Parkside PMB 1100 Metal Band SAW Unboxing and Test LIDL PART 1

#Parkside
#BandSaw
#ForWorkAndFun
Info Facebook
/ forworkandfun
Support the Channel! PAY PAL DONATE
www.paypal.com/donate/?cmd=_s...
parkside.6f.sk/2019/10/24/paso...
PMB 1100 A1
stacionárne alebo ručné použitie
nastaviteľná rýchlosť pásu
zabudované LED pracovné svetlo
na rezanie kovových rúrok a profilov
prídavné držadlo nastaviteľné do viac polôh
plynulo výkyvný pílový oblúk s uhlovou stupnicou
jednoduché upevnenie k pracovnému stolu
1100 Watt
uhol šikmého rezu: 0 - 45°
otáčky: 0 - 290/min.
rýchlosť pílového pásu: 0 - 2,4 m/s
dĺžka sieťového kábla: cca 4 m
rozmery: cca 52 x 28 x 18 cm
pás: 1140x13x0,65

[@sannstuart]

*Phenomenal portaband. Worth the wait in replacing my stolen previous model **MyBest.Tools** Variable speed, with an adjustable governor, adjustable shoe, and locking articulating forward handle. It's beefy, but feels just incredibly well built and solid, will eat through strut, emt, rigid, all thread, whatever, all day.*

[@FORWORKANDFUN]

Thank you for watching just got 10000 views. I am working on another part of the Parkside PMB 1100 to replace the cutting plate Milwaukee So have fun and next time we reach 50,000

[@makisefthimiou1882]

very usefull video, its a litle bit noise but if it cuts straight noise is not a big deal,for what you pay.....

[@FORWORKANDFUN]

@@makisefthimiou1882Thank you for watching. Well thank you. I'm glad you liked it

[@FORWORKANDFUN]

Thank you for watching. I achieved1000 wiev next reach 10000 GOGOGO

[@--riddle--]

I see that works pretty good, no sparks, no extensive heat, no mess around.

[@2limbo]

Well done test and pleasure to watch.

[@FORWORKANDFUN]

Thanks Subscrible chanel

[@peterlokihorvath]

Len tak dalej !!!good jobs

[@FORWORKANDFUN]

Ďakujem..

[@petr9438]

Ta hudba je strasna 💣

[@FORWORKANDFUN]

Súhlasím

[@lura878]

Zlaty su ty chlapci 👍🏻 mate aj moj lajk 😀

[@FORWORKANDFUN]

Ďakujeme.

[@peacefulmansk1196]

Máš lajk. A chalanom vysvetliť ,že toto fakt za žiadnych okolností nechytať. Pásovú pílu považujem spolu so sústruhom za najnebezpečnejšie stroje v dielni.

[@FORWORKANDFUN]

Môžem len súhlasiť.

[@josefmusil2307]

Hezký kluci. Šikulky ;-) . Hezká změna, chválím vaší tvorbu.

[@FORWORKANDFUN]

Ďakujem

[@mihaitzo]

I bought one and in my case this product had a arhitectural problem! For household use you can cutt anything! Stainless, nonstainless, wood, PVC, brass, copper, etc Problems in my case: 1- the original cutting band, after 20 cutts in stainless steel( D 40mm with 2mm wall) just broke! The band had multiple cracks 2- unperfect cutts 3-unstraight cutts 4- got a new band with same parameters this time for real from M42 material! It was immmpossible to tension it, had to improv! After 20-25 cutts in construction steel, snapt again( snaped at the weld, warranty problem) got a second band, this time it was ok with tensioning, after 20-25 cutts it snapped again! Welded my self, after 30 cuts, broken again! Inmmy case the machine had an angle problem between the turning wheel and the allinament bearings, the angle was to much to bear for the band so at almost the same number of cutts, the band snapped!

[@FORWORKANDFUN]

I haven't had a problem with the belt yet, but I don't work that often

[@bocadecao.marionetas.puppets]

We had the same problem.. the new band dont fit. How did you do it? We bougt new sise, litle smaller and it impossible to tension perfect...

[@cheftipp]

Does someone know if the saw could get problems by using cutting oil? Maybe through the loss of friction or a dirt mixture of oil and chips in the drivetrain?

