7mHkKMsi=garCBJ8Rh9-mmePR

[@clue___]

I love the music at 3:28, sound like an incredible beginning to a cool song

[@FortressFineWoodworks]

Thanks so much!

[@flamabl1]

No....... nothing "costed" any amount.

[@FortressFineWoodworks]

I know, I should quit woodworking and go back to elementary school English class!!

[@fmrana]

Excellent demonstration of craftsmanship and cost control. Good to see that while you have high end Festool tools in your arsenal, you are also not averse to being practical and using Harbor Freight clamps (a ton of them!!!). To be fair, you should list them in your "Tools and Products I used", even if you don't get a "fraction of the proceeds". Thanks for sharing your knowledge.

[@FortressFineWoodworks]

That's actually a great point. Thanks for mentioning that. I will see if I can get a harbor freight link

[@Mike-dy8bq]

Thanks for sharing this. Your work is so CRISP! I really appreciate you showing us how you recover from mistakes that are made during the process. Building things can be pretty straight forward, but the real skill is knowing how to fix the inevitable things that will, without doubt, show up.

[@FortressFineWoodworks]

I appreciate that a lot! I agree, it's how you fix things that makes you a great creator!

[@Matasky2010]

For clarity- building things is only 'straight forward' when you have the adequate skills and planning ability.

[@eric_aethos]

it's deceivingly challenging to do something so simple in such a beautiful way. hats off, man!

[@FortressFineWoodworks]

It is rather deceiving huh? So much work can go into a simple design.

[@ExpectMiracles55]

Very glad your channel showed up on my feed. Your crafsman/showmanship is of the finest, an artist who uses carpentry as his main medium, and you come with a bucketfull of great tips. That bespoke wall? I'm blown away, you literally NAILED IT! Got a like and a new subscriber.

[@FortressFineWoodworks]

That's one of the greatest comments of all time. Thank you kindly! I appreciate you taking the time out of your day to respond!

[@ExpectMiracles55]

@@FortressFineWoodworks Thank you for such a nice welcome as your newest fan! I can't help you as a sponsor or any other of my few favorite channels, being retired on low income, however I'll do what I can by reading the comments and giving likes to help make the video as relevant as I possibly can, because it IS.. I also plan on watching all the previous videos which I just know I'm going to love. Thank you and be well!

[@noraconnelly2584]

I absolutely LOVE your attention to detail, your patience & I'm most impressed with your ability to math! Seriously, I get so overwhelmed with the math sometimes 💯 I'm completely in awe of your precision and the beautiful outcome. Perfectly done! ❤❤❤❤ Thank you for sharing!

[@FortressFineWoodworks]

Thank you so much for watching and taking the time out of your day to comment such a wonderful thing! I hope to see you back!

[@SilverFox-1212]

I read a story about an apprentice cabinet maker that was apprenticing with his father the master cabinet maker. They were down to putting in the back panel of the cabinet and the son asked his father why he had chosen to use the same expensive wood for the back as they had on the front of the cabinet. He said it would save them money and besides no one would see it so who would care. His father the master cabinet maker simply replied, “I would.” And that’s what makes a master woodworker!

[@FortressFineWoodworks]

I totally agree. It will haunt us forever if we don't try our best! Thanks for the story

[@5280Woodworking]

Spectacular results. I’ve used Rubio Mint pre color to get a similar look. Going to try the grey next time. Well done.

[@FortressFineWoodworks]

Yep, that would look great as well! Thanks!

[@texaswoodworks8853]

Amazing work. Can't believe how much that red oak doesn't look like red oak in the end. Thanks for sharing.

[@FortressFineWoodworks]

It's pretty cool huh? Thanks!

[@Jeffnvz]

Stunning outcome. But if I were you, I would spray the mdf and the bottom of the wooden strips that touch the ground with oil-based product to prevent them from accidental water damage.

[@FortressFineWoodworks]

That's a good idea

[@douglee650]

27:36 I saw somewhere that tear out can be related to the angle of the saw blade as it's cutting the finish surface. On the upside down cut, is the blade cutting up on the grain, raising it up, whereas right side up cut blade is cutting down into the material

[@FortressFineWoodworks]

That's exactly what's happening!