[@FORWORKANDFUN]

it can be lubricated only very gently and the drive must be cleaned regularly from chips with flesh

[@danielbichokov1340]

Hi, how long do you think the blade will last ?

[@AStran-su4of]

OK nice video by WHY this unnecessarily LOUD and irritating music. Is this a music video? Are you some kind of DJ?

[@FORWORKANDFUN]

Hi, I'm not a DJ. .. Music only covers the audio flaws of the video. But I'm trying to suppress it

[@taskhunters5245]

Nice one guys😉 I am about to buy one of this saws. And your vid has come out first. Good your boys are the best part👍 Stay safe my friend💪🌟

[@jameslai433]

Mine doesn't cut at 90° at all...it's all set to 90° and I've double checked but it still cuts at a angle

[@rafalmag]

I ordered B2 model. First time it delivered with a case with red handle, which broke before courier brought it from car to my door. Packaging was not complete either, so I returned it and reordered. Second time it arrived in well package box with a lot of Styrofoam, but no case! Be aware.

[@2limbo]

I am using this saw for a few weeks now and I am pleased with it (especially considering its price). I noticed the arm has a little movement. This because the base-plate is of thin metal and underneath is a support bracket which is welded to the sides and not to the base-plate. I welded this bracket with a few tacks to the base-plate and now there is hardly any movement.

[@alexandrugeorge1573]

is the cut straight after welding bracket to the base-plate, or is it the same ?

[@martinstraciak8838]

tuto pilku som zakupil hned ako bola v predaji. za tu cenu nema konkurenciu. avsak musel som na nej spravit par uprav: 1) nove vykyvne rameno na stojan-nastavitelne, aby sa dala pilka nastavit na presnejsie rezanie 2) premiestnil som zverak kus dalej a doplnil o pasovinu az cca 5mm k pilovemu listu, aby mal rezany material lepsiu oporu co najblizsie k pilovemu listu 3) doplnil nastavitelne dorazy na 0° a 45°. teraz odrezem aj 1mm (+- 0,05mm) kus z jakla 80x80 pod uhlom 90° (+-0,1°). este ma caka dorobit koncovy spinac na automaticke vypnutie ked pilka klesne na samu spodnu uroven po rezani a automaticky sa vypne.

[@FORWORKANDFUN]

Ja to mám tiež na pevnom stole upevnené a je to tak SUPER.

[@lucacalicchio8651]

Buon giorno, bello anche questo video !!!

[@FORWORKANDFUN]

Ciao. Bene grazie.

[@tricacch2678]

De ce nune arati cum se debiteaza la 45 grade aceiasi teava de 40x40 ceva mai lunga nu doar un capat ca nu merge nici de 30x30mm la o lungime mai mare de 10 cm

[@ivanperac834]

i joust bought it and works fine only problem it cant cut 40x40 in 45 degre angle when pipe is a bit longer lets say 15 cm... didnt try biger pipes....

[@jaromirbulir9124]

ok vše jak má být , zdá se že je to dobrý výrobek...

[@FORWORKANDFUN]

Áno je to dobre za tie peniaze.

[@carlopalladino5595]

🤠👍

[@gotzolones]

It does not make the cuts straight. I'm thinking of buying it in lidl but that problem makes me doubt

[@FORWORKANDFUN]

For electrode welding, the cuts are OK, and it can be finely finished

[@taskhunters5245]

One thing you may want to change is to get yourself new camera. Perhaps A7 III😉

[@jovicabogavac3587]

Dobra mašina...

[@FORWORKANDFUN]

Áno je to veľmi dobrá masina. Určite sa oplatí kúpiť.

[@dawetv4811]

Chcem sa spytat ja ju chcem kupit len neviem ci sa ta kupit aj novy pilovy pas. Dakujem za odpoved

[@FORWORKANDFUN]

Ahoj pila sa určite oplatí kúpiť. Na vašu otázku zatiaľ neviem odpovedať nakoľko som to zatiaľ nezisťoval. No cez týždeň chcem kúpiť aj ja niečo do skladu a tak budem naháňať náhradný pás. Dám vedieť . Ako to dopadne a určite natočím video s touto informáciou o výmene pasu.