[@TheFacilitiesOfficer]

Absolutely stunning, will steal the panel design to put on the ceiling of my campervan 😊

[@FortressFineWoodworks]

That will be an awesome ceiling!

[@zachklaphaak441]

29:52 talk your client into wrapping the corner with oak, stopping the base like that looks like gak. The edge of the oak is already visible on that wall plane and it'll tie everything together, match the door trim reveal or something like that. Or, just chalk up the W and move on to the next project.

[@FortressFineWoodworks]

We went through a lot of pre-planning stages and this is definitely the extent that they wanted to go. I appreciate the feedback!

[@coltongerber1879]

14:53 Cutting a coping joint to cope with the little mistake on the miter. Chef's kiss.

[@FortressFineWoodworks]

Sometimes you just have to cope with the flow of things! Thanks for watching!

[@dngriffiths8105]

Super job. Your care and attention to detail really paid off.

[@FortressFineWoodworks]

Thank you! Its always nice when the details go together well!

[@zephyr1408]

You should be proud of yourself including your Gorgeous helper! I know how much effort goes into those projects ! Even just a set of storage cabinets I did for a customer! Great job!

[@FortressFineWoodworks]

We both say thank you! Yeah, you definitely know then, this stuff is a ton of work!

[@zephyr1408]

@@FortressFineWoodworks I see your attention to detail and getting the most from your tools. About 3/4 yrs ago I branched out into fine finish work (trim) and now I offer things like windows doors (cutting them in and installation ) . The profit margin is really good and allows me to take on stuff like I really enjoy cabinets , trim work ! I would love to hear about your dance to keep things open ! That would be a great video ! I believe we are just seeing 10% of your carpentry talent !

[@FortressFineWoodworks]

Thats a great idea! Im glad you like what you do. I share a lot of the extra stuff on my patreon.

[@richardpeterson7714]

Beautiful workmanship. Just love the attention to detail you put into your projects.

[@FortressFineWoodworks]

Thank you very much! Its really nice of you to take the time out of your day to comment that!

[@Hiksan5]

Great contenet. A real craftsman sharing professional knowledge from own experience. Much appreciated!

[@FortressFineWoodworks]

I appreciate that! Thanks for watching!

[@DIYerGuy]

Absolutely Wonderful Job, I'm blown away! You mention and show some of the mistakes you made... I am reminded of that well-known saying, whom I forgot made it... Oh yes... I think it was me... "The skill of a craftsman is not so much reflected in his final work, but in how he is able to conceal his faults!" 😀 Seriously though, we all make errors, even the best of us. But your work, judgment, and final product are a true testament to your remarkable craftsmanship! I only wish I had the wonderful space you have to work in!

[@FortressFineWoodworks]

Thank you for such a kind compliment! I hope you have a wonderful space to create in!

[@RuneCarverLLC]

Beautiful work!!! 👍👍👍 🤔 White-washing red oak slightly and a little sanding gives it a fantastic "white oak" appearance.... at least on smaller projects, and tbh I've never done large furnishings in white oak, but as a "prep-boy (LOL) I have done miles of red oak with various stains... and your lightening stain works well too, but was not available to use as it was way to expensive for a custom prep shop, so... 💁💁💁

[@FortressFineWoodworks]

Yeah very true. Red oak isn't too bad though! Thanks for watching!

[@imacyclepath440]

Absolutely beautiful work. That being said, I hope the homeowner is an absolute neat freak because a slat wall is an insane dust collector. To keep it perfect will require vacuuming the wall weekly.

[@FortressFineWoodworks]

They are very clean. Thanks for the tip!

[@rossk4864]

Great job, and one of the best woodworking videos I have seen! Great craftsmanship as well! I have used red oak in the past and I actually like its natural color and grain.

[@FortressFineWoodworks]

Awesome! Thank you! Red oak isn't too bad huh?

[@jewdd1989]

I’m glad you used red oak, white oak is used all the damn time including walnut so it’s enjoyable to see appreciation of other species

[@FortressFineWoodworks]

Yeah I agree. I have a new found appreciation for it. Thanks for watching!

[@mileshh515]

Buddy you really need a new saw blade, maybe two. Dedicated ripping blade will cut down your effort a ton, and a crosscut blade will help with tearout. Time is money! The finished product is stunning, amazing work. Really shows that proper planning pays off. Subscribed.