[@mhgarage73]

www.kobatech.sk/pilovy-pas-m42-1140x13x0-65-mm-z-5-8-bimetal-pre-pasove-pily-m4211405-8-i56850.html

[@FORWORKANDFUN]

@@mhgarage73 Pas pre tuto pili ma 1140x12.7x0.65 tak Dúfam že tieto štandardy píle sadnú Ďakujem

[@ypres_bass]

patří k tomu standardní pás 1url.cz/@parkside1100

[@hasso2721]

Is it good for stainless steel?

[@FORWORKANDFUN]

I didn't try to cut

[@mihaitzo]

It is! But the product has a problem! In my case it had!

[@FORWORKANDFUN]

@@mihaitzo With me, all right

[@rockjano]

Hi Great video!!!! Thank You very much. I am just thinking about this, it is very cheap in Liedl righ now. Do you think is it worth to buy it??? I would not use it much just the few times I need it. And I probably would cut hard wood and plastic as well with it!!! Thanks for the great video, they don't even open the box in the shop.

[@FORWORKANDFUN]

Thank you for enjoying the video. The saw is worth buying. For cutting board and wood it is necessary to change the cutting board.

[@rockjano]

@@FORWORKANDFUN Hi do you mean that for cutting wood I have to change the cutting bend??? Is it different for metal and for like hard wood??? Thanks!!!!!

[@FORWORKANDFUN]

@@rockjano I can try it on hardwood without changing the plate

[@rockjano]

@@FORWORKANDFUN YES Please..theoretically the metal cutting blade can cut hard wood very nicely (also plastic, and aluminium)

[@rockjano]

Oh and NICE KIDS!!!

[@crauhdosredunips9696]

buena maquina,pero esa musica de fondo estresante.

[@FORWORKANDFUN]

Hola ya no tengo musica en videaches nuevos

[@Winston-hw8wb]

yeah stupid music/noise

[@petrosxontros594]

how much money her market has made

[@FORWORKANDFUN]

saw costs 99.99 euro

[@charlescarabott7692]

@@FORWORKANDFUN quite cheap for a metal cutting saw.

[@Adamfront]

Had to turn the sound off because of the terrible music.

[@zoltanpapdi7412]

hol vásárolható ez a vágógép?

[@FORWORKANDFUN]

LIDL hálózat

[@istvanpanti8176]

A héten volt akcióban a lidl-ben. Az enyém széthullott. Összerakni sem lehetett faragás nélkül. Ha nem tudom megcsinalni, akkor megy vissza gariba. Pedig jó árban volt...

[@FORWORKANDFUN]

A fűrész továbbra is elérhető SLOVAKIA

[@rockjano]

@@istvanpanti8176 Szia Éppen ezen vívódom hogy szabad-e ilyet ennyire olcsón venni...mit jelent az hogy széthullott??? Nagyon köszönöm a válaszod előre is.

[@istvanpanti8176]

@@rockjano Nem tudom egyáltalán még van-e valahol. Nem láttam még ilyen gépet ez előtt élőben, de szerintem vagy alkatrész hiányzott róla, vagy konstrukciós hiba van, vagy gyártási hiba. Ott kezdődött, hogy a satut az asztalra nem lehetett felszerelni. Vagy el volt az asztal vetemedve, vagy félre fúrva, de sehogy nem ment. Két furatot fel kellett bővítenem. A fűrészt nem lehetett 0°-ba állítani. a félköríves csavarpálya nem engedte. Azt meg kellett reszelni. Két vágás után ledobta a szalagot. Még pár vágás után kihullott a felső szalagvezető csapágy csapostól és ezért a szalag megint leugrott. Megrágta a gumi szalagtovábbítót is a hajtó keréken. Kb. ennyi volt. Tegnap visszavittem. Arra jó volt, hogy tudom kell egy fém szalagfűrész a műhelybe, mert tetszik, hogy nem sarokcsiszolóval kell darabolni. Nem szikrázik, nem tiszta bakelitpor minden. Tömör anyagot is lehet vele vágni.

[@goranpantic4482]

Koliko kosta ova masina i kako naruciti

[@FORWORKANDFUN]

U Lidleu koji se prodaje u listopadu 2019. za 100 eura Atreba samo čekajući još jedan događaj ne može se kupiti u E-trgovini

[@user-ug9nn]

nice review... so the saw can't cut at 90 deg so is Lidl/China classic junk, that need extra improvement, or just simple not buy ...

[@FORWORKANDFUN]

She drank my shortcomings and also can't always be bought.

[@user-ug9nn]

@@FORWORKANDFUN understand ... is better than nothing ... I also need one to cut blanks on my little lathe, blanks that can't be cut with anything else ... and also one cheap as is for "home use" intention, so I will end buying one from Lidl or somewhere else ... so I look on internet review like yours to see if this kind of tools is suited for my needs ... so thanks for sharing your review...

[@pirigato]

La venden en España

[@albertogarcia5276]

si, la puedes comprar en tienda por 100 euros o en la web por 100 mas 5 de envio

[@felipearias703]

@@albertogarcia5276 donde se puede encargar?

[@Reman1975]

These area REALLY cheap and tacky power saw.......... BUT, The price is so ridiculously low that if it only lasts a couple of years it's still going to be good value ! I only bought one because, for the 2 or 3 meters worth of sawing I do in 3 to 6mm mild steel angle iron per year, it was a price I was happy to pay if it ment I didn't have to slog on with a hacksaw anymore !!! Parkside has been around for a while now and I think it's quite unlikely that they're going to go bust before this things 3 year warranty runs out, So as long as I don't do anything that could be described as "User abuse" to this it should be a pretty safe purchase.

[@Reman1975]

Update - The one I originally bought had something go south in the gearbox last night, I'd only used it for a few cuts in 3mm aluminium box section up to that point, but everything seemed fine. As soon as it's blade met 3mm angle iron last night though it started skipping cog teeth !?!?! Oh well, These things happen. Took it back and they replaced it without any hassle, But I've just tested the replacement to find the speed control switch only works on it's full speed ?!?! I'm going to go back again in a minute to either get a 3rd, or to get a refund. I'm starting to wonder if I've just been very unlucky, Or if quality control really is this bad on these. I'm leaning towards me being unlucky at the minute as I haven't found any bad reviews on these yet, But if I get a 3rd and that has an issue, I think that may push my opinion of Parkside's products right down. :(

[@charlescarabott7692]

@@Reman1975 im thinking of buying one but some in comments are complaining about the quality of this product. Usually parkside products are quite good for the price. Could be that parkside are lowering their standards to cut costs maybe?

[@felipearias703]

Como puedo comprar?

[@FORWORKANDFUN]

Tienes que esperar hasta que vuelva a estar en la oferta de LIDL

[@dominikvavro6276]

Kde sa to dá kúpiť ? Ďakujem ...

[@FORWORKANDFUN]

Ahoj. Ja to mam z LIDL obchodu. A momentálne sa to nedá kúpiť ani na LIDL eSHOP.

[@dominikvavro6276]

Vďaka za odpoved, aj som si myslel, lebo nech zháňam kdekoľvek nikde sa k tomu nemôžem dostať ... ani na nemeckom ani na českom e-shope ... tak reku či nepoznáte náhodou nejaký aftermarket ... lebo jediná možnosť mi ostáva od Schepach ... lenže ta je o 100€ cca drahšia a príde mi to to iste ...

[@FORWORKANDFUN]

alebo BAZAR.

[@dominikvavro6276]

Nedá sa :) vyrobili asi len pár kúskov ktoré máte vy :D takže som objednal práve schepach... tak uvidíme ci bude niekde vidieť tých 100 E navyše....dakujem Vám za odpovede ....

[@FORWORKANDFUN]

@@dominikvavro6276Nie je za co. Poslite link ta ten secheppach

[@guntersmit6715]

Kann vor Werbung kaum laufen das Video. Grässlich

[@nianiucha21]

Ciac tnie ale kontow nie trzyma

[@mariakenderova6475]

noo..treba nastavit !

[@tomtomtom3656]

Pilový list je potrebné premazávat proti prehriatiu olejom, znižuje sa opotrebenie, na sucho rozhodne nerezať!