[@FortressFineWoodworks]

Yah you're right, I need some new blades for sure! Thanks for watching and subscribing!

[@batinsse]

I just discovered your channel and oh man, what a gem. You provide so much high quality info and tips. I genuinely feel like I'm stealing something when I watch your videos. Thanks you!

[@FortressFineWoodworks]

That's great! I'm glad you're enjoying our content! See you on the next one!

[@marshallsnyder2364]

Corey, thank you doing it the right way, even if it’s more difficult. That’s the best I’ve ever seen red oak look…I need to spend more time with the selection process. Turned out spectacular as always. Also, thank you for the stickers…much appreciated!!

[@FortressFineWoodworks]

Give it a try! Wood selection is another art in itself. Thanks for being a wonderful patron!

[@steveferguson1232]

Your attention to detail is next level, and your thought process is great. Your projects are so good. Do you do the designs for your customers or do they tell you what they want and you design from there.

[@FortressFineWoodworks]

I really appreciate that. Most customers have an idea with some inspiration photos. Then I take some of the designs they like and the measurements of the space, and design a piece that fits their needs

[@ess29123377]

Absolutely first class workmanship, you need be extremely proud of what you produced and an education to watch ..... thanks

[@FortressFineWoodworks]

Thanks so much!

[@thomasrichmond7989]

An awesome job on an amazing project. The hanging cabinet turned out great.

[@FortressFineWoodworks]

Glad you liked it! Thanks for watching!

[@deandugas1591]

I notice the cabinet top was not even against the wall slats. Tip: don't glue the MDF panels to the wall just in the vicinity of the expected french cleat. Then the cleat should pull all the slats hovering over any wall hollows into tight alignment. or use a mock up cleat box say 8" wide (instead of the full cabinet depth) to pull the panels into line while the construction adhesive dries.

[@FortressFineWoodworks]

Look at the final shots. It was tight after I added the screws to the inside of the cabinet. Thanks!

[@tealkerberus748]

That's a beautiful project, and very satisfying completion. Kudos!

[@FortressFineWoodworks]

Thank you very much!

[@andrewh3730]

Really nice look. I love red oak! Great idea too I thought using the mdf to put it on seems to make the job that much easier. Thanks for sharing.

[@FortressFineWoodworks]

Ya, that flat surface helps! Thanks!

[@villeneuvewoodworks]

Awesome build! I finished some red oak office portions a few weeks ago

[@FortressFineWoodworks]

That's pretty dope! Thanks for watching man!

[@mariasaha8303]

This was fascinating! Your skill, patience, experience, and attention to detail is just amazing. Beautifully shot as well❤.

[@FortressFineWoodworks]

Thank you so much for watching! I appreciate you!

[@flufwix]

That wall and cabinet are things of beauty ❤

[@FortressFineWoodworks]

Thank you!

[@designerdavid1]

This was an awesome work of art. I can’t wait to try a similar build for my office.

[@FortressFineWoodworks]

That will be really nice for an office!

[@monteglover4133]

Beautiful job and impressive! You successfully mimicked the look of white oak with its bland and boring look, I’m a fan of the look and warmth of red oak.

[@FortressFineWoodworks]

I think it's awesome that everyone can have their own opinions!

[@leomcnamara8711]

Not sure about hardwoods such as oak, but I have had very good luck removing dents in my woodworking projects (Softwood) using copious amounts of STEAM from my handheld steam cleaner (The type that is used for stubborn gunk in the house and car). I got mine on Amazon for about $45.

[@FortressFineWoodworks]

That would be a handy tool to have if you work with softwood.

[@Clintotron]

I LOVE red oak. I think it definitely gets more than its fair share of hatred. With the right grain and finish (clear, of course), it can be a warm and stunning medium for artistic expression.

[@FortressFineWoodworks]

Yeah, it's a good one! Thanks!

[@Clintotron]

@@FortressFineWoodworks for clarity, the finish you used to achieve a desired look worked quite well, and from the screen looked indistinguishable from true white ash. Kudos for trying something you don’t like. Just like I try watermelon ever season. Lol

[@suzannebeyer5369]

That was a nutty amount of math and hard work. I hope they realized how much work that was!

[@FortressFineWoodworks]

Thank you! They are very grateful and wonderful customers. Thanks for watching!