[@FORWORKANDFUN]

Po primazavani olejom sa veľmi zanášajú kolesá pilinami a masnotou. Následne dochádza k presmyknutiu pasu. Z olejom veľmi opatrne.

[@vitafirt8245]

Tak třeba Pilous nedoporučuje nikdy pás mazat, ničí se hnací kola. (na olej se nalepí ocelové piliny a olej to roztahá všude po pile) Chladí se emulzí k tomu určenou, a to ještě né vždy je nutně zapotřebí.

[@matuscichy2401]

Dnes som ju kúpil za fantastických 59.95 €..

[@FORWORKANDFUN]

No perfektná cena.

[@dominikvavro6276]

Wow a to kde ? Nedokážem nikde zohnať ...

[@FORWORKANDFUN]

@@dominikvavro6276 Určite bola v akcii bežne stoji 100 euro.

[@mladenmarkovic9141]

Ubi me sa tom glazbom i fokusiranjima. Pričaj nešto.

[@FORWORKANDFUN]

Novi video zapisi već su sinkronizirani. kzbin.info/www/bejne/b5qZaaFve917jdk

[@larseriksson1741]

Musik and video 😢

[@TheDutan]

vsetko super ale ta "hudba" to uz bolo moc

[@FORWORKANDFUN]

Je to moje prvé video, prvý pokus začať tvoriť niečo na YT. Ktoré ma presvedčilo tvoriť videa pravidelne na tému Hobby naradia. Ak by nevyšlo, čo sa týka sledovanosti dnes by som videa nerobil. Tu som to skúsil a videl som že to ide. Ak chceš pozri si toto video po roku používania.

[@vladislavkravtsov2005]

Рез не ровный

[@Flyingjos]

OMG...please turn off this awfull music

[@chrisgleeson255]

SLOW AND BORING!

[@michalhruska5090]

Na jednu stranu coby strojař beru, že můj názor je zdeformovaný tím, že vím, jak vypadá opravdová strojní pásová pila. Toto je strašná hrachovina jak se to celé kroutí, jak křivě to řeže, nemožnost chlazení řezu,... Ale na druhou stranu musím uznat, že na takové to domácí šmidlání asi mnohem lepší a přesnější jak flexa. Ale osobně bych potřebu podobného řezání v domácích podmínkách řešil pokosovou pilou na kov. Tuhost a tím přesnost úplně jinde, cena přijatelná.

[@FORWORKANDFUN]

Tato pasová pila je v podstate ručne náradie len ma možnosť rezať aj na stolíku. Nie je to teda plnohodnotná dielenská pasová pila. Určite to môžem odporučiť na rezanie miesto uhlovej brúsky ala aj namiesto rezania poosovou pílou a kotúčom na železo. Kotúč je veľmi dráhy a jeho životnosť je nízka. Aspoň ja mam takú skúsenosť.

[@michalhruska5090]

@@FORWORKANDFUN ok, beru, taky prohřádí materiálu je menší. Bezpečnost při práci naopak u této pásové pily mnohem větší jak u pokosové pily nebo flexy

[@FORWORKANDFUN]

@@michalhruska5090 Áno pri pílení pokosovou strašne fŕkajú triesky. Časom keď bude treba tak kúpim lepšiu pásovku.

[@michalhruska5090]

@@FORWORKANDFUN Otázka jak moc dobře jde našponovat pilový pás, případně upravit vedení pásu, třeba by se to i zpřesnilo. Já osobně mám na doma hodně věcí z lidlu k naprosté spokojenosti. A kombinuji tyto stroje s profi nástroji - myslím např. vrtačka parkside (cena/výkon nemá na trhu konkurenci, životnost na domácí použití ok) + profi vrtáky dewalt / bosch (prostě nejaký hss, kobaltové spíš do sloupové vrtačky s obrobken ve svěráku, v ruční rády praskají břity). V testech dewalt super, za ještě rozumný peníz. bosch lehce horší a o trochu levnější. Ve firmě taky tyto dvě značky, nic jiného se nevyplatí.

[@giuseppebellantoni9493]

Con qualche modifica sicuramente funziona meglio